I am using this code:
=IIF(RunningValue(Fields!cost_center_id.Value, CountDistinct, nothing) Mod 2, "White", "Gainsboro")
But its result is not good. I think it's because of Fields!cost_center_id.Value. Can anybody tell me the most appropriate code?
And why the footer (Total) has also shade thought I haven't put code in it? Help me.
Thanks in advance.
Screenshots:
I used this code for the 3rd picture.
= IIF(RowNumber("LCSRDBDataSet_CostCenterSummary") Mod 2 = 0, "White", "Gainsboro")
The reason your expression doesn't work is because your id values might have gaps or not be ordered correctly.
One of these following expressions should give the wanted behavior.
= IIF(RowNumber(Nothing) Mod 2 = 0, "White", "Gainsboro")
= IIF(RowNumber("YourDataSet") Mod 2 = 0, "White", "Gainsboro")
You need to define the expression for the BackgroundColorproperty of the data row. The footer row (total) should be below the data row, and thus have no expression for it's background color, unless you want it to be different to the final row.
Related
I have a building a set of stencil shapes and I need the text to display below the shape. I am using custom formulas to generate the text, and as such the volume of text changes from use case to use case.
What I have come across is using the Text Transform set of properties, and I have tried the following with success for a single line of text:
TxtWidth = TEXTWIDTH(TheText)
TxtPinX = Width * 0.5
TxtLocPinX = TxtWidth * 0.5
TxtHeight = Height * 0
TxtPinY = Height * -0.2
TxtLocPinY = TxtHieght * 0.5
TxtAngle = 0 deg
The problem arises when there is more than a single line of text to display -> the text appears 'half above (inside) and half below' the bottom the shape.
I would like to place all the text, regardless of how many lines there are, underneath the shape.
What I have tried is to set the TxtPinY = some formula different from above eg/ Height * -(TxtHeight). This seems to always result in an 'error in formula'.
I am sure that this is something simple that I am missing, but I cannot figure it out.
Can anybody point me in the right direction?
Cheers and thanks for taking a look at this,
The Frog
You could try the TEXTHEIGHT function to get around this. Specify a reasonable maximum text widht as a second parameter for it:
TxtHeight = TEXTHEIGHT(TheText,100)
TxtPinY = 0
TxtLocPinY = TxtHeight
You can use the code provided with the stencil available in this post:
http://visguy.com/vgforum/index.php?topic=7461.msg31490#msg31490
So column width is done using cell width on all cells in one column ike this:
from docx import Document
from docx.shared import Cm
file = /path/to/file/
doc = Document(file)
table = doc.add_table(4,2)
for cell in table.columns[0].cells:
cell.width = Cm(1.85)
however, the row height is done using rows, but I can't remember how I did it last week.
Now I managed to find a way to reference the rows in a table, but can't seem to get back to that way. It is possible to change the height by using the add_row method, but you can't create a table with no rows, so the the top row will always be the default height, which about 1.6cms.
There is a way to access paragraphs without using add_paragraph, does anyone know how to access the rows without using the add_row method because it was that that I used to set row height in a table as a default.
I have tried this but it doesn't work:
row = table.rows
row.height = Cm(0.7)
but although this does not give an error, it also has no effect on the height.
table.rows is a collection, in particular a sequence, so you need to access each row separately:
for row in table.rows:
row.height = Cm(0.7)
Also check out row.height_rule for some related behaviors you have access to:
https://python-docx.readthedocs.io/en/latest/api/table.html#row-objects
When you assign to table.rows.height, it just adds a .height instance attribute that does nothing. It's one of the side-effects of a dynamic language like Python that you encounter a mysterious behavior like this. It goes away as you gain more experience though, at least it has for me :)
Some additional information:
The answer here is correct, but this will give a minimum row height. Using WD_ROW_HEIGHT_RULE.EXACTLY will fix the cell height to the set row height ignoring the contents of the cell, this can result in cropping of the text in an undesirable way.
para = table.cell(0,0).add_paragrph('some text')
SOLUTION:
add_paragraph actually adds a blank line above the text.
Use the following instead to avoid using add_paragraph:
table.cell(0,0).paragraphs[0].text = 'some text'
or using add_run can make it easier to also work with the text:
run = table.cell(0,0).paragraphs[0].add_run('some text')
run.bold = True
Ok, so I'm trying to use gscatter to plot 8 different points in a figure. These 8 points are all different and thus I want to give them different symbols. I know that gscatter will automatically assign them different colors, but I also want to be able to use the figure in black and white. I have written the following code:
lincol = {'k';'k';'k';'k';'k';'k';'k';'k'};
linsym = {'+';'o';'*';'.';'x';'s';'d';'^'};
limits = [-1 1 -1 1];
close all
for i = 1:3;
figure(i); hold on
gscatter(RfootXdistpertRel(:,i),RfootYdistpertRel(:,i),lincol,linsym);
legend('Pert1', 'Pert2', 'Pert3', 'Pert4', 'Pert5', 'Pert6', 'Pert7', 'Pert8')
hline(0);
vline(0);
axis(limits);
end
According to the matlab syntax, I should be able to specify color and marker symbol in this way (gscatter(x,y,col,sym)). The variables used are 8 by 1 vectors, just as the lincol and linsym. However, it gives me an error:
Error using plot
Color value must be a 3 or 4 element vector
Can anyone help? It's just such a silly problem to have.
Luc
It seems that you have some errors in your code. The syntax for gscatter should include at least 3 parameters : x, y and group. It seems that group is missing.
Furthermore the definition of color and sym may be wrong. Try col = 'kkkkkkkk'; instead of lincol = {'k';'k';'k';'k';'k';'k';'k';'k'};.
I hope this helps.
Regards.
Jonay
I have been trying to work with textplot in R and am unsure if my question is possible or not, I know that par() can't be used to place two textplots in one plot. I have been using a page and this code to try and figure things out.
My question is: Is it possible to have two textplots within the same plot?
For example, in the par(mfrow=c(1,1)) scenario below, plot 1 is a texplot of species length. Say I wanted to replicate that textplot twice in that plot. Is that possible?
based on this site:
http://svitsrv25.epfl.ch/R-doc/library/gplots/html/textplot.html
textplot(version)
data(iris)
par(mfrow=c(1,1))
info <- sapply( split(iris$Sepal.Length, iris$Species),
function(x) round(c(Mean=mean(x), SD=sd(x), N=gdata::nobs(x)),2) )
textplot( info, valign="top" )
title("Sepal Length by Species")
What I want to do is put a second textplot within that plot, underneath the original. For arguments sake, replicating that textplot twice in the plot.
Is this possible?
Thanks!
Maybe you've figured it out in the last four months but I thought I'd chip in an answer anyway.
The code provided is most of the way towards doing what you require already, you just have to provide some additional inputs to title() and/or par(). Namely specify that the title is to be above both of the plots by using title("your title", outer = TRUE) and you can further adjust the position of the title with an option in par(), use par(mfrow = c(2,1), oma = c(0,0,"top",0)). Hopefully this answers your question.
require('gplots')
data(iris)
info <- sapply(split(iris$Sepal.Length, iris$Species),
function(x) round(c(Mean = mean(x), SD = sd(x), N = gdata::nobs(x)),2))
## Replace top with a numerical value to control the position of the title with respect to the
## top of the page.
par(mfrow = c(2,1), oma = c(0,0, top ,0))
textplot(info, valign = "top")
textplot(info, valign = "top")
title("Sepal Length by Species", outer = TRUE)
I want to show a circle around only invalid data.
i have done the complete steps shown in this link
But this circle shown is very big and covers the entire cell.
I want a small circle only covering the data not the entire cell's width.
Data validation is a built in Excel functionality. It checks whole cell value.
So it is not possible, using Data validation, to accomplish what your trying.
It MAY BE POSSIBLE using VBA, shapes, events and (hard) parsing character rendering. In your place, I would be glad with this very big circles!!! :)
I agree with #LS_dev. See this MS Article about changing data validation for printing. Try modifying it to loop through all your data validation and change the width and height.
You can probably do it with this part of the code by changing the width and height:
If Not c.Validation.Value Then
Set o = ActiveSheet.Shapes.AddShape(msoShapeOval, _
c.Left - 2, c.Top - 2, c.Width + 4, c.Height + 4)
o.Fill.Visible = msoFalse
o.Line.ForeColor.SchemeColor = 10
o.Line.Weight = 1.25