I have a problem when using VLOOKUP in excel for MAC 2011. I am looking up for a value two column in different sheet, Column A is the one I want to check, Column B is the reference.
=VLOOKUP(A1, Sheet2!$A$1:$B$1000,2,0)
Some of boxes in Column A get a value return, but the other cannot. For those which cannot, when I retype the words inside the box, and I get the value returned.
I try to copy the Column A and selectively paste with value only, but those cannot get a returned value remained the same.
I guest there is something wrong with the format, but I cannot fix it. Please help.
Seems likely an issue with trailing spaces. With or without in the Table-array can be handled by adapting your formula to:
=VLOOKUP("*"&A1&"*",Sheet2!$A$1:$B$1000,2,0)
(provided you don't have something like manifestation as well as station in ColumnA!).
If your source data has leading or trailing spaces that your Table_array does not then the recommended solution is to remove those by a formula such as:
=TRIM(A1)
copied down to suit and then that array inserted back to A1 with Paste Special, Values.
Another possibility is that you may be trying to match a value to text that looks like a value (or vice versa).
Related
With the special character '$' I can prevent an Excel formula from changing its reference when the cell itself is copied (e.g '$A$1').
But is there also a special character that prevents an Excel formula from changing its reference when the referenced cell is moved?
Here's an example:
I have:
Now I move the cells 'A1:A3' down one row. So the formulas in the cells 'C1:C3' change:
But I don't want that the formulas in the cells 'C1:C3' change. They should remain unchanged:
Try formula:
=IF(INDEX(A:A,ROW(1:1))=INDEX(B:B,ROW(1:1)),"Same","Not same")
the formula always work, regardless of any column been delete besides columns A or B
If you always want to refer to A1, then you can't just use A1 as a reference, because, as you have seen, Excel will adjust that reference if rows are inserted above.
Instead, use Index(A:A,1) . That will always return the value from the first row of column A.
=if(index(A:A,1)=index(B:B,1),"same","not")
Edit after comment: If this does not suit your purpose, maybe you need to redesign your spreadsheet so that the position of things does not change all the time. This looks like you are adding new data at the top of a list.
Excel works from top to bottom and things will be a lot easier if new data is added at the bottom of a list. You can always use other Excel tools to change the sort order if you want to have the data sorted in reverse chronological order.
Use formula in C1:
=IF(INDEX(A:A,ROW(ZZ1))=INDEX(B:B,ROW(ZZ1)),"Same","Not same")
and copy down.
I am working in Excel and I am wanting to find out if there are matches in one sheet based on a list in the other sheet.
I have pasted the values in a list and want to return their corresponding value from another sheet. The cells that contain letters and numbers work correctly (example: D5765000), but for some reason if the cell has only numbers, Excel is not able to find it in the other sheet, even though it exists.
I pasted a value 745‐3000 in the list and I am looking for this corresponding value in another sheet. It shows as #N/A on the lookup indicating it doesn't exist in the other sheet. However, if I delete the 745‐3000 and manually type 745-3000, then Excel somehow does recognize the value and find it in the other sheet.
The formatting is exactly the same in both and there are no spaces in either list. I cannot understand why Excel won't recognize the pasted value of 745-3000. Any ideas?
Excel is reading the "-" with a different code than it is with a manually typed "-"
Isolate the "-" and use to find and replace. Does some data contain multiple offending "-"'s?
=REPLACE(H4,FIND(G4,H4),1,"-")
EDIT: Switched from code to Unicode
TY #ron
We find the offending char using the set up pictured below:
Some of the formulas used:
Yellow Cells:
=UNICODE(MID($A$3,C4,1))
Light Blue Cells:
=UNICODE(MID($E$3,C4,1))
At the bottom we check to see what code we get from the value. I get a VALUE mark with from the unicode value of "-"
I'm trying to use formula to copy data from one worksheet to another where a column matches a certain value.
To be more specific, I want Working!A2:E100 to contain Data!A2:E100 but only for those rows where Data!C2:100 contains the value "Fixed".
Doing this with leaving blank rows is simple, I just create the formula:
=IF(Data!$C2="Fixed", Data!A2, "")
And copy that formula across all the cells.
But then I thought I'd get clever and have it not copy across blank lines, and entered a maze of unclear excel tutorials and vague error messages.
I've created this formula:
=INDEX(Data!A2:Data!A200, MATCH("Fixed", Data!$C$1:Data!$C$200, 0))
And entered it as an array formula using ctrl shift enter.
However all I get is the contents of Data!A2 repeated over and over in every cell of my spreadsheet.
Does anyone need to know what I need to do to make this work?
This is my attempt at a local prototype following the example in BruceWayne's answer, the results are visible:
As you can see "Row 2" just appears repeatedly in the result column. Excel doesn't seem to have an easy way to see what version it is any more but this seems to be a pretty recent one, it's got the ribbon with the file menu and all menu headings are capitalized.
Here's a formula you can use (note: enter this as an array):
=IFERROR(INDEX(A$1:A$200,SMALL(IF(C$1:C$200="Fixed",ROW(A$1:A$200)-ROW(A$1)+1),ROWS(A$1:A1))),"")
You may need to tweak the ranges, I think I got them to match yours, but again, probably need to tweak. You can then drag this down, and it'll fill in with the values from column A, skipping any blanks.
Edit: Here's a screenshot to (hopefully) help show what I did:
You can edit the ranges, naturally, to be over two sheets.
To clarify, A$1:A$200 is the range of what you want to return (the index). C$1:C$200 is the range that holds "Fixed".
This is probably very easy for experienced user of excel, but I couldn't find a way to do this, so I asking this question.
I have particular range of cells, let's say E5:M5, only one cell of this range will contain 1, other will contain 0. I want to reference, first cell of that column (which contains label). I want to do this by using a formula in another cell. In the end, that another cell should have label name as its value.
I wanted to post image elaborating what I want, but it seems I can't do that.
Anyway, can anyone tell me how this can be done?
I'm going to assume you want to use a formula rather than VBA as it is not recommended for inexperienced Excel users to use VBA. Use this formula to determine the first column out of your set, which has "1" as a value:
=match(1,E5:M5,0)
If by 'label name' you mean you have a header or something (let's assume in row 4), you can use the index function to pull the value from the mirror set of rows above the match function, like so:
=index(E4:M4,match(1,E5:M5,0))
I would like to use a VLOOKUP function referring to a data table placed in a different sheet from the one where the VLOOKUP function in written.
Example: in Sheet 1, cell AA3 I would like to insert the VLOOKUP function.
I want the function to check the number in cell M3, find the same number in Sheet 2 range address A2:Q47 first column, and reproduce the value in the 13th column of that table.
I've written this function but it reports #N/A as a result:
=VLOOKUP(M3,Sheet1!$A$2:$Q$47,13,FALSE)
One of the common problems with VLOOKUP is "data mismatch" where #N/A is returned because a numeric lookup value doesn't match a text-formatted value in the VLOOKUP table (or vice versa)
Does either of these versions work?
=VLOOKUP(M3&"",Sheet1!$A$2:$Q$47,13,FALSE)
or
=VLOOKUP(M3+0,Sheet1!$A$2:$Q$47,13,FALSE)
The former converts a numeric lookup value to text (assuming that lookup table 1st column contains numbers formatted as text). The latter does the reverse, changing a text-formatted lookup value to a number.
Depending on which one works (assuming one does) then you may want to permanently change the format of your data so that the standard VLOOKUP will work
I faced this problem and when i started searching the important point i found is, the value u are looking up i.e M3 column should be present in the first column of the table u want to search
https://support.office.com/en-us/article/VLOOKUP-function-0bbc8083-26fe-4963-8ab8-93a18ad188a1
check in lookup_value
Your formula looks fine. Maybe the value you are looking for is not in the first column of the second table?
If the second sheet is in another workbook, you need to add a Workbook reference to your formula:
=VLOOKUP(M3,[Book1]Sheet1!$A$2:$Q$47,13,FALSE)
There might be something wrong with your formula if you are looking from another sheet maybe you have to change Sheet1 to Sheet2 ---> =VLOOKUP(M3,Sheet2!$A$2:$Q$47,13,FALSE) --- Where Sheet2 is your table array
This lookup only features exact matches. If you have an extra space in one of the columns or something similar it will not recognize it.
I have faced similar problem and it was returning #N/A. That means matching data is present but you might having extra space in the M3 column record, that may prevent it from getting exact value. Because you have set last parameter as FALSE, it is looking for "exact match".
This formula is correct: =VLOOKUP(M3,Sheet1!$A$2:$Q$47,13,FALSE)
Copy =VLOOKUP(M3,A$2:Q$47,13,FALSE) to other sheets, then search for ! replace by !$, search for : replace by :$ one time for all sheets