I came home with a work project that I planned on fiddling with on my personal computer, I installed everything, using the exact same environment (Node v0.11.12), etc. Start the project, then I'm greeted with messages complaining that the config loader module cannot locate a file (that exists and is at the path exposed by the error).
Looking closer at the error, I realize that the problem is path.join(). Where
path.join('./foo/bar');
// 'foo/bar'
Which is not good. Why does path.join remove the leading period?
** Note **
The above is simply an example. The program make use of the function like
var configFile = require(path.join(modulePath, 'conf', file));
for example, where modulePath is relative to the current working directory (i.e. ./app/module/)
This is correct behavior, and is documented in the Path.join documentation:
Join all arguments together and normalize the resulting path.
It is correct because foo/bar is the normalized (canoncial) form of ./foo/bar, just as it is the normalized form of ./foo/././bar/. or foo/baz/../bar.
(Differences between require('./foo/bar') and require('foo/bar'), and any resulting problems of such, should be specifically addressed in a different question without path.join.)
I am wondering how I can programmatically add \ in front of spaces that appear in file paths. I am using fs.readdir to get the contents of directories and if I don't escape the spaces out of the path then I get an ENOENT error because unescaped paths are invalid in UNIX. I'd like get below result :
/path/with\ spaces/in/them/
However, I am running into a problem with a REGEX in the NODE REPL. When I do :
var path = '/path/with spaces/in/them/';
var escapedPath = path.replace(/(\s)/, "\\ ");
I get as result :
'/path/with\\ spaces/in/them/'
When I try to run this same code inside of the Chrome console I get :
"/path/with\ spaces/in/them/"
Which is the desired effect.
I am not sure if I am missing something or if this is a bug. I am confused because Node runs on the same Javascript engine as Chrome so I would think that these expressions would be interpreted the same.
Please let me know if anyone knows a way to do get around this. Maybe I am missing something. I just need to be able to escape the paths before passing them into fs.readdir so that I can avoid these errors.
Thanks!
try either this
var path = "'file:///Users/kevin/folder with space'";
or this
var path = "\"file:///Users/kevin/folder with space\"";
fs.readdir doesn't require you to escape paths. I was able to recursively pass fs.readdir output directories back into fs.readdir without any issues.
The issue above with the REGEX was only occuring in the Node REPL. Once I tested the above code inside of a file I was able to run it through Node and get the same output I saw in the Chrome console.
I ended up finding a bug in my code that was a little hard to track down. I first thought that it came from not escaping the path I was sending into fs.readdir but it was actually an issue where I was fs.stat the output of fs.readdir and then checking if the output was a file or a directory and treating it accordingly.
It turns out that a few results from the stat were neither Files or Directories and my function didn't have any way to deal with this so it just returned. Since I had no handlers for this my node program just stopped abrubtly. All I had to do was add an extra else condition to catch the non-file/directories cases (which I don't care about anyway).
Now its working fine!
I'm kinda new to linux so you'll have to pardon my question if it's really basic. I have a code snippet that includes the following line:
require("axf.sf")
I am trying to find the file that contains this code.
I've tried the following commands on my server:
find / -name axf.sf
find / -name axf.sf*
But I can't locate it. I know the code exists because the program works.
any suggestions would be appreciated.
Lua, like many languages, has the concept of a "path" to search for required modules.
It can be configured by several means, but it's usually something like
./?.lua;/usr/local/share/lua/5.1/?.lua;/usr/local/share/lua/5.1/?/init.lua;/usr/local/lib/lua/5.1/?.lua;/usr/local/lib/lua/5.1/?/init.lua;/usr/share/lua/5.1/?.lua;/usr/share/lua/5.1/?/init.lua
(you can verify if your's is different by checking typing =package.path at a Lua prompt)
The default package searcher first takes the package name ("axf.sf" in your example) and replaces each dot with the OS's directory separator. ("axf/sf" in your example, since you're on Linux). Then it replaces the ? on each pattern with the transformed package name, and uses the first one that exists on your system.
so, it would search for
./axf/sf.lua
/usr/local/share/lua/5.1/axf/sf.lua
/usr/local/share/lua/5.1/axf/sf/init.lua
/usr/local/lib/lua/5.1/axf/sf.lua
/usr/local/lib/lua/5.1/axf/sf/init.lua
/usr/share/lua/5.1/axf/sf.lua
/usr/share/lua/5.1/axf/sf/init.lua
I am working on an application which uses Boost.Python to embed the Python interpreter. This is used to run user-generated "scripts" which interact with the main program.
Unfortunately, one user is reporting runtime error R6034 when he tries to run a script. The main program starts up fine, but I think the problem may be occurring when python27.dll is loaded.
I am using Visual Studio 2005, Python 2.7, and Boost.Python 1.46.1. The problem occurs only on one user's machine. I've dealt with manifest issues before, and managed to resolve them, but in this case I'm at a bit of a loss.
Has anyone else run into a similar problem? Were you able to solve it? How?
The problem was caused by third-party software that had added itself to the path and installed msvcr90.dll in its program folder. In this case, the problem was caused by Intel's iCLS Client.
Here's how to find the problem in similar situations:
Download Process Explorer here.
Start your application and reproduce runtime error R6034.
Start Process Explorer. In the "View" menu go to "Lower Pane View" and choose "DLLs".
In the top pane, locate your application and click on it. The bottom pane should show a list of DLLS loaded for your application.
Locate "msvcr??.dll" in the list. There should be several. Look for the one that is not in the "winsxs" folder, and make a note of it.
Now, check the path just before your application runs. If it includes the folder you noted in step 5, you've probably found the culprit.
How to fix the problem? You'll have to remove the offending entry from the path before running your program. In my case, I don't need anything else in the path, so I wrote a simple batch file that looks like this:
path=
myprogram.exe
That's it. The batch file simply clears the path before my program runs, so that the conflicting runtime DLL is not found.
This post elaborates on #Micheal Cooper and #frmdstryr and gives a better alternative than my earlier answer.
You can put the following in front of a python script to purge the problematic entries.
import os, re
path = os.environ['PATH'].split(';')
def is_problem(folder):
try:
for item in os.listdir(folder):
if re.match(r'msvcr\d\d\.dll', item):
return True
except:
pass
return False
path = [folder for folder in path if not is_problem(folder)]
os.environ['PATH'] = ';'.join(path)
For the vim with YouCompleteMe case, you can put the following at the top of your vimrc:
python << EOF
import os, re
path = os.environ['PATH'].split(';')
def is_problem(folder):
try:
for item in os.listdir(folder):
if re.match(r'msvcr\d\d\.dll', item):
return True
except:
pass
return False
path = [folder for folder in path if not is_problem(folder)]
os.environ['PATH'] = ';'.join(path)
EOF
A more general solution is:
import os
os.environ['path'] = ";".join(
[path for path in os.environ['path'].split(";")
if "msvcr90.dll" not in map((lambda x:x.lower()), os.listdir(path))])
(I had the same problem with VanDyke SecureCRT)
(This might be better as a comment than a full answer, but my dusty SO acct. doesn't yet have enough rep for that.)
Like the OP I was also using an embedded Python 2.7 and some other native assemblies.
Complicating this nicely was the fact that my application was a med-large .Net solution running on top of 64-Bit IIS Express (VS2013).
I tried Dependency Walker (great program, but too out of date to help with this), and Process Monitor (ProcMon -- which probably did find some hints, but even though I was using filters the problems were buried in thousands of unrelated operations, better filters may have helped).
However, MANY THANKS to Michael Cooper! Your steps and Process Explorer (procexp) got me quickly to a solution that had been dodging me all day.
I can add a couple of notes to Michael's excellent post.
I ignored (i.e. left unchanged) not just the \WinSxS\... folder but also the \System32\... folder.
Ultimately I found msvcr90.dll being pulled in from:
C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64
Going through my Path I found the above and another, similar directory which seemed to contain 32-bit versions. I removed both of these, restarted and... STILL had the problem.
So, I followed Michael's steps once more, and, discovered another msvcr90.dll was now being loaded from:
C:\Program Files\Intel\iCLS Client\
Going through my Path again, I found the above and an (x86) version of this directory as well. So, I removed both of those, applied the changes, restarted VS2013 and...
No more R6034 Error!
I can't help but feel frustrated with Intel for doing this. I had actually found elsewhere online a tip about removing iCLS Client from the Path. I tried that, but the symptom was the same, so, I thought that wasn't the problem. Sadly iCLS Client and OpenCL SDK were tag-teaming my iisexpress. If I was lucky enough to remove either one, the R6034 error remained. I had to excise both of them in order to cure the problem.
Thanks again to Michael Cooper and everyone else for your help!
Using Michael's answer above, I was able to resolve this without a bat file by adding:
import os
# Remove CLS Client from system path
if os.environ['PATH'].find("iCLS Client")>=0:
os.environ['PATH'] = "".join([it for it in os.environ['PATH'].split(";") if not it.find("iCLS Client")>0])
to the main python file of the application. It just makes sure system path didn't include the paths that were causing the issue before the libraries that loaded the dll's were imported.
Thanks!
This post elaborates on #Micheal Cooper and #frmdstryr.
Once you identified the problematic PATH entries, you can put the following in front of a
python script, assuming here that iCLS Client and CMake are problematic.
import os
for forbidden_substring in ['iCLS Client', 'CMake']:
os.environ['PATH'] = ';'.join([item for item in os.environ['PATH'].split(';')
if not item.lower().find(forbidden_substring.lower()) >= 0])
Concerning the vim with YouCompleteMe case, you can put the following at the top of your vimrc:
python << EOF
import os
for forbidden_substring in ['iCLS Client', 'CMake']:
os.environ['PATH'] = ';'.join([item for item in os.environ['PATH'].split(';')
if not item.lower().find(forbidden_substring.lower()) >= 0])
EOF
If none of these solutions is applicable for you, you can try to remove the problem causing
entries from you PATH manually, but you want to make sure you don't break anything else on your
system that depends on these PATH entries. So, for instance, for CMake you could try to remove
its PATH entry, and only put a symlink (or the like) pointing to the cmake.exe binary into some
other directory that is in your PATH, to make sure cmake is still runnable from anywhere.
Thanks for the solution. I just little modified this sample code as the path variable in my system contains the string "ICLS CLIENT" instead of "iCLS Client"
import os
# print os.environ['PATH']
# Remove CLS Client from system path
if os.environ['PATH'].find("iCLS Client") >= 0 or os.environ['PATH'].find("ICLS CLIENT") >= 0:
os.environ['PATH'] = "".join([it for it in os.environ['PATH'].split(";") if not (it.find("iCLS Client")>0 or it.find("ICLS CLIENT")>0)])
I also had the same problem with embedding Python27.dll from a C-program using the Universal-CRT.
A <PYTHON_ROOT>\msvcr90.dll was the offender. And <PYTHON_ROOT> is off-course in my PATH. AFAICS the only users of msvcr90.dll are the PyWin32 modules
<PYTHON_ROOT>\lib\site-packages\win32\win32*.pyd.
The fix was just move <PYTHON_ROOT>\msvcr90.dll to that directory.
PS. PyWin32 still has this as an issue 7 years later!
In my case the rebuilding of linked libraries and the main project with similar "Runtime execution libraries" project setting helped. Hope that will be usefull for anybody.
In my case, I realised the problem was coming when, after compiling the app into an exe file, I would rename that file. So leaving the original name of the exe file doesn't show the error.
The discussion on this page involves doing things way far advanced above me. (I don't code.) Nevertheless, I ran Process Explorer as the recommended diagnostic. I found that another program uses and needs msvcr90.dll in it's program folder. Not understanding anything else being discussed here, as a wild guess I temporarily moved the dll to a neighboring program folder.
Problem solved. End of Runtime error message.
(I moved the dll back when I was finished with the program generating the error message.)
Thank you all for your help and ideas.
Check any library having user specified path by Process Explorer. It is not necessary must be msvcr??.dll
I solved same problem except I run Python 3. Present solutions not helped because they not indicate unusual paths of msvcr90.dll. I debug code step by step inside till error dialog appears after rows (called when my code was importing PyTables module):
import ctypes
ctypes.cdll.LoadLibrary('libbz2.dll')
Then Process Explorer helps to find path to old libbz2.dll caused the problem (steps 3, 4 of #Micheal Cooper algorithm)
Adding this answer for who is still looking for a solution. ESRI released a patch for this error. Just download the patch from their website (no login required), install it and it will solve the problem. I downloaded the patch for 10.4.1 but there are maybe patches for other versions also.
I came across echofunc.vim today (from a link in SO). Since I'm rubbish at remembering the order of function parameters, it looked like a very useful tool for me.
But the documentation is a bit lean on installation! And I've not been able to find any supplementary resources on the internet.
I'm trying to get it running on a RHEL box. I've copied the script into ~/.vim/plugin/echofunc.vim however no prompt when I type in a function name followed by '('. I've tried adding
let g:EchoFuncLangsUsed = ["php","java","cpp"]
to my .vimrc - still no prompting.
I'm guessing it needs to read from a dictionary somewhere - although there is a file in /usr/share/vim/vim70/ftplugin/php.vim, this is the RH default and does not include an explicit function list.
I'm not too bothered about getting hints on the functions/methods I've defined - just trying to get hints for the built-in functions. I can see there is a dictionary file available here which appears to provide the resources required for echofunc.vim, I can't see how I set this up.
TIA,
It expects a tags file, the last line of the description describes exactly how to generate it:
ctags -R --fields=+lS .
It works here with PHP but not with JS. Your mileage may vary.
I didn't know about this plugin, thanks for the info.
You should try phpcomplete.vim, it shows a prototype of the current function in a scratchpad. It is PHP only, though.