Can I set different reporting frequency for different types of metrics in micrometer? For example I want send endpoints metrics with 10s step and the others with 5s step.
There's a property for reporting frequency per meter registry but AFAICT, there's no concept for reporting frequency per meter. If you'd like to pursue this, you can create an issue to request the feature in its issue tracker: https://github.com/micrometer-metrics/micrometer/issues
Related
I have set up Hazelcast with JCache, where I want to get a more comprehensive statistic of my cache usage. Mainly I want to see the cache entries' stats over some period of time (e.g. past 24 hrs), but the graph seems only allows me to select a point of time, and show the 5 mins statistics of it.
Is there a way I can update this behavior and create a more meaningful graph? Thanks!
Hazelcast MC version: 5.0.2
Example:
I want this graph to allow me to select a period of time, instead of a point of time.
I'm trying to use application insights to keep track of a counter of number of active streams in my application. I have 2 goals to achieve:
Show the current (or at least recent) number of active streams in a dashboard
Activate a kind of warning if the number exceeds a certain limit.
These streams can be quite long lived, and sometimes brief. So the number can sometimes change say 100 times a second, and sometimes remain unchanged for many hours.
I have been trying to track this active streams count as an application insights metric.
I'm incrementing a counter in my application when a new stream opens, and decrementing when one closes. On each change I use the telemetry client something like this
var myMetric = myTelemetryClient.GetMetric("Metricname");
myMetric.TrackValue(myCount);
When I query my metric values with Kusto, I see that because of these clusters of activity within a 10 sec period, my metric values get aggregated. For the purposes of my alarm, I can live with that, as I can look at the max value of the aggregate. But I can't present a dashboard of the number of active streams, as I have no way of knowing the number of active streams between my measurement points. I know the min value, max and average, but I don't know the last value of the aggregate period, and since it can be somewhere between 0 and 1000, its no help.
So the solution I have doesn't serve my needs, I thought of a couple of changes:
Adding a scheduled pump to my counter component, which will send the current counter value, once every say 5 minutes. But I don't like that I then have to add a thread for each of these counters.
Adding a timer to send the current value once, 5 minutes after the last change. Countdown gets reset each time the counter changes. This has the same problem as above, and does an excessive amount of work to reset the counter when it could be changing thousands of times a second.
In the end, I don't think my needs are all that exotic, so I wonder if I'm using app insights incorrectly.
Is there some way I can change the metric's behavior to suit my purposes? I appreciate that it's pre-aggregating before sending data in order to reduce ingest costs, but it's preventing me from solving a simple problem.
Is a metric even the right way to do this? Are there alternative approaches within app insights?
You can use TrackMetric instead of the GetMetric ceremony to track individual values withouth aggregation. From the docs:
Microsoft.ApplicationInsights.TelemetryClient.TrackMetric is not the preferred method for sending metrics. Metrics should always be pre-aggregated across a time period before being sent. Use one of the GetMetric(..) overloads to get a metric object for accessing SDK pre-aggregation capabilities. If you are implementing your own pre-aggregation logic, you can use the TrackMetric() method to send the resulting aggregates.
But you can also use events as described next:
If your application requires sending a separate telemetry item at every occasion without aggregation across time, you likely have a use case for event telemetry; see TelemetryClient.TrackEvent (Microsoft.ApplicationInsights.DataContracts.EventTelemetry).
Could you please help understand how azure metrics are calculated. For an example, we can see the request/total request graph, and a number at a given point in time (say 6000 at 4.34 PM) for Azure API Management. The request count has no meaning at a given point in time, but a measure for a given "period" of time. When i research, i found that the number represent the number of request received during the sampling interval.However, no further data is available on what the sampling interval is. Azure portal/metrics graphs has no setting to view/change sampling interval either.
So what's the sampling interval used for Azure metrics? or what does the total request count meaning at a given point in time?
(However, the application insight metrics allow you to set the sampling interval)
could you please shed some light? thanks
I think the comment from AjayKumar-MSFT is correct, so I summarize if it could help others:
Typically - ‘Requests’ - The total number of requests regardless of their resulting HTTP status code and where as ‘Requests In Application Queue’ is the number of requests in the application request queue. You can always change the 'chart Setting' for much detailed info, by going into the metric and ellipsis (...) /settings
I am using Jmeter (started using it a few days ago) as a tool to simulate a load of 30 threads using a csv data file that contains login credentials for 3 system users.
The objective I set out to achieve was to measure 30 users (threads) logging in and navigating to a page via the menu over a time span of 30 seconds.
I have set my thread group as:
Number of threads: 30
Ramp-up Perod: 30
Loop Count: 10
I ran the test successfully. Now I'd like to understand what the results mean and what is classed as good/bad measurements, and what can be suggested to improve the results. Below is a table of the results collated in the Summary report of Jmeter.
I have conducted research only to find blogs/sites telling me the same info as what is defined on the jmeter.apache.org site. One blog (Nicolas Vahlas) that I came across gave me some very useful information,but still hasn't help me understand what to do next with my results.
Can anyone help me understand these results and what I could do next following the execution of this test plan? Or point me in the right direction of an informative blog/site that will help me understand what to do next.
Many thanks.
According to me, Deviation is high.
You know your application better than all of us.
you should focus on, avg response time you got and max response frequency and value are acceptable to you and your users? This applies to throughput also.
It shows average response time is below 0.5 seconds and maximum response time is also below 1 second which are generally acceptable but that should be defined by you (Is it acceptable by your users). If answer is yes, try with more load to check scaling.
In you requirement it is mentioned that you need have 30 concurrent users performing different actions. The response time of your requests is less and you have ramp-up of 30 seconds. Can you please check total active threads during the test. I believe the time for which there will be 30 concurrent users in system is pretty short so the average response time that you are seeing seems to be misleading. I would suggest you run a test for some more time so that there will be 30 concurrent users in the system and that would be correct reading as per your requirements.
You can use Aggregate report instead of summary report. In performance testing
Throughput - Requests/Second
Response Time - 90th Percentile and
Target application resource utilization (CPU, Processor Queue Length and Memory)
can be used for analysis. Normally SLA for websites is 3 seconds but this requirement changes from application to application.
Your test results are good, considering if the users are actually logging into system/portal.
Samples: This means the no. of requests sent on a particular module.
Average: Average Response Time, for 300 samples.
Min: Min Response Time, among 300 samples (fastest among 300 samples).
Max: Max Response Time, among 300 samples (slowest among 300 samples).
Standard Deviation: A measure of the variation (for 300 samples).
Error: failure %age
Throughput: No. of request processed per second.
Hope this will help.
This is should be a fairly easy question for Logstash veterans.
When I use the metrics plugin, what does events.rate_5m mean?
Does it mean: Number of events per second in a 5 minute window?
Does it mean: Number of events every 5 minutes?
Also, what's the difference between using this over timer.rate_5m?
The documentation isn't very clear and I have problems understanding it.
Thanks in advance!
Logstash uses the Metriks library to generate the metrics.
According to that site:
A meter that measures the mean throughput and the one-, five-, and fifteen-minute exponentially-weighted moving average throughputs.
and
A timer measures the average time as well as throughput metrics via a meter.
A meter counts events and a timer is used to look at durations (you have to pass a name and a value into a timer).
To answer your specific question, the rate_5m is the per second rate over the last 5 minute sliding window.