Given the line segment AB, how do I find the point Pn where the normal to AB passes through the point P? I also need to know if there is no normal that passes through the point (e.g. the point Q).
If R is any point on the normal line passing through P (different from P), then Pn is the point where AB and PR intersect.
One way to generate point R is to rotate segment AB by 90 degrees and then translate it so that A coincides with P. The the translated B is your R:
Rx = Px + (By - Ay)
Ry = Py - (Bx - Ax)
Once you have your point R, it becomes a simple line-line intersection problem, which will give you your Pn (the formulas can be simplified for a specific case of perpendicular lines).
Then you can easily check whether Pn lies between A and B or not.
P.S. Note that solution provided in #MBo's answer is a more direct and efficient one (and if you combine and simplify/optimize the formulas required for my answer you will eventually arrive at the same thing). What I describe above might make good sense if you already have a primitive function that calculates the intersection of two lines, say,
find_intersection(Ax, Ay, Bx, By, Cx, Cy, Dx, Dy)
// Intersect AB and CD
In that case finding Pn becomes a simple one-liner
Pn = find_intersection(Ax, Ay, Bx, By, Px, Py, Px + (By - Ay), Py - (Bx - Ax))
But if you don't have such primitive function at your disposal and/or care for making your code more efficient, then you might want to opt for a more direct dedicated sequence of calculations like the one in #MBo's answer.
Find vectors
AB = (B.X-A.X, B.Y-A.Y)
AP = (P.X-A.X, P.Y-A.Y)
Projection of P to AB is:
APn = AB * (AB.dot.AP) / (AB.dot.AB);
where .dot. is scalar product
In coordinates:
cf = ((B.X-A.X)*(P.X-A.X)+(B.Y-A.Y)*(P.Y-A.Y))/((B.X-A.X)^2+(B.Y-A.Y)^2)
if cf < 0 or cf > 1 then projection lies outside AB segment
Pn.X = A.X + (B.X-A.X) * cf
Pn.Y = A.Y + (B.Y-A.Y) * cf
Related
(Everything's in 3D) Firstly a plane is given. On this plane I'm drawing a line. The beginning and ending point of the line is given therefore. What I have to do is to use the line as the diagonal of the rectangle to create the rectangle. For this I just need the other two missing points which are also in the very same plane I've got.
How can I determine the missing two points?
In 2D for example if you have like point B (6|4) and C (1|2) then you can conclude that A is on (1|4) and D is on (6|2).
But I struggle to find a method/algorithm to do so in a 3D world.
PS: If I used the wrong tag please tell me another suggestion, thx!
To show that infinite number of rectangles with common diagonal does exist in the same plane:
You have vertices A and C, and plane normal vector n, and want to determine vertices B and D.
Let B = (bx, by, bz) (unknown)
Condition of perpendicularity of AB and BC edges: dot product of vectors is zero.
(bx-ax) * (bx-сx) + (by-ay) * (by-сy) + (bz-az) * (bz-сz) = 0
Condition of "B lies in the plane": dot product of AB and normal is zero
(bx-ax) * nx + (by-ay) * ny + (bz-az) * nz = 0
So you have two linear equations for three unknowns bx, by, bz - infinite number of solutions.
Perhaps you might have some additional condition/restriction to define solution uniquely (as axis-aligned rectangle in your 2d example)
Edit:
Arbitrary possible variant: let AB edge is parallel to OXY plane, so it is perpendicular to OZ axis, and the third equation is
(bx-ax) * 0 + (by-ay) * 0 + (bz-az) * 1 = 0, so
(bz - az) = 0
and you can substitute this expression and solve system for two unknowns bx and by
(bx-ax) * (bx-сx) + (by-ay) * (by-сy) = 0
(bx-ax) * nx + (by-ay) * ny = 0
I found this code snippet on raywenderlich.com, however the link to the explanation wasn't valid anymore. I "translated" the answer into Swift, I hope you can understand, it's actually quite easy even without knowing the language. Could anyone explain what exactly is going on here? Thanks for any help.
class func linesCross(#line1: Line, line2: Line) -> Bool {
let denominator = (line1.end.y - line1.start.y) * (line2.end.x - line2.start.x) -
(line1.end.x - line1.start.x) * (line2.end.y - line2.start.y)
if denominator == 0 { return false } //lines are parallel
let ua = ((line1.end.x - line1.start.x) * (line2.start.y - line1.start.y) -
(line1.end.y - line1.start.y) * (line2.start.x - line1.start.x)) / denominator
let ub = ((line2.end.x - line2.start.x) * (line2.start.y - line1.start.y) -
(line2.end.y - line2.start.y) * (line2.start.x - line1.start.x)) / denominator
//lines may touch each other - no test for equality here
return ua > 0 && ua < 1 && ub > 0 && ub < 1
}
You can find a detailed segment-intersection algorithm
in the book Computational Geometry in C, Sec. 7.7.
The SegSegInt code described there is available here.
I recommend avoiding slope calculations.
There are several "degenerate" cases that require care: collinear segments
overlapping or not, one segment endpoint in the interior of the other segments,
etc. I wrote the code to return an indication of these special cases.
This is what the code is doing.
Every point P in the segment AB can be described as:
P = A + u(B - A)
for some constant 0 <= u <= 1. In fact, when u=0 you get P=A, and you getP=B when u=1. Intermediate values of u will give you intermediate values of P in the segment. For instance, when u = 0.5 you will get the point in the middle. In general, you can think of the parameter u as the ratio between the lengths of AP and AB.
Now, if you have another segment CD you can describe the points Q on it in the same way, but with a different u, which I will call v:
Q = C + v(D - C)
Again, keep in mind that Q lies between C and D if, and only if, 0 <= v <= 1 (same as above for P).
To find the intersection between the two segments you have to equate P=Q. In other words, you need to find u and v, both between 0 and 1 such that:
A + u(B - A) = C + v(D - C)
So, you have this equation and you have to see if it is solvable within the given constraints on u and v.
Given that A, B, C and D are points with two coordinates x,y each, you can open the equation above into two equations:
ax + u(bx - ax) = cx + v(dx - cx)
ay + u(by - ay) = cy + v(dy - cy)
where ax = A.x, ay = A.y, etc., are the coordinates of the points.
Now we are left with a 2x2 linear system. In matrix form:
|bx-ax cx-dx| |u| = |cx-ax|
|by-ay cy-dy| |v| |cy-ay|
The determinant of the matrix is
det = (bx-ax)(cy-dy) - (by-ay)(cx-dx)
This quantity corresponds to the denominator of the code snippet (please check).
Now, multiplying both sides by the cofactor matrix:
|cy-dy dx-cx|
|ay-by bx-ax|
we get
det*u = (cy-dy)(cx-ax) + (dx-cx)(cy-ay)
det*v = (ay-by)(cx-ax) + (bx-ax)(cy-ay)
which correspond to the variables ua and ub defined in the code (check this too!)
Finally, once you have u and v you can check whether they are both between 0 and 1 and in that case return that there is intersection. Otherwise, there isn't.
For a given line the slope is
m=(y_end-y_start)/(x_end-x_start)
if two slopes are equal, the lines are parallel
m1=m1
(y1_end-y_start)/(x1_end-x1_start)=(y2_end-y2_start)/(x2_end-x2_start)
And this is equivalent to checking that the denominator is not zero,
Regarding the rest of the code, find the explanation on wikipedia under "Given two points on each line"
Could someone tell me if I've coded this correctly? This is my code for solving for the sides of a triangle given its perimeter, altitude, and angle (for the algebra see http://www.analyzemath.com/Geometry/challenge/triangle_per_alt_angle.html)
Prompt P
Prompt H
Prompt L [the angle]
(HP^2)/(2H(1+cos(L))+2Psin(L))→Y
(-P^2-2(1+cos(L))Y/(-2P)→Z
(Z+sqrt(Z^2-4Y))/2→N
[The same as above but Z-sqrt...]→R
If N>0
N→U
If R>0
R→U
Y/U→V
sqrt(U^2+V^2-2UVcos(L))→W
Disp U
Disp V
Disp W
Also, how would I fix this so that I can input angle = 90?
Also, in this code does it matter if the altitude is the one between b and c (refer to the website again)?
Thanks in advance
The code already works with L=90°.
Yes, the altitude must be the distance from point A to the base a between points B and C, forming a right-angle with that base. The derivation made that assumption, specifically with respect to the way it used h and a in the second area formula 1/2 h a. That exact formula would not apply if h was drawn differently.
The reason your second set of inputs resulted in a non-real answer is that sometimes a set of mathematical parameters can be inconsistent with each other and describe an impossible construct, and your P, h, and L values do exactly that. Specifically, they describe an impossible triangle.
Given an altitude h and angle L, the smallest perimeter P that can be achieved is an isosceles triangle split down the middle by h. With L=30, this would have perimeter P = a + b + c = 2h tan15 + h/cos15 + h/cos15, which, plugging in your h=3, results in P=7.819. You instead tried to use P=3+sqrt(3)=4.732. Try using various numbers less than 7.819 (plus a little; I've rounded here) and you'll see they all result in imaginary results. That's math telling you you're calculating something that cannot exist in reality.
If you fill in the missing close parenthesis between the Y and the / in line 5, then your code works perfectly.
I wrote the code slightly differently from you, here's what I did:
Prompt P
Prompt H
Prompt L
HP²/(2H(1+cos(L))+2Psin(L))→Y
(HP-Ysin(L))/H→Z
Z²-4Y→D
If D<0:Then
Disp "IMAGINARY"
Stop
End
(Z+√(D))/2→C
Y/C→B
P-(B+C)→A
Disp A
Disp B
Disp C
Edit: #Gabriel, there's nothing special (with respect to this question) about the angles 30-60-90; there is an infinite number of sets of P, h, and L inputs that describe such triangles. However, if you actually want to arrive at such triangles in the answer, you've actually changed the question; instead of just knowing one angle L plus P and h, you now know three angles (30-60-90) plus P and h. You've now over-specified the triangle, so that it is pretty well certain that a randomly generated set of inputs will describe an impossible triangle. As a contrived example, if you specified h as 0.0001 and P as 99999, then that's clearly impossible, because a triangle with a tiny altitude and fairly unextreme angles (which 30-60-90 are) cannot possibly achieve a perimeter many times its altitude.
If you want to start with just one of P or h, then you can derive equations to calculate all parameters of the triangle from the known P or h plus the knowledge of the 30-60-90 angles.
To give one example of this, if we assume that side a forms the base of the triangle between the 90° and 60° angles, then we have L=30 and (labelling the 60° angle as B) we have h=b, and you can get simple equations for all parameters:
P = a + h + c
sin60 = h/c
cos60 = a/c
=> P = c cos60 + c sin60 + c
P = c(cos60 + sin60 + 1)
c = P/(cos60 + sin60 + 1)
b = h = c sin60
a = c cos60
Plugging in P=100 we have
c = 100/(cos60 + sin60 + 1) = 42.265
b = h = 36.603
a = 21.132
If you plug in P=100, h=36.603, and L=30 into the code, you'll see you get these exact results.
Always optimize for speed, then size.
Further optimizing bgoldst's code:
Prompt P,H,L
HP²/(2H(1+cos(L))+2Psin(L
.5(Z+√((HP-sin(L)Ans)/H)²-4Ans
{Y/C→B,P-B-Ans,Ans
I've got a shape consisting of four points, A, B, C and D, of which the only their position is known. The goal is to transform these points to have specific angles and offsets relative to each other.
For example: A(-1,-1) B(2,-1) C(1,1) D(-2,1), which should be transformed to a perfect square (all angles 90) with offsets between AB, BC, CD and AD all being 2. The result should be a square slightly rotated counter-clockwise.
What would be the most efficient way to do this?
I'm using this for a simple block simulation program.
As Mark alluded, we can use constrained optimization to find the side 2 square that minimizes the square of the distance to the corners of the original.
We need to minimize f = (a-A)^2 + (b-B)^2 + (c-C)^2 + (d-D)^2 (where the square is actually a dot product of the vector argument with itself) subject to some constraints.
Following the method of Lagrange multipliers, I chose the following distance constraints:
g1 = (a-b)^2 - 4
g2 = (c-b)^2 - 4
g3 = (d-c)^2 - 4
and the following angle constraints:
g4 = (b-a).(c-b)
g5 = (c-b).(d-c)
A quick napkin sketch should convince you that these constraints are sufficient.
We then want to minimize f subject to the g's all being zero.
The Lagrange function is:
L = f + Sum(i = 1 to 5, li gi)
where the lis are the Lagrange multipliers.
The gradient is non-linear, so we have to take a hessian and use multivariate Newton's method to iterate to a solution.
Here's the solution I got (red) for the data given (black):
This took 5 iterations, after which the L2 norm of the step was 6.5106e-9.
While Codie CodeMonkey's solution is a perfectly valid one (and a great use case for the Lagrangian Multipliers at that), I believe that it's worth mentioning that if the side length is not given this particular problem actually has a closed form solution.
We would like to minimise the distance between the corners of our fitted square and the ones of the given quadrilateral. This is equivalent to minimising the cost function:
f(x1,...,y4) = (x1-ax)^2+(y1-ay)^2 + (x2-bx)^2+(y2-by)^2 +
(x3-cx)^2+(y3-cy)^2 + (x4-dx)^2+(y4-dy)^2
Where Pi = (xi,yi) are the corners of the fitted square and A = (ax,ay) through D = (dx,dy) represent the given corners of the quadrilateral in clockwise order. Since we are fitting a square we have certain contraints regarding the positions of the four corners. Actually, if two opposite corners are given, they are enough to describe a unique square (save for the mirror image on the diagonal).
Parametrization of the points
This means that two opposite corners are enough to represent our target square. We can parametrise the two remaining corners using the components of the first two. In the above example we express P2 and P4 in terms of P1 = (x1,y1) and P3 = (x3,y3). If you need a visualisation of the geometrical intuition behind the parametrisation of a square you can play with the interactive version.
P2 = (x2,y2) = ( (x1+x3-y3+y1)/2 , (y1+y3-x1+x3)/2 )
P4 = (x4,y4) = ( (x1+x3+y3-y1)/2 , (y1+y3+x1-x3)/2 )
Substituting for x2,x4,y2,y4 means that f(x1,...,y4) can be rewritten to:
f(x1,x3,y1,y3) = (x1-ax)^2+(y1-ay)^2 + ((x1+x3-y3+y1)/2-bx)^2+((y1+y3-x1+x3)/2-by)^2 +
(x3-cx)^2+(y3-cy)^2 + ((x1+x3+y3-y1)/2-dx)^2+((y1+y3+x1-x3)/2-dy)^2
a function which only depends on x1,x3,y1,y3. To find the minimum of the resulting function we then set the partial derivatives of f(x1,x3,y1,y3) equal to zero. They are the following:
df/dx1 = 4x1-dy-dx+by-bx-2ax = 0 --> x1 = ( dy+dx-by+bx+2ax)/4
df/dx3 = 4x3+dy-dx-by-bx-2cx = 0 --> x3 = (-dy+dx+by+bx+2cx)/4
df/dy1 = 4y1-dy+dx-by-bx-2ay = 0 --> y1 = ( dy-dx+by+bx+2ay)/4
df/dy3 = 4y3-dy-dx-2cy-by+bx = 0 --> y3 = ( dy+dx+by-bx+2cy)/4
You may see where this is going, as simple rearrangment of the terms leads to the final solution.
Final solution
Given two image buffers (assume it's an array of ints of size width * height, with each element a color value), how can I map an area defined by a quadrilateral from one image buffer into the other (always square) image buffer? I'm led to understand this is called "projective transformation".
I'm also looking for a general (not language- or library-specific) way of doing this, such that it could be reasonably applied in any language without relying on "magic function X that does all the work for me".
An example: I've written a short program in Java using the Processing library (processing.org) that captures video from a camera. During an initial "calibrating" step, the captured video is output directly into a window. The user then clicks on four points to define an area of the video that will be transformed, then mapped into the square window during subsequent operation of the program. If the user were to click on the four points defining the corners of a door visible at an angle in the camera's output, then this transformation would cause the subsequent video to map the transformed image of the door to the entire area of the window, albeit somewhat distorted.
Using linear algebra is much easier than all that geometry! Plus you won't need to use sine, cosine, etc, so you can store each number as a rational fraction and get the exact numerical result if you need it.
What you want is a mapping from your old (x,y) co-ordinates to your new (x',y') co-ordinates. You can do it with matrices. You need to find the 2-by-4 projection matrix P such that P times the old coordinates equals the new co-ordinates. We'll assume that you're mapping lines to lines (not, for instance, straight lines to parabolas). Because you have a projection (parallel lines don't stay parallel) and translation (sliding), you need a factor of (xy) and (1), too. Drawn as matrices:
[x ]
[a b c d]*[y ] = [x']
[e f g h] [x*y] [y']
[1 ]
You need to know a through h so solve these equations:
a*x_0 + b*y_0 + c*x_0*y_0 + d = i_0
a*x_1 + b*y_1 + c*x_1*y_1 + d = i_1
a*x_2 + b*y_2 + c*x_2*y_2 + d = i_2
a*x_3 + b*y_3 + c*x_3*y_3 + d = i_3
e*x_0 + f*y_0 + g*x_0*y_0 + h = j_0
e*x_1 + f*y_1 + g*x_1*y_1 + h = j_1
e*x_2 + f*y_2 + g*x_2*y_2 + h = j_2
e*x_3 + f*y_3 + g*x_3*y_3 + h = j_3
Again, you can use linear algebra:
[x_0 y_0 x_0*y_0 1] [a e] [i_0 j_0]
[x_1 y_1 x_1*y_1 1] * [b f] = [i_1 j_1]
[x_2 y_2 x_2*y_2 1] [c g] [i_2 j_2]
[x_3 y_3 x_3*y_3 1] [d h] [i_3 j_3]
Plug in your corners for x_n,y_n,i_n,j_n. (Corners work best because they are far apart to decrease the error if you're picking the points from, say, user-clicks.) Take the inverse of the 4x4 matrix and multiply it by the right side of the equation. The transpose of that matrix is P. You should be able to find functions to compute a matrix inverse and multiply online.
Where you'll probably have bugs:
When computing, remember to check for division by zero. That's a sign that your matrix is not invertible. That might happen if you try to map one (x,y) co-ordinate to two different points.
If you write your own matrix math, remember that matrices are usually specified row,column (vertical,horizontal) and screen graphics are x,y (horizontal,vertical). You're bound to get something wrong the first time.
EDIT
The assumption below of the invariance of angle ratios is incorrect. Projective transformations instead preserve cross-ratios and incidence. A solution then is:
Find the point C' at the intersection of the lines defined by the segments AD and CP.
Find the point B' at the intersection of the lines defined by the segments AD and BP.
Determine the cross-ratio of B'DAC', i.e. r = (BA' * DC') / (DA * B'C').
Construct the projected line F'HEG'. The cross-ratio of these points is equal to r, i.e. r = (F'E * HG') / (HE * F'G').
F'F and G'G will intersect at the projected point Q so equating the cross-ratios and knowing the length of the side of the square you can determine the position of Q with some arithmetic gymnastics.
Hmmmm....I'll take a stab at this one. This solution relies on the assumption that ratios of angles are preserved in the transformation. See the image for guidance (sorry for the poor image quality...it's REALLY late). The algorithm only provides the mapping of a point in the quadrilateral to a point in the square. You would still need to implement dealing with multiple quad points being mapped to the same square point.
Let ABCD be a quadrilateral where A is the top-left vertex, B is the top-right vertex, C is the bottom-right vertex and D is the bottom-left vertex. The pair (xA, yA) represent the x and y coordinates of the vertex A. We are mapping points in this quadrilateral to the square EFGH whose side has length equal to m.
Compute the lengths AD, CD, AC, BD and BC:
AD = sqrt((xA-xD)^2 + (yA-yD)^2)
CD = sqrt((xC-xD)^2 + (yC-yD)^2)
AC = sqrt((xA-xC)^2 + (yA-yC)^2)
BD = sqrt((xB-xD)^2 + (yB-yD)^2)
BC = sqrt((xB-xC)^2 + (yB-yC)^2)
Let thetaD be the angle at the vertex D and thetaC be the angle at the vertex C. Compute these angles using the cosine law:
thetaD = arccos((AD^2 + CD^2 - AC^2) / (2*AD*CD))
thetaC = arccos((BC^2 + CD^2 - BD^2) / (2*BC*CD))
We map each point P in the quadrilateral to a point Q in the square. For each point P in the quadrilateral, do the following:
Find the distance DP:
DP = sqrt((xP-xD)^2 + (yP-yD)^2)
Find the distance CP:
CP = sqrt((xP-xC)^2 + (yP-yC)^2)
Find the angle thetaP1 between CD and DP:
thetaP1 = arccos((DP^2 + CD^2 - CP^2) / (2*DP*CD))
Find the angle thetaP2 between CD and CP:
thetaP2 = arccos((CP^2 + CD^2 - DP^2) / (2*CP*CD))
The ratio of thetaP1 to thetaD should be the ratio of thetaQ1 to 90. Therefore, calculate thetaQ1:
thetaQ1 = thetaP1 * 90 / thetaD
Similarly, calculate thetaQ2:
thetaQ2 = thetaP2 * 90 / thetaC
Find the distance HQ:
HQ = m * sin(thetaQ2) / sin(180-thetaQ1-thetaQ2)
Finally, the x and y position of Q relative to the bottom-left corner of EFGH is:
x = HQ * cos(thetaQ1)
y = HQ * sin(thetaQ1)
You would have to keep track of how many colour values get mapped to each point in the square so that you can calculate an average colour for each of those points.
I think what you're after is a planar homography, have a look at these lecture notes:
http://www.cs.utoronto.ca/~strider/vis-notes/tutHomography04.pdf
If you scroll down to the end you'll see an example of just what you're describing. I expect there's a function in the Intel OpenCV library which will do just this.
There is a C++ project on CodeProject that includes source for projective transformations of bitmaps. The maths are on Wikipedia here. Note that so far as i know, a projective transformation will not map any arbitrary quadrilateral onto another, but will do so for triangles, you may also want to look up skewing transforms.
If this transformation has to look good (as opposed to the way a bitmap looks if you resize it in Paint), you can't just create a formula that maps destination pixels to source pixels. Values in the destination buffer have to be based on a complex averaging of nearby source pixels or else the results will be highly pixelated.
So unless you want to get into some complex coding, use someone else's magic function, as smacl and Ian have suggested.
Here's how would do it in principle:
map the origin of A to the origin of B via a traslation vector t.
take unit vectors of A (1,0) and (0,1) and calculate how they would be mapped onto the unit vectors of B.
this gives you a transformation matrix M so that every vector a in A maps to M a + t
invert the matrix and negate the traslation vector so for every vector b in B you have the inverse mapping b -> M-1 (b - t)
once you have this transformation, for each point in the target area in B, find the corresponding in A and copy.
The advantage of this mapping is that you only calculate the points you need, i.e. you loop on the target points, not the source points. It was a widely used technique in the "demo coding" scene a few years back.