I am trying to write a small shell script, make it go to sleep for some amount of time like 20 seconds and then run it. Now if i open another terminal and try to run the same script, it shouldn't run as the process is running else where. How do I do it?
I know i should write something, make it go to sleep captures its pid and write a condition that if this pis is running somewhere then don't let it run anywhere. but how do i do it? Please give a code.
echo "this is a process"
sleep 60
testfilepid = `ps ax | grep test1.sh | grep -v grep | tr -s " " | cut -f1 -d " "| tail -1`
echo $testfilepid
if [[ $tesfilepid = " " ]]
sh test1.sh
else
echo "this process is already running"
fi
This is what I tried. when i execute this in 2 windows, both the windows give me the output this is a process.
You could use pgrep to check that your script/process is running, and negate the output, this is a very basic example that could give you an idea:
if ! pgrep -f sleep >/dev/null; then echo "will sleep" && sleep 3; fi
Notice the !, pgrep -f sleep will search for a process matching against full argument lists. (you could customize this to your needs). so if nothing matches your pattern then your script will be called.
I'm using Git Bash 2.9.0-64-bit in win7 64bit.
Here is my shell code
function sum1_x(){
a=$1
while [ $a -ge 1 ]; do
sum=$[$sum + $a]
a=$[$a - 1]
done
echo $sum
}
sum $1
In Git Bash,my type history is as follows:
wen#PC-WEN MINGW64 /d/git/ (dev)
$sh sum1_x.sh
exit
:q
quit
quit()
exit()
After I typed sh sum1_x.sh,I can no longer execute any shell command.I tried many commands as shows.I know there are bugs in my script,but how can I get back to execute shell script facing this kind of problems? Nothing can I do now.
You have several problems with your script:
you have function sum1_x but you are calling sum $1
You didn't check that input value exists, because of it you stuck in infinite loop
Here is the corrected script with check that input argument is exists:
function sum1_x(){
a=$1
while [ $a -ge 1 ]; do
sum=$[$sum + $a]
a=$[$a - 1]
done
echo $sum
}
if [ -z "$1" ]; then # check that input parameter is exists
echo "No input"
else
sum1_x $1
fi
How to stop program:
Ctrl + 'c'
Open new mingw and find pid of the progrman via ps -aux | grep "sum1_x.sh"
and then use kill pid to kill the program
As shows in the question,the shell script contains many bugs.The command sh sum1_x.sh was wrong too.It should be replaced by command sh sum1_x.sh 9 or things like it.After I fixed these bugs,it runs without problems and print the right sum.
But I still didn't know how to shop the shell script.Fortunately,By accident,I clicked Ctrl & c,and I can input shell commands again.
I have a filewatch program:
#!/bin/sh
# On Linux, uses inotifywait -mre close_write, and on OS X uses fswatch.
set -e
[[ "$#" -ne 1 ]] && echo "args count" && exit 2
if [[ `uname` = "Linux" ]]; then
inotifywait -mcre close_write "$1" | sed 's/,".*",//'
elif [[ `uname` = "Darwin" ]]; then
# sed on OSX/BSD wants -l for line-buffering
fswatch "$1" | sed -l 's/^[a-f0-9]\{1,\} //'
fi
echo "fswatch: $$ exiting"
And a construct i'm trying to use from a script (and I am testing with it on the command line on CentOS now):
filewatch . | while read line; do echo "file $line has changed\!\!"; done &
So what I am hoping this does is it will let me process, one line at a time, the output of inotify, which of course sends out one line for each file it has detected a change on.
Now for my script to clean stuff up properly I need to be able to kill this whole backgrounded pipeline when the script exits.
So i run it and then if I run kill on either the first part of the pipe or the second part, the other part does not terminate.
So I think if I kill the while read line part (which should be sh (zsh in the case of running on the cmd line)) then filewatch should be receiving a SIGPIPE. Okay so I am not handling that, I guess it can keep running.
If I kill filewatch, though, it looks like zsh continues with its while read line. Why?
The question applies to a script such as the following:
Script
#!/bin/sh
SRC="/tmp/my-server-logs"
echo "STARTING GREP JOBS..."
for f in `find ${SRC} -name '*log*2011*' | sort --reverse`
do
(
OUT=`nice grep -ci -E "${1}" "${f}"`
if [ "${OUT}" != "0" ]
then
printf '%7s : %s\n' "${OUT}" "${f}"
else
printf '%7s %s\n' "(none)" "${f}"
fi
) &
done
echo "WAITING..."
wait
echo "FINISHED!"
Current behavior
Pressing Ctrl+C in console terminates the script but not the already running grep processes.
Write a trap for Ctrl+c and in the trap kill all of the subprocesses. Put this before your wait command.
function handle_sigint()
{
for proc in `jobs -p`
do
kill $proc
done
}
trap handle_sigint SIGINT
A simple alternative is using a cat pipe. The following worked for me:
echo "-" > test.text;
for x in 1 2 3; do
( sleep $x; echo $x | tee --append test.text; ) &
done | cat
If I press Ctrl-C before the last number is printed to stdout. It also works if the text-generating command is something that takes a long time such as "find /", i.e. it is not only the connection to stdout through cat that is killed but actually the child process.
For large scripts that make extensive use of subprocesses the easiest way to ensure the indented Ctrl-C behaviour is wrapping the whole script into such a subshell, e.g.
#!/usr/bin/bash
(
...
) | cat
I am not sure though if this has the exactly same effect as Andrew's answer (i.e. I'm not sure what signal is sent to the subprocesses). Also I only tested this with cygwin, not with a native Linux shell.
On my terminal in Ubuntu, I often run programs which keep running for a long time. And since there are a lot of these programs, I keep forgetting which terminal is for which program, unless I tab through all of those. So I wanted to find a way to update my terminal title to the program name, whenever I run a command. I don't want to do it manually.
I use gnome-terminal, but answer shouldn't really depend on that. Basically, If I'm able to run a second command, then I can simply use gconftool command to update the title. So I was hoping to find a way to capture the command in bash and update the title after every command. How do I do that?
I have some answers for you :) You're right that it shouldn't matter that you're using gnome-terminal, but it does matter what command shell you're using. This is a lot easier in zsh, but in what follows I'm going to assume you're using bash, and that it's a fairly recent version (> 3.1).
First of all:
Which environment variable would
contain the current 'command'?
There is an environment variable which has more-or-less what you want - $BASH_COMMAND. There's only one small hitch, which is that it will only show you the last command in a pipe. I'm not 100% sure what it will do with combinations of subshells, either :)
So I was hoping to find a way to
capture the command in bash and update
the title after every command.
I've been thinking about this, and now that I understand what you want to do, I realized the real problem is that you need to update the title before every command. This means that the $PROMPT_COMMAND and $PS1 environment variables are out as possible solutions, since they're only executed after the command returns.
In bash, the only way I can think of to achieve what you want is to (ab)use the DEBUG SIGNAL. So here's a solution -- stick this at the end of your .bashrc:
trap 'printf "\033]0;%s\007" "${BASH_COMMAND//[^[:print:]]/}"' DEBUG
To get around the problem with pipes, I've been messing around with this:
function settitle () {
export PREV_COMMAND=${PREV_COMMAND}${#}
printf "\033]0;%s\007" "${BASH_COMMAND//[^[:print:]]/}"
export PREV_COMMAND=${PREV_COMMAND}' | '
}
export PROMPT_COMMAND=${PROMPT_COMMAND}';export PREV_COMMAND=""'
trap 'settitle "$BASH_COMMAND"' DEBUG
but I don't promise it's perfect!
Try this:
trap 'echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"' DEBUG
Thanks to the history 1 it works even with complicated expressions like:
true && (false); echo $? | cat
For which approaches relying on $BASH_COMMAND or $# fail. For example simon's displays:
true | echo $? | cat
Thanks to Gilles and simon for providing inspiration.
I see what stoutie is trying to do, except it's a lot more work than needed. And doesn't cause all sorts of other potentially bad things that can occur as a result of redefining 'cd' and putting in all of that testing just to change directories. Bash has built in support for most of this.
You can put this in your .bashrc anywhere after you set your current PS1 prompt (this way it just prepends it)
# If this is an xterm set the titlebar to user#host:dir
case "$TERM" in
xterm*|rxvt*)
PS1="\[\e]0;\u#\h: \w\a\]$PS1"
;;
*)
;;
esac
The OP asked for bash, but others might be interested to learn that (as mentioned above) this is indeed a lot easier using the zsh shell. Example:
# Set window title to command just before running it.
preexec() { printf "\x1b]0;%s\x07" "$1"; }
# Set window title to current working directory after returning from a command.
precmd() { printf "\x1b]0;%s\x07" "$PWD" }
In preexec, $1 contains the command as typed (requires shell history to be enabled, which seems to be a fair assumption), $2 the expanded command (shell aliases etc.) and $3 the "very expanded" command (shell function bodies). (more)
I'm doing something like this, to show my pwd in the title, which could be modified to do whatever you want to do with the title:
function title { echo -en "\033]2;$1\007"; }
function cd { dir=$1; if [ -z "$dir" ]; then dir=~; fi; builtin cd "$dir" && title `pwd`; }
I just threw this in my ~/.bash_aliases.
Update
I ran into strange bugs with my original answer. I ended up picking apart the default Ubuntu PS1 and breaking it into parts only to realize one of the parts was the title:
# simple prompt
COLOR_YELLOW_BOLD="\[\033[1;33m\]"
COLOR_DEFAULT="\[\033[0m\]"
TITLE="\[\e]0;\u#\h:\w\a\]"
PROMPT="\w\n$ "
HUH="${debian_chroot:+($debian_chroot)}"
PS1="${COLOR_YELLOW_BOLD}${TITLE}${HUH}${PROMPT}${COLOR_DEFAULT}"
Without breaking into variables, it would look like this:
PS1="\[\033[1;33m\]\[\e]0;\u#\h:\w\a\]${debian_chroot:+($debian_chroot)}\w\n$ \[\033[0m\]"
I have tested three method, all is OK, use any one for your pleasure.
export PROMPT_COMMAND='echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"'
trap 'echo -ne "\033]2;$(history 1 | sed "s/^[ ]*[0-9]*[ ]*//g")\007"' DEBUG
trap 'echo -ne "\e]0;"; echo -n $BASH_COMMAND; echo -ne "\a"' DEBUG
please note if use $BASH_COMMAND, it don't recognize bash alias, and use PROMPT_COMMAND show finished command, but use trap show running command.
Based on the the need to auto position putty windows I have modified my /etc/bash.bashrc file on a Debian/Ubuntu system. I have posted the full contents for completeness but the relevant bit to starts on the # Display command ... comment line.
# System-wide .bashrc file for interactive bash(1) shells.
# To enable the settings / commands in this file for login shells as well,
# this file has to be sourced in /etc/profile.
# If not running interactively, don't do anything
[ -z "$PS1" ] && return
# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize
# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
debian_chroot=$(cat /etc/debian_chroot)
fi
# set a fancy prompt (non-color, overwrite the one in /etc/profile)
PS1='${debian_chroot:+($debian_chroot)}\u#\h:\w\$ '
# Display command run in title which allows us to distinguish Kitty/Putty
# windows and re-position easily using AutoSizer window utility. Based on a
# post here: http://mg.pov.lt/blog/bash-prompt.html
case "$TERM" in
xterm*|rxvt*)
# Show the currently running command in the terminal title:
# http://www.davidpashley.com/articles/xterm-titles-with-bash.html
show_command_in_title_bar()
{
case "$BASH_COMMAND" in
*\033]0*)
# The command is trying to set the title bar as well;
# this is most likely the execution of $PROMPT_COMMAND.
# In any case nested escapes confuse the terminal, so don't
# output them.
;;
*)
echo -ne "\033]0;${USER}#${HOSTNAME}: ${BASH_COMMAND}\007"
;;
esac
}
trap show_command_in_title_bar DEBUG
;;
*)
;;
esac
# Commented out, don't overwrite xterm -T "title" -n "icontitle" by default.
# If this is an xterm set the title to user#host:dir
#case "$TERM" in
#xterm*|rxvt*)
# PROMPT_COMMAND='echo -ne "\033]0;${USER}#${HOSTNAME}: ${PWD}\007"'
# ;;
#*)
# ;;
#esac
# enable bash completion in interactive shells
if ! shopt -oq posix; then
if [ -f /usr/share/bash-completion/bash_completion ]; then
. /usr/share/bash-completion/bash_completion
elif [ -f /etc/bash_completion ]; then
. /etc/bash_completion
fi
fi
# if the command-not-found package is installed, use it
if [ -x /usr/lib/command-not-found -o -x /usr/share/command-not-found/command-not-found ]; then
function command_not_found_handle {
# check because c-n-f could've been removed in the meantime
if [ -x /usr/lib/command-not-found ]; then
/usr/bin/python /usr/lib/command-not-found -- "$1"
return $?
elif [ -x /usr/share/command-not-found/command-not-found ]; then
/usr/bin/python /usr/share/command-not-found/command-not-found -- "$1"
return $?
else
printf "%s: command not found\n" "$1" >&2
return 127
fi
}
fi
You can set up bash such that it sends a certain escape sequence to the terminal every time it starts an external program. If you use the escape sequence that terminals use to update their titles, your problem should be solved.
I have used that before, so I know it is possible. but I cannot remember it off the top of my head and do not have time to research the details right now, though.
Some of the old methods were removed from gnome-terminal 3.14 due to these two bugs (724110 and 740188).
In Ubuntu 20.04
PS1=$PS1"\[\e]0;New_Terminal_Name\a\]"
\[ begin a sequence of non-printing characters
\e]0; is the char sequence for setting the terminal title. Bash identifies this sequence and set the tile with the following characters. Number 0 turns out to be the value to reference the title property.
New_Terminal_Name is the tile we gave
\a is the ASCII bell character, also in this case, it marks the end of the tile to read from Bash.
\] end a sequence of non-printing characters
We can create a function for future use
function set_title(){
if [ -z "$PS1_BACK" ]; # set backup if it is empty
then
PS1_BACK="$PS1"
fi
TITLE="\[\e]0;$*\a\]"
PS1="${PS1_BACK}${TITLE}"
}
Open the ~/.bashrc file in your home directory with a text editor and append the above function at the end of it. Save and close.
To use it immediately source it to the current terminal.
source ~/.bashrc
We can use it then like this
set_title <New terminal tab title>
My terminal window titler script
This dynamic backgrounded script show all running command with pid number and elapsed time in seconds, like if I run du -h | less, this will build title looking like:
204640 6 du -h | 204641 6 less
Then when no command (other than himself) are running, don't change the terminal title, so standard behaviours works normaly.
First run start backgroud task. Second run in same terminal ask for kill previous backgrounded task.
Save this into a file, set execute flag then run it without argument:
cat <<"EOF" >titleWin.sh
#!/bin/bash
## Ask for kill process if already started
mapfile -t pids < <(ps -C ${0##*/} ho pid)
for pid in ${pids[#]} ;do
if [[ $pid != $$ ]] && [ -d /proc/$pid ]; then
echo -n "STARTED: [$pid]: ${0##*/}. Kill them (Y/n)? "
read -rsn 1 act
case $act in
n|N ) echo No;;
* ) echo Yes;kill $pid ;;
esac
exit
fi
done
## Title win for xterm or screen (or tmux).
case $TERM in
xterm*|rxvt* ) titleFmt='\e];%s\a';;
screen* ) titleFmt='\ek%s\e\\';;
* ) echo "Unable to title window.";exit 1;;
esac
tty=$(tty)
## Date to epochseconds converter
exec {dateout}<> <(:)
exec {datein}> >(exec stdbuf -o0 date -f - +%s >&$dateout)
DPID=$!
trap "echo TRAP;kill $DPID" 1 2 3 6 9 15
# Main loop
while :;do
string=""
while read -r pid wday mon day time year cmd; do
if [[ $pid != $$ ]] && [[ $pid != $PPID ]] && [[ $pid != $BASHPID ]] &&
[[ $pid != $DPID ]] && [ "${cmd#*pid,lstart,cmd}" ] &&
[ -d /proc/$pid ] ;then
echo >&${datein} $wday $mon $day $time $year
read -ru $dateout date
string+="$pid $((EPOCHSECONDS-date)) $cmd | "
fi
done < <(exec ps --tty ${tty#*/dev/} ho pid,lstart,cmd)
[[ "$string" ]] && printf "$titleFmt" "${string% | }"
sleep .333
done &
EOF
chmod +x titleWin.sh
./titleWin.sh