I wanted to create an installer for my exe programm (with fbs). Then I saw that I need to install NSIS (Error: FileNotFoundError: fbs could not find executable 'makensis'. Please install NSIS and add its installation directory to your PATH envir
onment variable). I did install NSIS. After that, I got the same error. Can somebody help me?
NSIS does not automatically add itself to %Path% when you install it. If fbs cannot detect NSIS then I suppose you have to manually update the path variable yourself.
Hi ckeck the location where NSIS software installed.
mine C:\Program Files (x86)\NSIS
when i try to uninstall it's showing correct file location then i am adding that file location to path user variabels
Thanks,
ANR S
Try to install "HM NIS Edit", you can choose your makensis.exe following NSIS -> Configuration.
Related
I'm following this link for installing GLPK which I intend to use to conduct some optimization. When I've downloaded GLPK, and added
C:\Windows\System32 and C:\Windows\SysWOW64
to PATH for environment variables and try to execute one of the example files (even by opening the cmd window in the file where the test file is located) by doing
glpsol --model assign.mod
It says that
glpsol is not a internal command, external command, program or command file.
When I open the command in the win64 folder (a subfolder of glpk) then I can do:
glpsol.exe --help
and get information. I can also see the glpsol programfile in the folder. However when I try to open a model somewhere on my computer it does'nt recognize glpsol. Isn't that why you add System32 into your PATH?
In the guide it says that
...Therefore it is suggested to copy the DLLs to %SystemRoot%nsystem32.
Is this something that you must do? Which are these DLLs? Can you do this using a command in the cmd file? I thinking that including System32 into the path does this?
I've added SysWOW64 into the path due to me using 64 Bit Windows 7. Not sure if it is the way to go though.
Hope someone can shed some light into this!
Regards,
To use glpsol outside of the dedicated folder you have to put the relevant files somewhere, where your System can recognize them (somewhere in the defined Path Environment)
The "DLLs" are just the glpk_X_XX.dll, for 64bit systems use the dll in the w64 folder and put it in the SysWOW64. Now your System will find the dll - but still not glpsol. Just copy the glpsol.exe in system32 for that, and voilà your done.
Adding the GLPK Directory to the Environment Path should also work.
I installed tcl to learn it, however, I installed all the files in the wrong location. I am trying to uninstall it, But the uninstall file does not work. I am trying to carry out the instructions form their website:
To uninstall ActiveTcl, run the "uninstall.tcl" script that is located in the directory where you extracted the ActiveTcl archive. Note that you must use the "wish" in the distribution you wish to uninstall. For example:
% /path/Tcl/bin/wish /path/Tcl/lib/ppm/log/ActiveTcl/uninstall_ActiveTcl.tcl
stored, by default, in the directory /lib/ppm/log/ActiveTcl. You must use the wish interpreter from the distribution you wish to uninstall. Ensure that you do not run the uninstall script from a directory that will be removed during the uninstallation.
For example:
% /path/Tcl/bin/wish /path/Tcl/lib/ppm/log/ActiveTcl/uninstall_ActiveTcl.tcl
Note: if you are uninstalling both ActiveTcl and Tcl Dev Kit, uninstall Tcl Dev Kit before uninstalling ActiveTcl.
There is no uninstall_ActiveTcl.tcl. I do see an "uninstall" file but it does not have an extension, and I do not know how to run it.
Any help is appreciated
Thank you
Try editing the file to a uninstall.tcl file and see if that works. Take a back-up first though. Because we might need that file later
I re-installed it in a new location, compared the files that were installed between the old and the new location and deleted the file sin the old location. Unfortunately I could not delete many of the hidden files, as I did not know if they were there originally or if they belonged to Tcl. I am really surprised and disappointed there is no easy way to uninstall tcl properly.
I strongly suspect that you should uninstall ActiveTcl as follows:
Open a command prompt
Change directory to where you found the install file - e.g.
$ cd path_to_Tcl_installation/bin
Run the file
$ ./uninstall
On linux systems, you don't need any particular file extension in order to be able to run a file.
I don't know CentOS but a little googling led me to a forum thread that describes how to open a command prompt.
Good luck
I've got a problem where the NSIS installer is remembering the previous install location of the product I want to install after the previous version of the product is installed.
I want to prevent this behavior ... so that the installer uses the default directory I specify in the script.
Found the solution ... needed to remove InstallDirRegKey from my script.
http://nsis.sourceforge.net/InstallDir_doesn%27t_work
I have written a nsis script in which i need to prompt the user where there was previous installation and uninstall the previous version if user select the same folder as previous version.It is working fine.But suppose user choose different directory than the uninstall.exe is giving problem.
Ex-suppose user install version 1.2 in folder a and then agian version 1.2 in folder B .
Than in every case the uninstall .exe is pointing to folderb not folder a.How can i solve this issue
In the uninstaller, $instdir is just the directory the uninstaller is in so the uninstaller itself should not care.
You say you are prompting the user, so you already know the location of the old install so all you have to do is to invoke the uninstaller with the special parameter so it knows where to uninstall from...
I am trying to install mod_java on ubuntu.
I have installed the latest java(1.6).
I have configured freeswitch with mod_java module enabled in module.conf.xml
then when i run the make file, it says:
freeswitch_java.h:5:17: error: jni.h: No such file or directory
I have searched through the java installtion folders, but did not find any include folder or jni.h.
Can anyone help, what is being the problem here.
Thanks for reading this question.
I had the same problem. The solution was to run configure with the option --with-java:
./configure --with-java=/usr/lib/jvm/java-1.6.0-openjdk/include/
I don't know if it makes any difference but I added mod_java after building freeswitch without it. It was disabled in my initial build in module.conf.xml but afterwards I ran the above command plus:
make mod_java-install
It worked for me on ubuntu with openjdk. Are you using the Sun JDK? Maybe in the version you have dont have the include folder which has the source files. Try installing the other JDK. Or try and see of ther are some other related packages in apt that will get you the include folder.
Type this linux command to locate your jni.h file on your filesystem.
locate jni.h
you should be able to get it somewhere
in /usr/lib/java directory or some other directory
depending upon your java home.
copy paste the jni.h in src/include folder of your freeswitch src.
It will throw you some more errors for different .h files
just copy all of them to your src/include folder.
in latest freeswitch, installing through Makefile, its not possible to configure as the Makefile downloads and installs. Its possible by modifying the Makefile.in file to add the include path
mod_java_la_CPPFLAGS
-I/usr/lib/jvm/default-java/include \