I am trying to figure out a way to add data to an existing table, where it can identify a value (like name or ID#) and add in a new piece of data into that row for the individual.
See Pic 1: The person using this guide will click "yes" or "no" if they want to move the person forward. I want to record that yes/no in their database. (Note: each new candidate gets their HR Guide with their name on it. If you are listed on the Short list (see pic 2), you will get a HR Guide created for you. So the name of the tab is unpredictable, which is why things like vlookups or other formulas will not work.)
Here is the image of where I want the input to go. Based on the name matching in column C, I want it to input the Yes/No in Column I
I have no VBA code to share as I have no clue where to start. I have looked around trying to find a solution or something to work off of, but cannot find something that is close enough for me to figure it out (usually that works for me, but not this time...). So any help/direction you can provide would be VERY helpful! Thanks in advance.
Related
Could somebody please help me create a search feature in Excel, intended as a contact lookup? I'm reasonably comfortable in Excel up to 2016 but have no VBA knowledge so I hope this can be done without it. Using Excel 365 and it will be published to Sharepoint to specific users. I know it's poor practice on here to rely on sample data so I'll do my best to explain with a couple of screenshots.
Situation:
I have a raw data sheet containing 50,000 rows (CustomerName, ID, City, Country, EmailAddress etc). Our sales team need to look up contact details but only if they know the customer's name, or part thereof.
I need to hide the underlying data but a rudimentary system is acceptable, we just don't want to serve it up on a platter. The basic shove-it-under-the-mattress method by making it all white text; lock all cells; hide all rows and columns; password protect and hide the sheet is fine for now - no one will be determined enough to start picking that apart.
I've searched here and while there are similar results, nothing really fits perfectly. The most suitable so far was on extendoffice which doesn't quite suffice (will put link in attachment). It utilises SEARCH, RANK, ROW and VLOOKUP functions, the interaction of which I don't entirely understand, but it works.
Interim steps for the lookup function on sheet "Search"
Issues with current concept:
There's no discernable order to the results. The RANK and ROW functions seem to randomly assign ranks, and when you get 50+ results with no way of sorting it will be frustrating.
Whenever one person queries it undoes the last person's search. Expected, but not nice
Partial string search with results unsorted
Additionally:
This doc will be on Sharepoint, directly accessible by ~20 people. Ideally, when one person searches it won't change on someone else's screen
Results should appear alphabetically by customer name
Nice to haves:
Add another criteria to search by. Eg City or Account Manager - doesn't have to stack
Select and copy the contents of a cell (eg email address), but not allow editing of the value or formula. If not possible I'll leave the cells completely locked as the trade-off of accidentally overriding a formula is not worth it.
Any help would be super appreciated
I am having a little difficulty uploading information into an Excel from PowerApps.
I created an app with 3 different data sources, 2 of them are SharePoint Lists where the information is uploading without any trouble. The 3rd one, an Excel table, is… not.
I am using the Excel in order to obtain a random name from "Colum1", the logic I found for it is:
Set(varRandom, Last( FirstN ( Filter(TableName, IsBlank(Column2)),1+RoundDown(Rand()*CountRows(TableName),0))).'Column1')
This works, giving a random name although I haven't figured how to take the user itself out of the equation. (Meaning, if I am using the app, I don't want to get my own name randomly selected)
From how it works, I want that when you touch a different button it submits the information that that random name has already been selected by someone, therefore, it can't be picked again. I tried "SubmitForm(FormName)" at first, but I believe I am missing information to tell Excel what to take from the data I am feeding it with and where to send it.
This means just uploading any data into Column3, which starts all blank so everyone can be randomly picked.
I am not a coder, so there's 89% chances I am just writing the functions wrong, but everything else on the app works fine: random selection, navigation between several screens, and the information being submitted to the 2 SharePoint lists.
In short: I need to
Remove the user using the app from the random selection
Uploading any data into the third column so that one name can't be picked twice.
Can anyone assist?
To remove your name from being selected, first you need to let the app know what the name of the user is. You can ask the name of the user and store it in a variable.
Then, if I understand correctly, you write something down on the Column3 when a name is picked to let you know the name was already used and can't be used again. After you know the name of the user, you can write something down right away on the 'Column3' in the row corresponding to the user's name so it can't be picked anymore.
To help you with the Excel we'll need to know where you save your excel file.
Best regards
I'm wondering if it is at all possible to use Data Validation in Microsoft Excel (2007) without creating a Drop Down list.
I'm currently creating a seating plan for work. I want the user to have the ability to freely type in the name in a cell (Desk). There are 7 teams of approximately 10-12 people. so finding a name in a long list would take up too much time. however the name typed in the cell has to be be an exact match from a list stored else where in the spreadsheet. The reason for this is i use a formula to show if everyone has been seated or not.
if a name is typed in and its not an exact i would like for an error message to pop up.
Any ideas if this is even possible?
im open to VBA. but a complete noob when it comes to VBA.
Thanks in advance.
Tom
To get DV without the drop-down, use the Custom > Formula option. Here is an example:
Only the set defined by the formula will be accepted and no drop-down will appear when the cell is clicked.
This project keeps throwing new and exciting things that I am having a good deal of trouble with.
I am hoping that there is an easy solution but I am starting to suspect it may be a macro problem.
What I have is...a master list of products, 10,000 of them. It is now end of season and we are moving a range of products to a discontinued section.
So what I need to know is how can I delete all the SKU's I need to...and then as an added bonus feature...add the NEW SKU's for this season into the master list.
What I am hoping to do is create something that when we have to do this again in six months...we dont have to enter the data individually and just add a discontinued list...and a new list and it will auto update the main list.
I will have to add SKUS and the data they contain and my only knowledge of this is using Vlookup.
Thanks.
There are a lot of ways to tackle this, but you haven't given enough info to get a specific answer.
For example, if you have that list of discontinued product numbers somewhere, you could easily run a vlookup formula against that data source to the master data source. Then, just sort out the stuff you want and delete it or move it or whatever.
It also begs the question of why you have a 'discontinued' section. I loathe 'sections' in a database. If it's a real DB table, there shouldn't be any breaks anywhere....you'd deal with 'discontinued' versus 'active' with an additional field (column) and mark things as such there.
If the table and the data is organized well, you can easily do these tasks you are talkign about.
I have a form. When I open the form the two fields called office and group should be picked up from another database named something like staff.nsf. The data is picked up based on the applicant name as key. I have included my name in staff database. But the form is not picking up the two fields from the staff database.
The field formula goes like this,
server := #Name([CN]; #Subset(#DbName; 1));
temp:= #If(Applicant != ""; #DbLookup( "" : "NoCache"; server:"Mast\\Staff.nsf";
"ByApplicant";Applicant; 2); "");
#If(#IsError(temp);"";temp)
Is it a system bug? Can anybody help please.
Regards,
Priya
Lotus Notes is more than 20 years old, and extremely well-tested. It is very unlikely that you have found a "system bug". There are any number of possible problems here, and you need to carefully rule them out until you find the actual problem.
The first thing you should do is take the #IsError out of the formula (temporarily). By having it there, you are suppressing a potentially useful error message. Ok... admittedly the error messages are usually not that helpful, but sometimes they are. If you don't want to take it out of your formula, just add another computed-for-display field with just the #DbLoookup -- and follow Ken's advice about hard-coding everything.
Then review all of the following:
Is "mast\staff.nsf" the correct path for the database?
Do you have access to the database?
Is "ByApplicant" the correct name for the view? (Spelling errors happen!)
Do you have access to the view?
Do you have access to the documents in the view?
As Ken mentioned, is the first column in the ByApplicant view sorted?
Is the name value you are passing for Applicant in the exact same format that appears in the view column? (I.e, if it appears in abbreviated form in the view column, make sure that you are passing it to #DbLookup in abbreviated format.)
Does the second column of the view contain the value that you are trying to read? (Check out the rules for counting columns in the documentation for #DbLookup.)
A few thoughts:
The ByApplicant view needs to have its first column sorted alphabetically and that column should be the list of applicant names you are matching on
Try hard coding the value for applicant in the #DBLookup to see if it works, and to rule it out as the problem.
This does not work on the web, only on the client (I believe)