pic
pic
ex. i have 2 column in this table if i write "if i = 1 then hide column 2" and when i = 1 , they hide only text, not hide table-column how can i hide all? thank you!
i weak in English.
The hide when has to include the whole column not only one cell.
In order to have full control of rows/cells hiding, you might want to write your own table in plain HTML.
There's no way to hide a table column when using the Notes client.
If you're going to display the table in a web browser then you could easily hide with css.
I currently am able to "hide" a column but it's for a very specific use case which is probably not helpful to you but may be to others. I would only use this if it's the last column in the table, the contents are there for programmatic control (buttons, etc) or non-essential information, and you're hiding for preview/read/print purposes.
Do the following on all cells of the column:
Define the hide-when
Set the border width to 0
Set the cell color to white (or whatever your form's background color is)
Of course, by doing this the border width and color will always be the same. There's no way to programmatically change those.
Related
Neither select-row work nor row-click works when the cell are editable. Anyway to get row selected?
If I click inbetween the cells then it works but it's not practicle click small space inbetween cells.
You really need to show an example of what you are trying to do. A JSFiddle would be helpful. Still if I'm following correctly what you want to add to your table layout is:
http://tabulator.info/docs/4.7/format#format-builtin
"Row Handle
The handle formatter fills the cell with hamburger bars, to be used as a row handle
{title:"Example", field:"example", formatter:"handle"}"
I think the image attached describes better than I can in words the functionality I am trying to locate within excel.
Is there a way to auto group based on the contents within the columns as shown? This is achievable for the example shown, but when there are up to say 30 Groups and many sub group types, I am wondering whether excel can auto-detect and work its way through the list, grouping as shown as it goes.
You can get a similar result using conditional formatting. select the whole table and create a new conditional format rule and choose formula and enter =A1=A2 set the format font to white (I've used very light grey to show that the data is still there)
To get the borders, do the same again and this time enter the formula =A1<>A2 and make the top border black.
It's not exactly the same as yours but it's close.
I have a report I am doing with SSRS 2008 with some rows that have multiple elements inside them. On the preview the row automatically expands to support the extra elements but however when I export the report to Excel it appears only as a single row with just the one element displayed, although all the elements are there when I double click the row or manually expand it.
I've checked everything...Can grow is set to true and the properties on the text box allows it's height to increase however it seems to ignore these.
Here it is in the preview
http://tinypic.com/r/b4wbdg/8
In Excel
http://tinypic.com/r/r084g3/8
Sorry about the links to the pictures and not in this question
Both CanGrow and CanShrink properties should be set to false. There is nothing like CanGrow and CanShrink in Excel. By setting them to false it will display the height as it is. Otherwise it will set the height to a default value.
This worked for me. Check this Row height not preserved when exporting to Excel thread for more suggestions.
Came across this (again) recently and thought I'd share my take...
Whether Excel correctly renders the height has to do with merged columns. Take note of your column alignments throughout all objects on the page. Any objects not tied to the data table itself (or embedded inside the data table) must be aligned with the columns of the table in question, at least for the cells that need to wrap text. If there is any overlap causing the table columns to be split and the cells of wrapped text to be re-merged, Excel will not recognize the row height by either setting the CanGrow to True or snapping the row to fit within Excel.
In the original post, the user mentioned rows with multiple elements inside of them. It is possible that those elements caused the column to split for the surrounding subtotals or adjacent groups with wrapped text.
Setting the CanGrow to False will simply prevent any automatic sizing of the row height by default for both the web view and Excel export, so I don't know if that's the ideal solution to this problem.
Both CanGrow and CanShrink properties should be set to false
This must be done for all cells in the row of the Tablix!!
Otherwise the data is not properly exported.
reduce the widths of the rows and it fixed my problem
I remove the header of the report, and all works perfectly.
I have other reports and I see now that if I remove the textboxes that are included on the sheet when exporting to excel, then the row heights in excel are sized properly.
I know this is an old question but I've been struggling with it. My issue was that I had a second field in a column where I inserted a placeholder underneath the field in the column. When exporting to Excel I wanted it to be tall enough that the second field would show underneath the main field in the column.
To get it to work for me, I inserted a blank column next to it and made it just wide enough for a single character. Then I click and hit enter several times to force it to be multiple lines. When I export, I have a blank column but otherwise it worked for me.
I asked this question on the LiveCode email list. No response, so I figure it must not be possible. I know about editing the template graphic that enables alternating row colors. That doesn't help me.
This lesson is the closest to what I have found, but it only sets the overlay color to empty cells. It also had an unwanted affect, where any data that was present in the grid no longer shows up.
http://lessons.runrev.com/s/lessons/m/datagrid/l/7327-how-do-i-override-the-default-behavior-for-rendering-data-to-a-cell
As a little experiment, since the data became invisible (note that I'm on WinXP), I tried placing an opaque graphic over the column I wish to colorize. I set the ink of the graphic to AddMax or AddOver, and it looked nice, but the text in the cells disappeared. Then I tried setting the ink to AddMin, and it still looks good, but the test shows through!!!!
So, I think this will work fine visually, but how can I pass a double-click through this graphic to the cell underneath (to allow cell editing only within this column)?
Yes, you can do this.
This suggestion comes from Trevor DeVore at http://www.bluemangolearning.com/
Create a custom column template using the property inspector. From there you can edit the behavior of the column to colorize the background color of the field for that column or just edit the field in the template group to change the color.
The background color will only show up in rows that have data, however.
First off I am new to FM but I have a good handle on the basics. What I need to do is this - in a contact information type layout I want to be able to alter the layout based on a specific field. Ex. When the record is brought up, the background of the layout will change colors for a client, another for vendor, etc.
I tried to change a label based on a field, with no success. My guess is that the layout is static and only the data fields change.
We use FM Pro.
Thanks,
Mark
FileMaker layouts are static, but there are still some things you can do to alter the layout based on the values of fields:
Calculation Fields
If you want the data shown in an area to change, you can use a Calculation field. A typical example of this would be a status field. To do this you would add a new field to your table and use enter a calculation on that field like:
Case (
IsEmpty(myTable::myField) ; "Please enter a value for myField." ;
myTable::myField = "wrong value" ; "Please enter a correct value for myField." ;
"Everything seems okay."
)
Conditional Formatting
To make things like background color change you can use a conditionally formatted field. I will typically add an empty numeric field (for this example we'll call it emptyField) and set it so that it can't be edited during modification.
If you place emptyField on your layout, below all the other fields and disallow the user to enter the field in either Browse or Find mode, you can then use conditional formatting to change the field's color.
Portal Hiding
You can use this technique when you want some elements of your UI to disappear when they aren't needed. For example, if you want a "submit" button to appear only when all of the records on a field are filled out.
To use this technique I will usually create a Calculated number field, called ReadyForSubmit, on the original table and give it a logical calculation like:
not IsEmpty(field1) and ... and not IsEmpty(fieldN)
(Note that the value of the above function would be 1 or 0)
I will then create a new Support table in my database and add to it a field One with a calculated value set to 1.
I will then make a relationship between myTable::readyForSubmit and Support::One.
On the layout, create a portal with one row. Put your Submit button in that layout. Now, when readyForSubmit calculates to 1 the button will appear. When it calculates to 0 the button will be hidden.
Hidden Tab Browser
Finally, you can use a tab browser where you set the title font size to 1 point, hide the border, and control the browser programmatically. You can use this for having different field arrangements for different types of records. To do this you would first give an Object name to each tab of the tab browser, say Tab1, Tab2, Tab3.
Then you would add a script, goToTab, with the logic for when you want to go to each tab. Say:
If (myTable::myField = "corn")
Go to Object (Tab1)
Else If (myTable::myField = "squash")
Go To Object (Tab2)
End If
You would then use Script Triggers to run goToTab when On Record Load.
With the release of filemaker 13 there may be another way to do this. You could use a slide control, name the panels in the control, and conditionally switch to the correct panel based on the record type.
you would drop the appropriate fields for the record type in each panel.
http://help.filemaker.com/app/answers/detail/a_id/12012/~/using-slide-controls-and-slide-panels-in-filemaker-pro