I was going through the new kernel code and it looks like the cmd field in the request structure (defined in linux/blkdev.h) doesn't exist anymore. Here is what it looked it in earlier versions.
I am using that field to send a specific request structure(struct nvme_command to be more specific) down to the block device. How do I update my code to use the latest version of the blkdev.h? More specifically, how do I send down my nvme_command structure to the block device now that there is no cmd field?
Related
I need to repair an XML file in TypeScript and I cannot find any info on it, since everyone who posts something like this has different needs. I'd like to be pointed in the right direction here.
I have an XML request as shown below. It is autogenerated by node-soap when given JSON. Using the WSDL, node-soap attempts to fill in the namespace prefixes for each property. The problem is, it gets them wrong a lot.
In this example below, q106 should be replaced with hep3.
<soap:Envelope q15="some-good-url" q106="some-good-url-1" q98-"some-good-url-2>
...
<q98:SalesOrderAuditInfo>
<q15:ConfirmedBy xsi:nil="true"></q15:ConfirmedBy>
<q15:ConfirmedDate>0001-01-01T00:00:00</q15:ConfirmedDate>
<q15:CreatedBy>
<q106:ID>103</q106:ID>
<q106:Value>System, System</q106:Value>
</q15:CreatedBy>
<q15:CreatedDate>2022-10-26T00:43:13.413</q15:CreatedDate>
<q15:SalesOrderType>Standard</q15:SalesOrderType>
</q98:SalesOrderAuditInfo>
I know which namespace prefixes are bad because I have a sample request that was supplied to me. It's just XML. It looks like this:
<soap:Envelope hep="some-good-url" hep1="some-good-url-1" hep2-"some-good-url-2 hep3="some-good-url-3">
...
<hep2:SalesOrderAuditInfo>
<hep:ConfirmedBy xsi:nil="true"></hep:ConfirmedBy>
<hep:ConfirmedBy:ConfirmedDate>0</hep:ConfirmedByConfirmedDate>
<hep:CreatedBy>
<hep3:ID>103</hep3:ID>
<hep3:Value>System, System</hep3:Value>
</hep:CreatedBy>
<hep:CreatedDate>0</hep:CreatedDate>
<hep:SalesOrderType>Standard</hep:SalesOrderType>
</hep2:SalesOrderAuditInfo>
Here is the part that really matters. The Sample Request is the entire possible request body. The supplied request (with incorrect namespaces) is a subset of the sample request. I need to loop through each of the elements in the supplied request, and check to make sure the URL of that element matches the URL of the respective element in the sample request.
So in this example, loop through each element of supplied request. Start with SalesOrderAuditInfo. It's namespace URL is some-good-url-2. If we check the Sample Request, we can see that SalesOrderAuditInfo also corresponds to some-good-url-2.
Continue until we hit the ID tag. This has a namespace set to some-good-url-1. If we check the Same ID (inside of CreatedBy, inside of SalesOrderAuditInfo), we can see the namespace should actually be set to some-good-url-3. So we replace q106 with hep3.
I also need to take all of the namespaces defined in the Sample Request Envelope and move them into the supplied request envelope so that this new hep3 will be defined.
At this point, I need to edit the namespace prefix. In this example, q106:ID would be replaced be the string hep3:ID. Same with all of the closing tags.
Which library can I use to accomplish this in XML? Is anyone familiar with node-soap screwing these namespaces up and know of any fix?
I am using node-soap v0.43
Following these guides https://developers.google.com/apps-script/guides/rest/quickstart/target-script and https://developers.google.com/apps-script/guides/rest/quickstart/nodejs, I am trying to use the Execution API in node to return some data that are in a Google Spreadsheet.
I have set the script ID to be the Project Key of the Apps Script file. I have also verified that running the function in the Script Editor works successfully.
However, when running the script locally with node, I get this error:
The API returned an error: Error: ScriptError
I have also made sure the script is associated with the project that I use to auth with Google APIs as well.
Does anyone have any suggestion on what I can do to debug/ fix this issue? The error is so generic that I am not sure where to look.
UPDATE: I've included a copy of the code in this JSBin (the year function is the entry point)
https://jsbin.com/zanefitasi/edit?js
UPDATE 2: The error seems to be caused by the inclusion of this line
var spreadsheet = SpreadsheetApp.open(DriveApp.getFileById(docID));
It seems that I didn't request the right scopes. The nodejs example include 'https://www.googleapis.com/auth/drive', but I also needed to include 'https://www.googleapis.com/auth/spreadsheets' in the SCOPES array. It seems like the error message ScriptError is not very informative here.
In order to find what scopes you'd need, to go the Script Editor > File > Project Properties > Scopes. Remember to delete the old credentials ~/.credentials/old-credential.json so that the script will request a new one.
EDIT: With the update in information I took a closer look and saw you are returning a non-basic type. Specifically you are returning a Sheet Object.
The basic types in Apps Script are similar to the basic types in
JavaScript: strings, arrays, objects, numbers and booleans. The
Execution API can only take and return values corresponding to these
basic types -- more complex Apps Script objects (like a Document or
Sheet) cannot be passed by the API.
https://developers.google.com/apps-script/guides/rest/api
In your Account "Class"
this.report = spreadsheet.getSheetByName(data.reportSheet);
old answer:
'data.business_exp' will be null in this context. You need to load the data from somewhere. Every time a script is called a new instance of the script is created. At the end of execution chain it will be destroyed. Any data stored as global objects will be lost. You need to save that data to a permanent location such as the script/user properties, and reloaded on each script execution.
https://developers.google.com/apps-script/reference/properties/
We are using #SNMP to created an SNMP V3 agent.
I would like to know if it is normal that the SecureSnmpContext class does not use the given ContextName when using GeneratedResponse for example ?
The ContextName is available into the request object ?
In the code, OctetString.Empty is used instead of ContextName.
new Scope(Group.EngineId,
OctetString.Empty,
new ResponsePdu(
Request.RequestId(),
ErrorCode.NoError,
0,
variables)),
Is the ContextName not required in the response maybe ?
Thanks
The design of the snmpd sample follows Net-SNMP agent, which does not use the context name much.
If you have requirements to set that field, feel free to modify the code base to suit your needs please.
Remember that you also need to modify the authentication part to verify context name of the incoming messages if you do set a context name.
I am trying to do the following in SOAPUI:
Read a response and extract a node from it
Insert the node into another request
Generate some xml in a Groovy script and store in a TestCase property
Insert the generated xml from the property as a child node to the node inserted in Step 2.
For 1 and 2: The structure of the response is something like
<A><B>bb</B><C>cc</C><D>dd</D></A>
I extract it via a Property Transfer step using //A to identify the beginning of the node, and passing the node with its children to the request in the next test step. Until this, the node in the request has no content. This works.
For 3 I generate something like
<E>ee</E>
The goal after step 4 is a request structure looking like this:
<A><E>ee</E><B>bb</B><C>cc</C><D>dd</D></A>
A solution using
${#TestCase#new_xml}
to insert the node does not work because there is no way to place the property where the E node should be (as far as I know).
I tried inserting the E node via another Property Transfer test step - the value of the property gets inserted in the request as child to the A node (same way the A node was copied from the response to the next request in Step 2). The result is this:
<A><![CDATA[<E>ee</E>]]<<B>bb</B><C>cc</C><D>dd</D></A>
I would like to know:
How to insert the E node as a child node to the A node while avoiding CDATA (or removing the CDATA subsequently).
Why the xml is passed without CDATA in Step 2 which also uses the SOAPUI Property Transfer Step, but not in Step 4.
Any tips appreciated!
For 1 & 2, you can use just a simple property expansion.
Let say your Response looks like:
<AAA>
<BBB/>
<CCC/>
<BBB/>
<BBB/>
<DDD>
<BBB/>
</DDD>
<CCC/>
</AAA>
And let say you want to transfer the entire node DDD, including the children. In your next request you would use ${<TestStep_name>#Response//*:DDD}. Note the *: means "any namespace", since in a real SOAP Response you will probably have some kind of namespace.
For 3:
// Generate some xml in a Groovy script
def xml = '<AAA><BBB/><CCC/><BBB/><BBB/><DDD><BBB/></DDD><CCC/></AAA>'
// store in a TestCase property
testRunner.testCase.setPropertyValue('my_property', xml)
If you want to get more fancy, you could use one of the many Java XML libraries, some of which are packaged with SoapUI. Here is one possibility.
For 4, you would again use property expansion: ${#TestCase#my_property}
I need to clear/reset the external ID on a record in NetSuite, but nothing I do is working.
Some of the InventoryItem records are incorrectly mapped to records in another system. I have an application that can sync up the two systems, but I need to clear NetSuite's external IDs first.
Responses don't really need to be SOAP-specific. If you know how to do it with some specific NetSuite/SuiteTalk client, that might point me in the right direction.
What I've Tried
First up, I tried using the nullFieldList... but maybe it doesn't work because externalId is an attribute, not an element?
<messages:update>
<messages:record internalId="7777" xsi:type="accounting:InventoryItem">
<core:nullFieldList xsi:type="core:NullField">
<core:name>externalId</core:name>
</core:nullFieldList>
</messages:record>
</messages:update>
The external ID is just a string, so I tried just setting it to blank. Didn't work either.
<messages:update>
<messages:record internalId="7777" xsi:type="accounting:InventoryItem">
<accounting:externalId></accounting:externalId>
</messages:record>
</messages:update>
I even tried setting the external ID to 0, but I get back a "not unique identifier" error
<messages:update>
<messages:record internalId="7777" xsi:type="accounting:InventoryItem">
<accounting:externalId>0</accounting:externalId>
</messages:record>
</messages:update>
Other Info
I'm using NetSuite's SOAP API v.2013_1
When I say "it doesn't work", I mean: after I do the update, I get a success response similar to the following:
<readResponse>
<platformCore:status isSuccess="true" xmlns:platformCore="urn:core_2013_1.platform.webservices.netsuite.com"/>
<record internalId="7777" externalId="42" xsi:type="listAcct:InventoryItem" xmlns:listAcct="urn:accounting_2013_1.lists.webservices.netsuite.com">
<!-- snip -->
</record>
</readResponse>
If you are using scripts in netsuite you can run a scheduled script to clear records in NS by loading each record and setting the externalid to '' using the following simple code:
var rec= nlapiLoadRecord(type,id);
rec.setFieldValue('externalid','');
nlapiSubmitRecord(rec);
This seemed to work for me in my enviornment which was on 2015.2.
Unfortunately my understanding is that once you set an externalid you cannot clear it, you can set it to another value, but not back to null. I have experienced this both using SuiteScript as well as a Boomi process that uses the 2014.1 endpoint. This may have changed in the recent releases, as I have not tried it recently with SuiteScript nor with a newer endpoint.
You can eliminate the externalId on a record once it's been set. Here's an example using the NetSuite gem:
ns_customer = NetSuite::Records::Customer.get external_id: 'ext_id'
ns_customer.external_id = ''
ns_customer.update
Here's the corresponding XML for update:
<env:Body>
<platformMsgs:update>
<platformMsgs:record xsi:type="listRel:Customer" platformMsgs:internalId="199113" platformMsgs:externalId=""/>
</platformMsgs:update>
</env:Body>
I have had to attempt this before as well. I know the pains you describe. I ended up putting a "-" in front of my external ID to unlink it between my systems. You can do this in SOAP or even as a simple one time csv upload. As it was one time, I did csv.