Is there a built-in function with signature :: (Monad m) => m a -> a ?
Hoogle tells that there is no such function.
Can you explain why?
A monad only supplies two functions:
return :: Monad m => a -> m a
(>>=) :: Monad m => m a -> (a -> m b) -> m b
Both of these return something of type m a, so there is no way to combine these in any way to get a function of type Monad m => m a -> a. To do that, you'll need more than these two functions, so you need to know more about m than that it's a monad.
For example, the Identity monad has runIdentity :: Identity a -> a, and several monads have similar functions, but there is no way to provide it generically. In fact, the inability to "escape" from the monad is essential for monads like IO.
There is probably a better answer than this, but one way to see why you cannot have a type (Monad m) => m a -> a is to consider a null monad:
data Null a = Null
instance Monad Null where
return a = Null
ma >>= f = Null
Now (Monad m) => m a -> a means Null a -> a, ie getting something out of nothing. You can't do that.
This doesn't exist because Monad is a pattern for composition, not a pattern for decomposition. You can always put more pieces together with the interface it defines. It doesn't say a thing about taking anything apart.
Asking why you can't take something out is like asking why Java's Iterator interface doesn't contain a method for adding elements to what it's iterating over. It's just not what the Iterator interface is for.
And your arguments about specific types having a kind of extract function follows in the exact same way. Some particular implementation of Iterator might have an add function. But since it's not what Iterators are for, the presence that method on some particular instance is irrelevant.
And the presence of fromJust is just as irrelevant. It's not part of the behavior Monad is intended to describe. Others have given lots of examples of types where there is no value for extract to work on. But those types still support the intended semantics of Monad. This is important. It means that Monad is a more general interface than you are giving it credit for.
Suppose there was such a function:
extract :: Monad m => m a -> a
Now you could write a "function" like this:
appendLine :: String -> String
appendLine str = str ++ extract getLine
Unless the extract function was guaranteed never to terminate, this would violate referential transparency, because the result of appendLine "foo" would (a) depend on something other than "foo", (b) evaluate to different values when evaluated in different contexts.
Or in simpler words, if there was an actually useful extract operation Haskell would not be purely functional.
Is there a build-in function with signature :: (Monad m) => m a -> a ?
If Hoogle says there isn't...then there probably isn't, assuming your definition of "built in" is "in the base libraries".
Hoogle tells that there is no such function. Can you explain why?
That's easy, because Hoogle didn't find any function in the base libraries that matches that type signature!
More seriously, I suppose you were asking for the monadic explanation. The issues are safety and meaning. (See also my previous thoughts on magicMonadUnwrap :: Monad m => m a -> a)
Suppose I tell you I have a value which has the type [Int]. Since we know that [] is a monad, this is similar to telling you I have a value which has the type Monad m => m Int. So let's suppose you want to get the Int out of that [Int]. Well, which Int do you want? The first one? The last one? What if the value I told you about is actually an empty list? In that case, there isn't even an Int to give you! So for lists, it is unsafe to try and extract a single value willy-nilly like that. Even when it is safe (a non-empty list), you need a list-specific function (for example, head) to clarify what you mean by desiring f :: [Int] -> Int. Hopefully you can intuit from here that the meaning of Monad m => m a -> a is simply not well defined. It could hold multiple meanings for the same monad, or it could mean absolutely nothing at all for some monads, and sometimes, it's just simply not safe.
Because it may make no sense (actually, does make no sense in many instances).
For example, I might define a Parser Monad like this:
data Parser a = Parser (String ->[(a, String)])
Now there is absolutely no sensible default way to get a String out of a Parser String. Actually, there is no way at all to get a String out of this with just the Monad.
There is a useful extract function and some other functions related to this at http://hackage.haskell.org/package/comonad-5.0.4/docs/Control-Comonad.html
It's only defined for some functors/monads and it doesn't necessarily give you the whole answer but rather gives an answer. Thus there will be possible subclasses of comonad that give you intermediate stages of picking the answer where you could control it. Probably related to the possible subclasses of Traversable. I don't know if such things are defined anywhere.
Why hoogle doesn't list this function at all appears to be because the comonad package isn't indexed otherwise I think the Monad constraint would be warned and extract would be in the results for those Monads with a Comonad instance. Perhaps this is because the hoogle parser is incomplete and fails on some lines of code.
My alternative answers:
you can perform a - possibly recursive - case analysis if you've imported the type's constructors
You can slink your code that would use the extracted values into the monad using monad >>= \a -> return $ your code uses a here as an alternative code structure and as long as you can convert the monad to "IO ()" in a way that prints your outputs you're done. This doesn't look like extraction but maths isn't the same as the real world.
Well, technicaly there is unsafePerformIO for the IO monad.
But, as the name itself suggests, this function is evil and you should only use it if you really know what you are doing (and if you have to ask wether you know or not then you don't)
In my humble opinion the answers to the famous question "What is a monad?", especially the most voted ones, try to explain what is a monad without clearly explaining why monads are really necessary. Can they be explained as the solution to a problem?
Why do we need monads?
We want to program only using functions. ("functional programming (FP)" after all).
Then, we have a first big problem. This is a program:
f(x) = 2 * x
g(x,y) = x / y
How can we say what is to be executed first? How can we form an ordered sequence of functions (i.e. a program) using no more than functions?
Solution: compose functions. If you want first g and then f, just write f(g(x,y)). This way, "the program" is a function as well: main = f(g(x,y)). OK, but ...
More problems: some functions might fail (i.e. g(2,0), divide by 0). We have no "exceptions" in FP (an exception is not a function). How do we solve it?
Solution: Let's allow functions to return two kind of things: instead of having g : Real,Real -> Real (function from two reals into a real), let's allow g : Real,Real -> Real | Nothing (function from two reals into (real or nothing)).
But functions should (to be simpler) return only one thing.
Solution: let's create a new type of data to be returned, a "boxing type" that encloses maybe a real or be simply nothing. Hence, we can have g : Real,Real -> Maybe Real. OK, but ...
What happens now to f(g(x,y))? f is not ready to consume a Maybe Real. And, we don't want to change every function we could connect with g to consume a Maybe Real.
Solution: let's have a special function to "connect"/"compose"/"link" functions. That way, we can, behind the scenes, adapt the output of one function to feed the following one.
In our case: g >>= f (connect/compose g to f). We want >>= to get g's output, inspect it and, in case it is Nothing just don't call f and return Nothing; or on the contrary, extract the boxed Real and feed f with it. (This algorithm is just the implementation of >>= for the Maybe type). Also note that >>= must be written only once per "boxing type" (different box, different adapting algorithm).
Many other problems arise which can be solved using this same pattern: 1. Use a "box" to codify/store different meanings/values, and have functions like g that return those "boxed values". 2. Have a composer/linker g >>= f to help connecting g's output to f's input, so we don't have to change any f at all.
Remarkable problems that can be solved using this technique are:
having a global state that every function in the sequence of functions ("the program") can share: solution StateMonad.
We don't like "impure functions": functions that yield different output for same input. Therefore, let's mark those functions, making them to return a tagged/boxed value: IO monad.
Total happiness!
The answer is, of course, "We don't". As with all abstractions, it isn't necessary.
Haskell does not need a monad abstraction. It isn't necessary for performing IO in a pure language. The IO type takes care of that just fine by itself. The existing monadic desugaring of do blocks could be replaced with desugaring to bindIO, returnIO, and failIO as defined in the GHC.Base module. (It's not a documented module on hackage, so I'll have to point at its source for documentation.) So no, there's no need for the monad abstraction.
So if it's not needed, why does it exist? Because it was found that many patterns of computation form monadic structures. Abstraction of a structure allows for writing code that works across all instances of that structure. To put it more concisely - code reuse.
In functional languages, the most powerful tool found for code reuse has been composition of functions. The good old (.) :: (b -> c) -> (a -> b) -> (a -> c) operator is exceedingly powerful. It makes it easy to write tiny functions and glue them together with minimal syntactic or semantic overhead.
But there are cases when the types don't work out quite right. What do you do when you have foo :: (b -> Maybe c) and bar :: (a -> Maybe b)? foo . bar doesn't typecheck, because b and Maybe b aren't the same type.
But... it's almost right. You just want a bit of leeway. You want to be able to treat Maybe b as if it were basically b. It's a poor idea to just flat-out treat them as the same type, though. That's more or less the same thing as null pointers, which Tony Hoare famously called the billion-dollar mistake. So if you can't treat them as the same type, maybe you can find a way to extend the composition mechanism (.) provides.
In that case, it's important to really examine the theory underlying (.). Fortunately, someone has already done this for us. It turns out that the combination of (.) and id form a mathematical construct known as a category. But there are other ways to form categories. A Kleisli category, for instance, allows the objects being composed to be augmented a bit. A Kleisli category for Maybe would consist of (.) :: (b -> Maybe c) -> (a -> Maybe b) -> (a -> Maybe c) and id :: a -> Maybe a. That is, the objects in the category augment the (->) with a Maybe, so (a -> b) becomes (a -> Maybe b).
And suddenly, we've extended the power of composition to things that the traditional (.) operation doesn't work on. This is a source of new abstraction power. Kleisli categories work with more types than just Maybe. They work with every type that can assemble a proper category, obeying the category laws.
Left identity: id . f = f
Right identity: f . id = f
Associativity: f . (g . h) = (f . g) . h
As long as you can prove that your type obeys those three laws, you can turn it into a Kleisli category. And what's the big deal about that? Well, it turns out that monads are exactly the same thing as Kleisli categories. Monad's return is the same as Kleisli id. Monad's (>>=) isn't identical to Kleisli (.), but it turns out to be very easy to write each in terms of the other. And the category laws are the same as the monad laws, when you translate them across the difference between (>>=) and (.).
So why go through all this bother? Why have a Monad abstraction in the language? As I alluded to above, it enables code reuse. It even enables code reuse along two different dimensions.
The first dimension of code reuse comes directly from the presence of the abstraction. You can write code that works across all instances of the abstraction. There's the entire monad-loops package consisting of loops that work with any instance of Monad.
The second dimension is indirect, but it follows from the existence of composition. When composition is easy, it's natural to write code in small, reusable chunks. This is the same way having the (.) operator for functions encourages writing small, reusable functions.
So why does the abstraction exist? Because it's proven to be a tool that enables more composition in code, resulting in creating reusable code and encouraging the creation of more reusable code. Code reuse is one of the holy grails of programming. The monad abstraction exists because it moves us a little bit towards that holy grail.
Benjamin Pierce said in TAPL
A type system can be regarded as calculating a kind of static
approximation to the run-time behaviours of the terms in a program.
That's why a language equipped with a powerful type system is strictly more expressive, than a poorly typed language. You can think about monads in the same way.
As #Carl and sigfpe point, you can equip a datatype with all operations you want without resorting to monads, typeclasses or whatever other abstract stuff. However monads allow you not only to write reusable code, but also to abstract away all redundant detailes.
As an example, let's say we want to filter a list. The simplest way is to use the filter function: filter (> 3) [1..10], which equals [4,5,6,7,8,9,10].
A slightly more complicated version of filter, that also passes an accumulator from left to right, is
swap (x, y) = (y, x)
(.*) = (.) . (.)
filterAccum :: (a -> b -> (Bool, a)) -> a -> [b] -> [b]
filterAccum f a xs = [x | (x, True) <- zip xs $ snd $ mapAccumL (swap .* f) a xs]
To get all i, such that i <= 10, sum [1..i] > 4, sum [1..i] < 25, we can write
filterAccum (\a x -> let a' = a + x in (a' > 4 && a' < 25, a')) 0 [1..10]
which equals [3,4,5,6].
Or we can redefine the nub function, that removes duplicate elements from a list, in terms of filterAccum:
nub' = filterAccum (\a x -> (x `notElem` a, x:a)) []
nub' [1,2,4,5,4,3,1,8,9,4] equals [1,2,4,5,3,8,9]. A list is passed as an accumulator here. The code works, because it's possible to leave the list monad, so the whole computation stays pure (notElem doesn't use >>= actually, but it could). However it's not possible to safely leave the IO monad (i.e. you cannot execute an IO action and return a pure value — the value always will be wrapped in the IO monad). Another example is mutable arrays: after you have leaved the ST monad, where a mutable array live, you cannot update the array in constant time anymore. So we need a monadic filtering from the Control.Monad module:
filterM :: (Monad m) => (a -> m Bool) -> [a] -> m [a]
filterM _ [] = return []
filterM p (x:xs) = do
flg <- p x
ys <- filterM p xs
return (if flg then x:ys else ys)
filterM executes a monadic action for all elements from a list, yielding elements, for which the monadic action returns True.
A filtering example with an array:
nub' xs = runST $ do
arr <- newArray (1, 9) True :: ST s (STUArray s Int Bool)
let p i = readArray arr i <* writeArray arr i False
filterM p xs
main = print $ nub' [1,2,4,5,4,3,1,8,9,4]
prints [1,2,4,5,3,8,9] as expected.
And a version with the IO monad, which asks what elements to return:
main = filterM p [1,2,4,5] >>= print where
p i = putStrLn ("return " ++ show i ++ "?") *> readLn
E.g.
return 1? -- output
True -- input
return 2?
False
return 4?
False
return 5?
True
[1,5] -- output
And as a final illustration, filterAccum can be defined in terms of filterM:
filterAccum f a xs = evalState (filterM (state . flip f) xs) a
with the StateT monad, that is used under the hood, being just an ordinary datatype.
This example illustrates, that monads not only allow you to abstract computational context and write clean reusable code (due to the composability of monads, as #Carl explains), but also to treat user-defined datatypes and built-in primitives uniformly.
I don't think IO should be seen as a particularly outstanding monad, but it's certainly one of the more astounding ones for beginners, so I'll use it for my explanation.
Naïvely building an IO system for Haskell
The simplest conceivable IO system for a purely-functional language (and in fact the one Haskell started out with) is this:
main₀ :: String -> String
main₀ _ = "Hello World"
With lazyness, that simple signature is enough to actually build interactive terminal programs – very limited, though. Most frustrating is that we can only output text. What if we added some more exciting output possibilities?
data Output = TxtOutput String
| Beep Frequency
main₁ :: String -> [Output]
main₁ _ = [ TxtOutput "Hello World"
-- , Beep 440 -- for debugging
]
cute, but of course a much more realistic “alterative output” would be writing to a file. But then you'd also want some way to read from files. Any chance?
Well, when we take our main₁ program and simply pipe a file to the process (using operating system facilities), we have essentially implemented file-reading. If we could trigger that file-reading from within the Haskell language...
readFile :: Filepath -> (String -> [Output]) -> [Output]
This would use an “interactive program” String->[Output], feed it a string obtained from a file, and yield a non-interactive program that simply executes the given one.
There's one problem here: we don't really have a notion of when the file is read. The [Output] list sure gives a nice order to the outputs, but we don't get an order for when the inputs will be done.
Solution: make input-events also items in the list of things to do.
data IO₀ = TxtOut String
| TxtIn (String -> [Output])
| FileWrite FilePath String
| FileRead FilePath (String -> [Output])
| Beep Double
main₂ :: String -> [IO₀]
main₂ _ = [ FileRead "/dev/null" $ \_ ->
[TxtOutput "Hello World"]
]
Ok, now you may spot an imbalance: you can read a file and make output dependent on it, but you can't use the file contents to decide to e.g. also read another file. Obvious solution: make the result of the input-events also something of type IO, not just Output. That sure includes simple text output, but also allows reading additional files etc..
data IO₁ = TxtOut String
| TxtIn (String -> [IO₁])
| FileWrite FilePath String
| FileRead FilePath (String -> [IO₁])
| Beep Double
main₃ :: String -> [IO₁]
main₃ _ = [ TxtIn $ \_ ->
[TxtOut "Hello World"]
]
That would now actually allow you to express any file operation you might want in a program (though perhaps not with good performance), but it's somewhat overcomplicated:
main₃ yields a whole list of actions. Why don't we simply use the signature :: IO₁, which has this as a special case?
The lists don't really give a reliable overview of program flow anymore: most subsequent computations will only be “announced” as the result of some input operation. So we might as well ditch the list structure, and simply cons a “and then do” to each output operation.
data IO₂ = TxtOut String IO₂
| TxtIn (String -> IO₂)
| Terminate
main₄ :: IO₂
main₄ = TxtIn $ \_ ->
TxtOut "Hello World"
Terminate
Not too bad!
So what has all of this to do with monads?
In practice, you wouldn't want to use plain constructors to define all your programs. There would need to be a good couple of such fundamental constructors, yet for most higher-level stuff we would like to write a function with some nice high-level signature. It turns out most of these would look quite similar: accept some kind of meaningfully-typed value, and yield an IO action as the result.
getTime :: (UTCTime -> IO₂) -> IO₂
randomRIO :: Random r => (r,r) -> (r -> IO₂) -> IO₂
findFile :: RegEx -> (Maybe FilePath -> IO₂) -> IO₂
There's evidently a pattern here, and we'd better write it as
type IO₃ a = (a -> IO₂) -> IO₂ -- If this reminds you of continuation-passing
-- style, you're right.
getTime :: IO₃ UTCTime
randomRIO :: Random r => (r,r) -> IO₃ r
findFile :: RegEx -> IO₃ (Maybe FilePath)
Now that starts to look familiar, but we're still only dealing with thinly-disguised plain functions under the hood, and that's risky: each “value-action” has the responsibility of actually passing on the resulting action of any contained function (else the control flow of the entire program is easily disrupted by one ill-behaved action in the middle). We'd better make that requirement explicit. Well, it turns out those are the monad laws, though I'm not sure we can really formulate them without the standard bind/join operators.
At any rate, we've now reached a formulation of IO that has a proper monad instance:
data IO₄ a = TxtOut String (IO₄ a)
| TxtIn (String -> IO₄ a)
| TerminateWith a
txtOut :: String -> IO₄ ()
txtOut s = TxtOut s $ TerminateWith ()
txtIn :: IO₄ String
txtIn = TxtIn $ TerminateWith
instance Functor IO₄ where
fmap f (TerminateWith a) = TerminateWith $ f a
fmap f (TxtIn g) = TxtIn $ fmap f . g
fmap f (TxtOut s c) = TxtOut s $ fmap f c
instance Applicative IO₄ where
pure = TerminateWith
(<*>) = ap
instance Monad IO₄ where
TerminateWith x >>= f = f x
TxtOut s c >>= f = TxtOut s $ c >>= f
TxtIn g >>= f = TxtIn $ (>>=f) . g
Obviously this is not an efficient implementation of IO, but it's in principle usable.
Monads serve basically to compose functions together in a chain. Period.
Now the way they compose differs across the existing monads, thus resulting in different behaviors (e.g., to simulate mutable state in the state monad).
The confusion about monads is that being so general, i.e., a mechanism to compose functions, they can be used for many things, thus leading people to believe that monads are about state, about IO, etc, when they are only about "composing functions".
Now, one interesting thing about monads, is that the result of the composition is always of type "M a", that is, a value inside an envelope tagged with "M". This feature happens to be really nice to implement, for example, a clear separation between pure from impure code: declare all impure actions as functions of type "IO a" and provide no function, when defining the IO monad, to take out the "a" value from inside the "IO a". The result is that no function can be pure and at the same time take out a value from an "IO a", because there is no way to take such value while staying pure (the function must be inside the "IO" monad to use such value). (NOTE: well, nothing is perfect, so the "IO straitjacket" can be broken using "unsafePerformIO : IO a -> a" thus polluting what was supposed to be a pure function, but this should be used very sparingly and when you really know to be not introducing any impure code with side-effects.
Monads are just a convenient framework for solving a class of recurring problems. First, monads must be functors (i.e. must support mapping without looking at the elements (or their type)), they must also bring a binding (or chaining) operation and a way to create a monadic value from an element type (return). Finally, bind and return must satisfy two equations (left and right identities), also called the monad laws. (Alternatively one could define monads to have a flattening operation instead of binding.)
The list monad is commonly used to deal with non-determinism. The bind operation selects one element of the list (intuitively all of them in parallel worlds), lets the programmer to do some computation with them, and then combines the results in all worlds to single list (by concatenating, or flattening, a nested list). Here is how one would define a permutation function in the monadic framework of Haskell:
perm [e] = [[e]]
perm l = do (leader, index) <- zip l [0 :: Int ..]
let shortened = take index l ++ drop (index + 1) l
trailer <- perm shortened
return (leader : trailer)
Here is an example repl session:
*Main> perm "a"
["a"]
*Main> perm "ab"
["ab","ba"]
*Main> perm ""
[]
*Main> perm "abc"
["abc","acb","bac","bca","cab","cba"]
It should be noted that the list monad is in no way a side effecting computation. A mathematical structure being a monad (i.e. conforming to the above mentioned interfaces and laws) does not imply side effects, though side-effecting phenomena often nicely fit into the monadic framework.
You need monads if you have a type constructor and functions that returns values of that type family. Eventually, you would like to combine these kind of functions together. These are the three key elements to answer why.
Let me elaborate. You have Int, String and Real and functions of type Int -> String, String -> Real and so on. You can combine these functions easily, ending with Int -> Real. Life is good.
Then, one day, you need to create a new family of types. It could be because you need to consider the possibility of returning no value (Maybe), returning an error (Either), multiple results (List) and so on.
Notice that Maybe is a type constructor. It takes a type, like Int and returns a new type Maybe Int. First thing to remember, no type constructor, no monad.
Of course, you want to use your type constructor in your code, and soon you end with functions like Int -> Maybe String and String -> Maybe Float. Now, you can't easily combine your functions. Life is not good anymore.
And here's when monads come to the rescue. They allow you to combine that kind of functions again. You just need to change the composition . for >==.
Why do we need monadic types?
Since it was the quandary of I/O and its observable effects in nonstrict languages like Haskell that brought the monadic interface to such prominence:
[...] monads are used to address the more general problem of computations (involving state, input/output, backtracking, ...) returning values: they do not solve any input/output-problems directly but rather provide an elegant and flexible abstraction of many solutions to related problems. [...] For instance, no less than three different input/output-schemes are used to solve these basic problems in Imperative functional programming, the paper which originally proposed `a new model, based on monads, for performing input/output in a non-strict, purely functional language'. [...]
[Such] input/output-schemes merely provide frameworks in which side-effecting operations can safely be used with a guaranteed order of execution and without affecting the properties of the purely functional parts of the language.
Claus Reinke (pages 96-97 of 210).
(emphasis by me.)
[...] When we write effectful code – monads or no monads – we have to constantly keep in mind the context of expressions we pass around.
The fact that monadic code ‘desugars’ (is implementable in terms of) side-effect-free code is irrelevant. When we use monadic notation, we program within that notation – without considering what this notation desugars into. Thinking of the desugared code breaks the monadic abstraction. A side-effect-free, applicative code is normally compiled to (that is, desugars into) C or machine code. If the desugaring argument has any force, it may be applied just as well to the applicative code, leading to the conclusion that it all boils down to the machine code and hence all programming is imperative.
[...] From the personal experience, I have noticed that the mistakes I make when writing monadic code are exactly the mistakes I made when programming in C. Actually, monadic mistakes tend to be worse, because monadic notation (compared to that of a typical imperative language) is ungainly and obscuring.
Oleg Kiselyov (page 21 of 26).
The most difficult construct for students to understand is the monad. I introduce IO without mentioning monads.
Olaf Chitil.
More generally:
Still, today, over 25 years after the introduction of the concept of monads to the world of functional programming, beginning functional programmers struggle to grasp the concept of monads. This struggle is exemplified by the numerous blog posts about the effort of trying to learn about monads. From our own experience we notice that even at university level, bachelor level students often struggle to comprehend monads and consistently score poorly on monad-related exam questions.
Considering that the concept of monads is not likely to disappear from the functional programming landscape any time soon, it is vital that we, as the functional programming community, somehow overcome the problems novices encounter when first studying monads.
Tim Steenvoorden, Jurriën Stutterheim, Erik Barendsen and Rinus Plasmeijer.
If only there was another way to specify "a guaranteed order of execution" in Haskell, while keeping the ability to separate regular Haskell definitions from those involved in I/O (and its observable effects) - translating this variation of Philip Wadler's echo:
val echoML : unit -> unit
fun echoML () = let val c = getcML () in
if c = #"\n" then
()
else
let val _ = putcML c in
echoML ()
end
fun putcML c = TextIO.output1(TextIO.stdOut,c);
fun getcML () = valOf(TextIO.input1(TextIO.stdIn));
...could then be as simple as:
echo :: OI -> ()
echo u = let !(u1:u2:u3:_) = partsOI u in
let !c = getChar u1 in
if c == '\n' then
()
else
let !_ = putChar c u2 in
echo u3
where:
data OI -- abstract
foreign import ccall "primPartOI" partOI :: OI -> (OI, OI)
⋮
foreign import ccall "primGetCharOI" getChar :: OI -> Char
foreign import ccall "primPutCharOI" putChar :: Char -> OI -> ()
⋮
and:
partsOI :: OI -> [OI]
partsOI u = let !(u1, u2) = partOI u in u1 : partsOI u2
How would this work? At run-time, Main.main receives an initial OI pseudo-data value as an argument:
module Main(main) where
main :: OI -> ()
⋮
...from which other OI values are produced, using partOI or partsOI. All you have to do is ensure each new OI value is used at most once, in each call to an OI-based definition, foreign or otherwise. In return, you get back a plain ordinary result - it isn't e.g. paired with some odd abstract state, or requires the use of a callback continuation, etc.
Using OI, instead of the unit type () like Standard ML does, means we can avoid always having to use the monadic interface:
Once you're in the IO monad, you're stuck there forever, and are reduced to Algol-style imperative programming.
Robert Harper.
But if you really do need it:
type IO a = OI -> a
unitIO :: a -> IO a
unitIO x = \ u -> let !_ = partOI u in x
bindIO :: IO a -> (a -> IO b) -> IO b
bindIO m k = \ u -> let !(u1, u2) = partOI u in
let !x = m u1 in
let !y = k x u2 in
y
⋮
So, monadic types aren't always needed - there are other interfaces out there:
LML had a fully fledged implementation of oracles running of a multi-processor (a Sequent Symmetry) back in ca 1989. The description in the Fudgets thesis refers to this implementation. It was fairly pleasant to work with and quite practical.
[...]
These days everything is done with monads so other solutions are sometimes forgotten.
Lennart Augustsson (2006).
Wait a moment: since it so closely resembles Standard ML's direct use of effects, is this approach and its use of pseudo-data referentially transparent?
Absolutely - just find a suitable definition of "referential transparency"; there's plenty to choose from...
Is there a built-in function with signature :: (Monad m) => m a -> a ?
Hoogle tells that there is no such function.
Can you explain why?
A monad only supplies two functions:
return :: Monad m => a -> m a
(>>=) :: Monad m => m a -> (a -> m b) -> m b
Both of these return something of type m a, so there is no way to combine these in any way to get a function of type Monad m => m a -> a. To do that, you'll need more than these two functions, so you need to know more about m than that it's a monad.
For example, the Identity monad has runIdentity :: Identity a -> a, and several monads have similar functions, but there is no way to provide it generically. In fact, the inability to "escape" from the monad is essential for monads like IO.
There is probably a better answer than this, but one way to see why you cannot have a type (Monad m) => m a -> a is to consider a null monad:
data Null a = Null
instance Monad Null where
return a = Null
ma >>= f = Null
Now (Monad m) => m a -> a means Null a -> a, ie getting something out of nothing. You can't do that.
This doesn't exist because Monad is a pattern for composition, not a pattern for decomposition. You can always put more pieces together with the interface it defines. It doesn't say a thing about taking anything apart.
Asking why you can't take something out is like asking why Java's Iterator interface doesn't contain a method for adding elements to what it's iterating over. It's just not what the Iterator interface is for.
And your arguments about specific types having a kind of extract function follows in the exact same way. Some particular implementation of Iterator might have an add function. But since it's not what Iterators are for, the presence that method on some particular instance is irrelevant.
And the presence of fromJust is just as irrelevant. It's not part of the behavior Monad is intended to describe. Others have given lots of examples of types where there is no value for extract to work on. But those types still support the intended semantics of Monad. This is important. It means that Monad is a more general interface than you are giving it credit for.
Suppose there was such a function:
extract :: Monad m => m a -> a
Now you could write a "function" like this:
appendLine :: String -> String
appendLine str = str ++ extract getLine
Unless the extract function was guaranteed never to terminate, this would violate referential transparency, because the result of appendLine "foo" would (a) depend on something other than "foo", (b) evaluate to different values when evaluated in different contexts.
Or in simpler words, if there was an actually useful extract operation Haskell would not be purely functional.
Is there a build-in function with signature :: (Monad m) => m a -> a ?
If Hoogle says there isn't...then there probably isn't, assuming your definition of "built in" is "in the base libraries".
Hoogle tells that there is no such function. Can you explain why?
That's easy, because Hoogle didn't find any function in the base libraries that matches that type signature!
More seriously, I suppose you were asking for the monadic explanation. The issues are safety and meaning. (See also my previous thoughts on magicMonadUnwrap :: Monad m => m a -> a)
Suppose I tell you I have a value which has the type [Int]. Since we know that [] is a monad, this is similar to telling you I have a value which has the type Monad m => m Int. So let's suppose you want to get the Int out of that [Int]. Well, which Int do you want? The first one? The last one? What if the value I told you about is actually an empty list? In that case, there isn't even an Int to give you! So for lists, it is unsafe to try and extract a single value willy-nilly like that. Even when it is safe (a non-empty list), you need a list-specific function (for example, head) to clarify what you mean by desiring f :: [Int] -> Int. Hopefully you can intuit from here that the meaning of Monad m => m a -> a is simply not well defined. It could hold multiple meanings for the same monad, or it could mean absolutely nothing at all for some monads, and sometimes, it's just simply not safe.
Because it may make no sense (actually, does make no sense in many instances).
For example, I might define a Parser Monad like this:
data Parser a = Parser (String ->[(a, String)])
Now there is absolutely no sensible default way to get a String out of a Parser String. Actually, there is no way at all to get a String out of this with just the Monad.
There is a useful extract function and some other functions related to this at http://hackage.haskell.org/package/comonad-5.0.4/docs/Control-Comonad.html
It's only defined for some functors/monads and it doesn't necessarily give you the whole answer but rather gives an answer. Thus there will be possible subclasses of comonad that give you intermediate stages of picking the answer where you could control it. Probably related to the possible subclasses of Traversable. I don't know if such things are defined anywhere.
Why hoogle doesn't list this function at all appears to be because the comonad package isn't indexed otherwise I think the Monad constraint would be warned and extract would be in the results for those Monads with a Comonad instance. Perhaps this is because the hoogle parser is incomplete and fails on some lines of code.
My alternative answers:
you can perform a - possibly recursive - case analysis if you've imported the type's constructors
You can slink your code that would use the extracted values into the monad using monad >>= \a -> return $ your code uses a here as an alternative code structure and as long as you can convert the monad to "IO ()" in a way that prints your outputs you're done. This doesn't look like extraction but maths isn't the same as the real world.
Well, technicaly there is unsafePerformIO for the IO monad.
But, as the name itself suggests, this function is evil and you should only use it if you really know what you are doing (and if you have to ask wether you know or not then you don't)
I've created a combobox from converting a xmlWidget to a comboBox with the function castTocomboBox and now I want to get the text or the index of the active item. The problem is that if I use the comboBoxGetActive function it returns an IO Int result and I need to know how can I obtain the Int value. I tried to read about monads so I could understand what one could do in a situation like this but I don't seem to understand. I appreciate all the help I can get. I should probably mention that I use Glade and gtk2hs.
As a general rule you write something like this:
do
x <- somethingThatReturnsIO
somethingElseThatReturnsIO $ pureFunction x
There is no way to get the "Int" out of an "IO Int", except to do something else in the IO Monad.
In monad terms, the above code desugars into
somethingThatReturnsIO >>= (\x -> somethingElseThatReturnsIO $ pureFunction x)
The ">>=" operator (pronounced "bind") does the magic of converting the "IO Int" into an "Int", but it refuses to give that Int straight to you. It will only pass that value into another function as an argument, and that function must return another value in "IO". Meditate on the type of bind for the IO monad for a few minutes, and you may be enlightened:
>>= :: IO a -> (a -> IO b) -> IO b
The first argument is your initial "IO Int" value that "comboBoxGetActive" is returning. The second is a function that takes the Int value and turns it into some other IO value. Thus you can process the Int, but the results of doing so never escape from the IO monad.
(Of course there is the infamous "unsafePerformIO", but at your level of knowledge you may be certain that if you use it then you are doing it wrong.)
(Actually the desugaring is rather more complicated to allow for failed pattern matches. But you can pretend what I wrote is true)
Well, there is unsafePerformIO: http://haskell.org/ghc/docs/6.12.1/html/libraries/base-4.2.0.0/System-IO-Unsafe.html#v:unsafePerformIO
(If you want to know how to find this method: Go to http://www.haskell.org/hoogle and search for the signature you need, here IO a -> a)
That said, you probably heard of "What happens in IO stays in IO". And there are very good reasons for this (just read the documentation of unsafePerformIO). So you very likely have a design problem, but in order to get help from experienced Haskellers (I'm certainly not), you need to describe your problem more detailed.
To understand what those types are –step by step–, first look up what Maybe and List are:
data Maybe a = Nothing | Just a
data [a] = [] | a : [a]
(Maybe a) is a different type than (a), like (Maybe Int) differs from (Int).
Example values of the type (Maybe Int) are
Just 5 and Nothing.
A List of (a)s can be written as ([ ] a) and as ([a]). Example values of ([Int]) are [1,7,42] and [ ].
Now, an (IO a) is a different thing than (a), too: It is an Input/Output-computation that calculates a value of type (a). In other words: it is a script or program, which has to be executed to generate a value of type (a).
An Example of (IO String) is getLine, which reads a line of text from standard-input.
Now, the type of comboBoxGetActive is:
comboBoxGetActive :: ComboBoxClass self => self -> IO Int
That means, that comboBoxGetActive is a function (->) that maps from any type that has an instance of the type-class ComboBoxClass (primitive type-classes are somehow similar to java-interfaces) to an (IO Int). Each time, this function (->) is evaluated with the same input value of this type (self) (whatever that type is), it results in the same value: It is always the same value of type (IO Int), that means that it is always the same script. But when you execute that same script at different times, it could produce different values of type (Int).
The main function of your program has the type (IO ()), that means that the compiler and the runtime system evaluate the equations that you program in this functional language to the value of main, which will be executed as soon as you start the program.