I copied 'dbnetlib.dll' in the same directory where my application is located on the target device and the app is not working. Showing the above message.
I have also copied that dll to the windows folder but it is deleted automatically. Again I tried the 'sql.ppc.wce5.armv4i.cab' installation but failed.
Can anyone send me the right solution? It will be a great help for me.
Does the DLL work when you put it in Windows (before the reboot clears it, of course)?
If it does then you may need to change your import attributes specifying the full path of the dll or, if your device has permanent registry, you can add your installation folder to the system path by adding it to the "SystemPath"key under HKLM\Loader.
Related
No matter which of the three tizen studio 2.0 installers I try they all don't work as they won't accept any path. The CLI installer gives the most detailed description:
** The directory you specify is not allowed to install the Tizen Studio. Some tools of the Tizen Studio will not properly work in the directory with administrator privilege or read-only access rights for your account.=> path
I have tried starting the installer with admin rights and owning the destination folders. Additionally, I switched from JDK 9 to 8.
Still, there seems no way to get the installer running. Any ideas what the reason could be? Thanks!
I managed to install tizen studio and the SDK using the %appdata% path.
If anyone else has the problem, try e.g.
C:\Users\YourName\AppData\Roaming\Samsung\tizen-studio
This is definitely a flaw Samsung should take care of!
I've successfully installed the IDE version with the following method:
Download Tizen Studio Web IDE installer
Open installer with 7-zip archive manager
You should find tizen-sdk.zip archive
Open it and extract it into the C:\tizen-studio folder
Create C:\tizen-studio-data folder
Create sdk.info file inside C:\tizen-studio folder
Put following lines into this file
TIZEN_SDK_INSTALLED_PATH=C:\tizen-studio
TIZEN_SDK_DATA_PATH=C:\tizen-studio-data
You can download packages with C:\tizen-studio\package-manager\package-manager.exe
You can start IDE from C:\tizen-studio\ide\TizenStudio.exe
This worked for me, hope this helps...
#Henry was almost correct and his scenario works on CLI/IDE installers.
And here are actual restrictions on Win10x64 tizen-studio 2.0 installation I've found:
pointed SDK location needs to be in your user directory. For example:
C:\Users\MrSmith\Tizen\tizen-studio
Data location could be anywhere, but in case of CLI installation, it will be near SDK folder.
CLI installation actually does unzip only and all further system configuration needs to be done manually. So, if you need only CLI, you could unzip "web-cli_Tizen_Studio_2.0_windows-64.exe" with 7zip or any other proper archiver where you want and do further manual configuration. (See here https://developer.tizen.org/development/tizen-studio/web-tools/cli)
Probably, if you login under Administrator you will be able to install SDK anywhere. Just "Run as administrator" doesn't work, at least for me.
My system params:
Win10 Pro x64
Oracle JDK 1.8.0_152
Have a fan ;)
I solved this problem that way:
create folder (eg Tizen_Studio)
inside created folder create new (tizen_studio and tizen_studio_data)
add all permissions for that folders for your windows account user
select folders in installation proccess
Enjoy!
The regular way which Samsung provides is working for me:
Make sure you have enough disk space (Tizen Studio needs about 700 MB
on Win10)
Create an empty folder with 2 empty subfolders (e.g. Tizen_IDE->studio (subfolder #1) -> data (subfolder #2)
The important part on Windows 10 is to navigate to YOUR users directory:
For example your user name is Bob. Go to C:\ -> Users -> Bob.
Then create there the empty folder "Tizen_Studio" with the 2 mentioned subfolders.
Check with right-clicking on the Tizen_Studio folder -> Properties -> Security if your Username (here Bob) is listed in groups and users. Click on your profile there in the security tab and look if the folder has full access rights inside the checkboxes (btw this should be automatically set if you choose the right described environment).
Now in the installer dialog you can choose the studio folder for the ide/sdk and the data folder for the installing data request path.
Thats it! Just important to install it inside your username folder!
I had this problem as well (on my Windows 8.1 machine), and ended up using the previous version of Tizen Studio Installer (version 1.3)
https://download.tizen.org/sdk/Installer/tizen-studio_1.3/
It even does not work for me in %APP_DATA% and also not running the installer with Administrative privileges.
But I finally found a solution which worked for me:
Create a new and folder somewhere
disable all inherit privileges on this folder
grant explicit all privileges for your users to this folder
remove all other privileges, especially these for Administrator
Use this folder for Installation
Write useful sofware for tizen ;-)
How bout removing 32 bit Java client and installing 64 bit on win 10?
Worked for me, no one seemed to notice that Installer opened in 7zip has an installer.jar which needs to be run with java client.
Thanks for the advises on opening installer with 7zip.
I'm using Monkey X Studio since yesterday and want to "export" the game I've made with it for Windows (glfw). So I built the Game in Release Configuration, took the .exe and the data Folder and created an InnoSetup setup for it. When someone else installed and started the game, the error message "OpenAL32.dll is missing" appeared.
"The Application was unable to start correctly (0xc000007b). Click OK to close the Application".
Do you have any idea how I can fix this issue and export a setup for windows?
Luca
Simply "OpenAL32.dll is missing.
You need to copy this dll to target computer during installation.
This dll may be present in e.g. System folder on your computer but is missing on different computer.
Find the dll and add it to installer (copy to appropriate folder).
So I built a huge website for my company using the AnyCpu option. I didn't think it would matter - I have a 64bit machine with x64 windows, it's getting deployed to a x64 server, and there's no attached dll's, so it should just all be in 64, right?
Well, in the process of trying to implement some security, the company's support told us the application MUST be strictly x64. I figured it was, but to humor them, I went into the configuration manager, and changed all the target cpu, platform etc settings to x64.
Unfortunately now, it breaks when I hit f5 to run it. I've run into this before, I think, and I vaguely remember needing to delete some temp internet files somewhere, but I tried closing VS, deleting the bin folder, deleting the root folder from /framework/tempASPfiles... but I still get the BadImageFormatException - "an attempt was made to load the program with an incorrect format."
What's the best and fastest way to convert an app to x64? and am I right in thinking I need to delete some files somewhere?
Am trying to Deploy my visual studio 2012 vc++ application through Install Shield wizard.
The error am getting is :
Error 1324. The path .. contains an invalid character
I followed this tutorial and got succeed with a sample application .
http://www.flexerasoftware.com/webdocuments/productdemos/IS2010_VSLE_Demo/IS2010_VSLE_Demo-lite.html
But when i try to deploy my application, the setup file which i created is giving me this error.
Please help me
I've never seen this one before in the wild but it's described at:
http://support.microsoft.com/kb/292582
Basically it sounds like the computer has invalid data in the registry for one of the built in directories that Windows Installer resolves. It's an environmental issue rather then installer logic issue.
I'd have to see the installer log and computer registry to confirm or deny that though.
I had the same problem recently (with Installshield 2015). The problem was, that under Application Data/Files and Folders there was a definition for a folder called .. - so the setup would try to create a folder .. on the target system, which of course doesn't work.
Deleting that folder definition and moving its contained files to the parent folder definition fixed the problem for me.
Has anybody come across this problem during an application install?
OS is Windows Server 2k3
I do have local Admin access and I have installed this application on other machines.
Any help would be much appreciated, as Google isn't helping much
This issue may occur if one or more of the following files are missing from the Windows\System32 folder:
Stdole32.tlb
Stdole2.tlb
Stdole.tlb
To resolve this issue, expand the appropriate file from the Windows Server 2003 Installation disk:
(using the command prompt)
Expand cd_drive_letter:\i386\filename.tl_ drive:\Windows\system32\filename.tlb
and then press ENTER.
filename is the name of the file that you want to expand
drive is the letter of the drive where Windows is installed