I am currently using the following subtotal SUBTOTAL(9,b:b) to cat a total on my filtered data.
Column A contains a year of either 16,17,18 or 19.
I would like to only count the subtotal if column A contains 16 so
=if(a:a = 16, SUBTOTAL(9,b:b) or something simular
We can "fake" the SUBTOTAL() function. Say we have data like:
and we want to filter the data and only add values in column B that correspond to 16 in column A. In C2 enter:
=SUBTOTAL(3,$B2:$B2)
and copy downward. Then filter column B for positive only:
The cool thing about column C is that it is 1 if the row is visible and 0 if the row is hidden. Therefore:
=SUMPRODUCT((B2:B20)*(C2:C20))
will yield the same result as =subtotal(9,b:b) and:
=SUMPRODUCT((A2:A20=16)*(B2:B20)*(C2:C20))
will apply the column A restriction.
Related
I have simple problem, but I've not be able to get an answer from searching. I require a column to calculate the number of the nth occurrence of a value. It's best explained in this picture
I require a method to calculate column B.
I'd be very grateful for any help.
Are you looking to merely provide a count of the distinct entries of column A in column B? Or merely add a formula to come up with the table in your link?
If the latter, then the formula to write in cell B2 is:
=COUNTIF(A$2:A2,A2)
then copy/paste it down column B. Note - if your data is both a Date and Time, but the cell is formatted to only display a date, you may not get the results you want. You'd need to interject a new column with a "floor" calculation to round the date/time value to a date (Excel date times are decimal, with integer part dictating the date, and remaining 0.0 -> 1.0 dictating the time of day)
If you just want to derive a table of the counts of distinct entries in column A, then a pivot table will do this for you - simple add a pivot table to cover the data in column A, then select column A into the rows category, and then also drag it into the values category, ensuring the field is set to "Count of". You should then have a table with the distinct entries in your data set in one column, and the count of their occurrences in the other column.
You can use the COUNTIF worksheet function, with a relative address.
Eg. In cell B2, enter this formula:
=COUNTIF(A$2:A2,A2)
And then fill-down.
Use the following formula to generate the required series:
=COUNTIF($A$1:A1,A1) and strech(copy) it in all the cells
This will generate result like this:
A 1 COUNTIF($A$1:A1,A1)
A 2 COUNTIF($A$1:A2,A2)
C 1 COUNTIF($A$1:A3,A3)
C 2 COUNTIF($A$1:A4,A4)
B 1 COUNTIF($A$1:A5,A5)
B 2 COUNTIF($A$1:A6,A6)
A 3 COUNTIF($A$1:A7,A7)
C 3 COUNTIF($A$1:A8,A8)
D 1 COUNTIF($A$1:A9,A9)
D 2 COUNTIF($A$1:A10,A10)
D 3 COUNTIF($A$1:A11,A11)
D 4 COUNTIF($A$1:A12,A12)
Ok I have 2 excel columns
1st column A "Workstream", is a data list with three numbers as a dropdown. 1,2,3
2nd column B "ID", would like to auto-populate based on the selection made from the left adjacent cell + perform a lookup to get the MAX number in the current column and ADD by 1.
For Example:
Workstream
ID
1
W1-001
1
W1-002
1
W1-003
1
W1-004
2
W1-001
1
W1-005
2
W1-002
So when a user selects from the drop-down in column A then Column B auto-populates with something like this
="W"&A:1&"-"
However, in order to complete the value, it needs to do the following:
="W"&A:1&"-" Search for the Max Record in Column B that starts with 1 or whatever value was entered into Column A, then include the next number based on the MAX value selected in Column A
So in the above example, let's say I Enter "2" in column A, then the value that auto-populates in column B would be
| 2 | W2-003
or if I selected 1 from column A given where we left off then the value that would auto-populate in column B would be:
| 1 | W1-006
If I am understanding correctly and you want the format to be "W" followed by number of the workstream (as inferred from the text of your question) try:
="W"&A2&"-"&TEXT(COUNTIF(A$2:A2, B2), "000")
If instead you want the output exactly as shown in the picture you provided, it's even easier:
="W1-"&TEXT(COUNTIF(A$2:A2, B2), "000")
EDIT: You might consider pre-dragging the formula to all the rows that you think have the possibility of being impacted so that you don't have to drag the formula each time you add a row. In that case, try:
=IF(A2="","", "W"&A2&"-"&TEXT(COUNTIF(A$2:A2, B2), "000"))
I want to sum a row like
A B C D E
2 4 3 5 5
I want the formula to sum from A1 to some column number like It can be up to column 4 (D1) or up to column 5 (E1). I can retrieve column number but how to add up to that column number is what I am asking for.
Start of sum is fixed A1 but end is dynamic (not fixed)
Any solution will be highly appreciated
Say we want to sum up part of the first row.
Place the first column number in A2 and the last column number in A3. Then:
=SUM(INDEX(1:1,A2):INDEX(1:1,A3))
In your posted example, you would put 1 in A2.
It's probably easiest to sum up the entire row =SUM(2:2) (to sum the values in row 2) or if you have some other data at the beginning (or you want the sum to show up at the beginning) you can do something like =SUM(B2:XFD2)
I got that last column name here: https://www.quora.com/What-is-the-last-column-name-in-an-Excel-file
and checked it was the same as newer versions here: https://support.office.com/en-us/article/excel-specifications-and-limits-1672b34d-7043-467e-8e27-269d656771c3#ID0EBABAAA=Newer_versions
Column A Has Text & Columns B, C & D contain numbers.
For Ex.)
A... …B C D
John 4 6 2
Dave 4 6 4
Mike 4 5 1
Bill 2 5 9
I would like a cell to return the name in column A that has the Largest Number in Column B. And if there are similar numbers, go to the next column and determine which is highest, and if that is tied go to the next column and so on.
Any help would be appreciated.
We can de-conflict ties.In E1 enter:
=B1 + C1/(10*MAX(C:C))+D1/(100*MAX(D:D))
and copy down. Then in another cell enter:
=INDEX(A:A,MATCH(MAX(E:E),E:E,0))
EDIT#1
This is only good for 3 columns of numbers, but it is very easy to add additional de-confliction terms if necessary:
=B1 + C1/(10*MAX(C:C))+D1/(100*MAX(D:D))+E1/(1000*MAX(E:E))
For an expandable number of rows/columns, use a helper row with the same number of columns as number columns in your data. The formulas below reference the following image (the data are in A1:G7):
B9-->=MAX(B1:B7)
C9 (fill over the remaining columns to G9)-->
=MAX(IF(MMULT(--($B1:B7=$B9:B9),--(ROW(INDIRECT("1:"&COLUMNS($B9:B9)))>0))=COLUMNS($B9:B9),C1:C7))
The following formula will give the answer (shown in A9 above):
=INDEX(A1:A7,MATCH(TRUE,(MMULT(--($B1:G7=$B9:G9),--(ROW(INDIRECT("1:"&COLUMNS($B9:G9)))>0))=COLUMNS($B9:G9)),0))
UPDATE WITH ALTERNATIVE METHOD
Using a helper column instead, again referencing the image below (the data are in A1:G7):
I1 (fill down to I7)-->
=SUM(--(MMULT(SIGN(B1:G1-$B$1:$G$7)*2^(COLUMN(G1)-COLUMN(A1:F1)),--(ROW(INDIRECT("1:"&COLUMNS(B1:G1)))>0))>0))
The following formula will give the answer (shown in J1 above):
=INDEX(A1:A7,MATCH(MAX(I1:I7),I1:I7,))
As a bonus, notice that the helper column corresponds to the order that you would get from sorting the data by each column left-to-right. In other words, you could use the helper column to perform a formula-based multi-column sort on strictly numeric data. For the last image, entering the following array formula into a range with the same dimensions as A1:G7 gives a descending sort on columns B through G:
=IF(A1:A7=A1:A7,INDEX(A1:G7,MATCH(ROW(A7)-ROW(A1:A7),I1:I7,0),))
I want to know if I can use a macro in Excel to separate data in a single column into different colums according to number of characters. For example, what I have is this in column A
A
AB
ABC
1A
564
8
What I need is this, in colums A, B and C
A AB ABC
8 1A 564
Thanks.
Use the following formula in a new column B next to Column A:
=IFERROR(INDEX($A$1:$A$6,SMALL(IF(LEN($A$1:$A$6)=1,ROW($A$1:$A$6),99999),ROW()),1),"")
Array Formula press Ctrl+Shift+Enter at the same time
and drag it down, it will write the Values of B whose Length is 1, and when it gives empty it means no more Values with Length 1
Small will find the Cell which length is 1 (Row()=1, 1st cell which length=1, Row()=2, 2nd cell which length =1 ...)
If will return all the rows for the corresponding condition
Index will return the Cell
Iferror return empty "" if no more match
For the second column write 2 instead of 1 in LEN($A$1:$A$6)=2
=IFERROR(INDEX($A$1:$A$6,SMALL(IF(LEN($A$1:$A$6)=2,ROW($A$1:$A$6),99999),ROW()),1),"")
For the third column write 3 in LEN($A$1:$A$6)=3
=IFERROR(INDEX($A$1:$A$6,SMALL(IF(LEN($A$1:$A$6)=3,ROW($A$1:$A$6),99999),ROW()),1),"")