My team has configured ReSharper/Rider to automatically run code-cleanup every time we save. I save a lot, which means code-cleanup runs a lot. Every time I try to Ctrl+Z past a point where code-cleanup ran, Rider prompts me with a pop-up asking if I really want to undo.
Is there a way I can disable this prompt? It's very annoying to move my hand from my keyboard to my mouse every time just to click "yes". I wouldn't have pressed Ctrl+Z in the first place if I didn't want to undo.
To be clear: I'm not trying to disable automatic code-cleanup on save.
I have already tried goolging this question. The only answers I found were about code-cleanup itself, not about disabling the confirmation upon undoing it.
Related
I have tried all the possible solutions to solve it given in the internet. But my problem does not solved.
So I want to reset my pc. If so is my pc get back to normal state. Previously I have resetted my pc for another problem. Is my resetting option works again. My friends said that reset options works only once...
Can anybody suggest me what to do??
The issue here seems to be that Windows thinks you have a new monitor that does not exist.
The most common solution that seems to have worked for many people (did not actually work for me, but worth a try): Wait long enough so the mouse cursor to appear when you move the mouse. (blank screen with a white mouse cursor) Then press the Ctrl and enter your login password. Wait until login competed then press Win+P keys, down arrow keys twice, and enter to extend display. (this spans your monitors onto one display)
The solution that worked for me was to unplug all monitors, reboot (hard reset, holding down power button), then plug in just one monitor. (may need to reboot again)
I solved the issue by pressing
Press Ctrl+alt+Esc.
Task Manager Window Appears,Then Click File
Option above,then Select Run New Task from the options that are
listed.
3.Create New Task Window appears and type "explorer" and press Ok. Screen Appears and Restart your laptop again .
You can try the following solution. It works perfectly. 1. Press Ctrl+alt+del 2. Select Task manager 3. Select File option above 4. Click Run new task 5. Type "explorer.exe" and press Enter You'll screen appears again!!
Okay, so I have a Compaq laptop [American keyboard].
It is a few days that the backspace button is broken - I mean, it is totally popped off. It ought to be replaced but it is hard to find it out.
Now, I was wondering whether or not there was a way to change the functionality of another button so that it can replace the functionality of the backspace button.
It is not the DEL button. It is the BACKSPACE button [above the Enter button].
I knew that through some binary numbers it is possible to change the functionality of a button. For example, I can change the DEL button in the Number Lock so that instead of working as DEL button or dot, it will work as backspace.
Is it possible?
Another way on Ankit's recommendation:
After installing the AutoHotkey, creating the short script and saving it with .ahk extension, just put the file in the startup folder :) click Start(or windows logo)---All Program---startup folder :) then re-start pc.
If on windows, you may use AutoHotkey, install it, create a file with .ahk extension and put following code in it.
F1::Send {BackSpace} ; Makes the 'F1' key send 'BackSpace' key.
Then run the above script on startup.
More Details for remapping here.
I’m currently writing an MFC dialog app which has a menu. The menu displays correctly and the menu entries work correctly via mouse, accelerators, and hotkeys (e.g., to quit: Ctrl+Q or Alt+F,Q).
Unfortunately, the Enter key doesn’t seem to work. That is, pressing Alt+F will open the File menu and pressing ↑ will highlight the Quit entry, but pressing Enter will not select it.
I know that using menus in dialog apps can be a bit tricky, but I’ve done this successfully before. However, that was a long time ago with a customized VS wizard, so I am trying to remember how to do this from scratch. I tried checking my old code, but could not find anything in reference to VK_RETURN. (No, there’s nothing special in PreTranslateMessage.)
These two questions are related, but they want the dialog to receive the key, I need the menu to get it.
Does anyone know what the problem is and how to fix it?
I am using Sublime Text 3 and every time I press tab it will add an extra tab. My settings are to display tabs as an actual tab (not spaces) and is equivalent to 4 spaces. My issue causes a single tab to therefore create 2 tabs the length of 8 spaces.
For example, if I am trying to indent it will tab twice and I will have to delete one tab.
If I select a block of text it will indent it twice and result in the text being deleted and I have to undo it once to bring the text back.
Also, when using auto complete I normally hit tab to auto complete the first option. It will select the option and do a tab after it. I am not sure if this is an option or setting but its extremely annoying and I have not found a solution yet.
Sublime Text double tabs on tab key press
Sublime Text deletes/removes text on indentation / tab
Both problems are due to a popup (most often the SFTP free version popup for me) hiding in the background. If you make sure to close the popup windows every time they appear you will not get these issues. You could also pay for Sublime or the plugin to remove the popups.
In OSX you can't focus back on Sublime Text without clicking on the popup, so you will never have these problems.
I just had the same issue. I just restarted Sublime and it worked again, no need to reinstall or change any settings.
I just encountered this problem recently, and it appears to only happen on Windows. In my case, the pop-up "Hello! would you like to purchase sublime?" was open in the background, and that caused this issue for me. Once that pop-up is closed, everything works just fine.
Although the question is three months old at the time of writing, this might help people that are still looking for an answer. After having this issue for a while, it annoyed me so much that I traced back the issue.
The double tab issue only happened after a while, so I figured it was triggered by a certain key combination, being pressed wrongly. I've also noticed that the bug only occurred at Windows, not on Linux (Ubuntu).
After disabling all Sublime Text 3 plugins one by one, I've noticed that, for me, SFTP triggered the bug. This happened upon saving, SFTP started uploading, and displayed a evaluation notice. As I've purchased SFTP (and activated it), the double tab bug never occurred again. Even after enabling all other packages, the double tab never troubled again.
This is only one solution to the problem, your problem might originate from something else. Try to disable packages which might cause the problem and try to find the problem that way. It's a lot of work, but might get you the solution.
This solution worked for me on windows:
Just go to
View -> Layout -> Single
I did some find-and-replace actions in my C++ code with visual studio:
only single find-and-replace actions (did not use “replace all”)
only one file affected (did not change multiple files at the same time)
thus, a very simple case!
Then I wanted to undo these changes. So I pressed ctrl-Z one time. This had the desired effect. The latest change (which was still visible in the current screen) was undone.
But I also wanted to undo the remaining changes. These changes where currently not visible on the screen. So I expected the editor to scroll there when pressing ctrl-Z.
But unfortunately the editor did not scroll to the position of the undo when I pressed ctrl-z.
The undo worked, however. I checked by scrolling to the position manually.
Then I tried it with redo. Same result: Redo worked, but the editor did not scroll to the position of the redo.
Finally I tried if this also happens when I undo-redo other types of changes (not made by the “find and replace” functionality).
Result: Undo-Redo worked correctly and also scrolled correctly!
Thus: It seems only changes by the “find and replace” functionality are affected by this problem.
Did you also have this problem and found a solution?
Please help me!
Regards Gerhard
I am having the same thing happen in Visual Studio Ultimate 2012 (Version 11.0.60610.01 Update 3).
It might sound like it's not that important, but it is really hurting the usability of this otherwise great IDE!
PS I've been using VS since the 90s, I still haven't found anything better. I wish MS would put macros back into VS, even if it's VBA (or Python)