I cannot open a .lrr file with my laptop and I see the below error log message:
Error: "Parse command line error: The INSERT INTO statement contains
the following unknown field name 'F4'Make sure you have typed the name
correctly, and try the operation again"
This error message is not seen when :
I open the same .lrr with another pc
I open the .lra file of same result
Another information is about the result format that is in "Access 2000". I have supposed that issue is related to something I have installed/updated directly in Windows. But no uninstall/re-install procedure bring me to solution (I have also reinstalled LR but nothing change).
Vincenzo
This is highly due to regional configuration is not set properly in your system. Follow the steps below.
Open Control Panel.
Go to Region and Language
Make sure you setup below particulars:
Decimal Symbol as , (comma)
Digit Grouping Symbol as . (dot)
List Separator as ; (semicolon)
Apply the changes and open LR Analysis file.
Related
I have spent time googling but without results. I get following error when creating projects with latest android studio:
Invalid file name: 'con'
New Module was only partially completed.
Your project may not compile.
You may want to Undo to get back to the original state
I have also tried previous version of android studio, but without any result.
What could be the cause of this issue and how can I correct it? I am on Windows 10.
Thank you
I Feel silly now because it was because of con word in package name. The accepted answer helped.
A module name is automatically used as directory name.
As you are on Windows the file-system has several file- and folder-names that are disallowed. con is one such disallowed names (case insensitive).
This means no matter what file-system you use as long as you are running Android Studio on Windows you will never ab able to create a file or a folder named con.
Other disallowed file names are:
CON, PRN, AUX, NUL, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, and LPT9. source
Therefore you have two possibilities: Use a different name for the module or use a different OS.
In Robot Framework , I have segregated the details into Page objects, keywords and scripts.
After adding keywords in PO, I wanted to add details in Keywords. Here, in Settings section while I give the following details:
*** Settings ***
Library SeleniumLibrary
Resource Resources/PO/Sign-in.robot
I even tried using absolute path by referencing ../ at the beginning. Still, system is unable to recognize it and throwing an error message "Import File Not Found".
What Should I be doing? Please, let me know?
First, you show in the screenshot, the use of a variable ${Resources}, it would be normal for the IDE to not recognize that value for a path. Even so, running the test case may work as expected.
Second, if you want to use the relative path, then the correct value should be:
Resource ../PO/Sign-in.robot
I am trying to save a path file to a variable. It is part of a larger set of code. I keep getting a syntax error , but it is not obvious as to why. Whenever I take the code and run it separately in a different cell in jupyter notebook it works fine. It's just when I run it as part of the bigger code set that I get a syntax error.
Anyone have any idea why? I am unable to share my entire code as it contains some confidential details.
below is the code I run as part of the larger script
path = r"C:\Users\O34639\Desktop\Python_Scripts\SSI.xlsx"
I receive the error below
File "<ipython-input-193-2b5bd969f401>", line 51
path = r"C:\Users\O34639\Desktop\Python_Scripts\SSI.xlsx"
^SyntaxError: invalid syntax
when I run the code on it's own cell it works properly no issues, but I have no idea why it's not working when running it as part of the bigger script
I've tried using the escape \ and getting rid of the r character, but I still get the same message
matlab (2015b) in my new notebook ThinkPad function xlsread/ xlswrite not work
for every exist excel file， xlsread not load the data
xlswrite also not work in every path
error use xlsread (line251)
catch exception
if isempty(exception.identifier)
exception = MException('MATLAB:xlsreadold:FormatError','%s', exception.message);
end
throw(exception);
the method import data also not work for excel file。
I found this answer in
https://cn.mathworks.com/matlabcentral/answers/282688-why-my-excel-file-can-not-be-read-by-matlab hope it can help you:
Who has problem to read excel file, can follow this order.
1- open the excel> file, >option, >add in, manage then select COM ADD IN, and clear everything (unchecked). everything should be cleared (unchecked).
2- restart the PC, and open the matlab.
3- perform xlsread command.
NOTE: for those people who use foxit pdf reader, it is potential to face this problem, so follow mentioned order.
NOTE: sometimes by using the matlab, configuration of excel is changed in unknown way, therefore there is no way to open the usual excel file in windows by double click.
So, open excel from desktop icon, file> option,> advanced,> general and then make clear (unchecked) "the ignore applications that use dynamic data exchange (DDE)". (same information for NOTE 2: https://support.microsoft.com/en-us/kb/3001579) these are some error for excel worker with matlab and related command.
I have generated an excel file from xml. But i can not open it with Excel. Excel gives the following error opening it:
Problems came up in the following areas during load:
Table
Then it shows a message that the log file corresponding the error can be found at : C:/Documents and Setting/myUserName/Local Settings/Temporary Internet Files/Content.MSO/xxxxx.log
But i can not find Content.MSO folder in my windows. I checked folder settings and made all folders visible but i still can not access this folder. So that i can not analise the log file.
how could i find the generated log file?
I found the problem without analising the log file. i stil can not access the log file in temporary internet files. But i realised that i put a string(non-number) characters on a number-styled cell in Excel xml. So if you having the similar issues about your Excel file generated from xml, then have a look at if your cell values are appopriate with your cell data type.
If you type or paste the path of the log file into Explorer or your text editor of choice, you may find that the folder does exist, despite being invisible.
In my case it was a <Row> with an incorrect ss:Index
I was using a template and the last row had a fixed Index=100. If the number of rows I added exceeded 100, this last row had a wrong index and excel threw the error without any other message or log (MacOSX, Excel 15.25.1). I wish they printed more informative error messages, what a waste of our time.
Excel 2016. My error message was "Worksheet Settings". Path was pointing to non-existing file.
My cause of the problem was ExpandedRowCount not big enough for number of rows in Worksheet. If you add rows in XML directly (i.e. on a machine where Excel is not installed), make sure to increment number of rows in ExpandedRowCount.
yes.Even i too faced the same problem and problem was with the data type of cells ofexcel generated using xslt
In addition to checking the data being used vs "Type" assigned, make sure that the list of characters that need to be encoded for XML are indeed encoded.
I had a system that appeared to be working, but then some user data including & and < was throwing this error.
If you're not sure what's going on with your file, try http://www.xmlvalidation.com/ - that helped be spot the issue in a large file immediately.
I used this function to fix it, modified from this post:
function xmlsafe($s) {
return str_replace(array('&','>','<','"'), array('&','>','<','"'), $s);
}
and then run echo xmlsafe($myvalue) where you were just echoing $myvalue in your script.
This seems to be more appropriate for XML than htmlentities() or other options built into PHP.
I had the same issue, and the answer was - type of Cell was Number and some values doesn't converts to this type on my backend.
I had the SAME problem,
and its because de file is TOO BIG.
I try an extract from SAP, more little than the one with that make the error) and save it in XML file. and it WORK, no more error.
so maybe if you can save in 2 Excel files XML instead of 1 it will be good ;)
ALicia