I've built a command line using Nodejs, I was developing it on windows, than after I published it on npm, I installed it from Ubuntu, then I tried to use it, it says that there is no such file.
I'm not sure of what is the problem, I have doubt that it's from this line :
#!/usr/bin/env node
I also tried to clone the repo from ubuntu, and I run the command
npm link
and it worked ! can someone please tell me what did I do wrong ?
Here is the whole repo on github and the package on npm
Related
What is npm?
Whenever I browse through some project they ask me to run npm command, something like this
npm install -g node-windows
I went through some blog posts to learn about npm and I installed Node.js. However, when I run the above code in Node.js, I get the following errors:
When I browsed further, I came to know that the windows user can run the command from the cmd prompt window, but when I do that I get some output like this:
Which just generate a text file nothing else.
My questions:
How can I get started with the AngularJS2?
How can I run an npm command?
Do I require a command prompt to run the npm command (in Windows), or I can just use Node.js?
When I use the command npm install in my command prompt, I get the following output:
How to get started with the angularJS2
Follow this link and set up the project by following instructions
How to run a npm command
npm stands for Node Package Manager, and therefore you need Node.js installed before you can run npm commands.
Follow this and install the latest version. And restart the command prompt.
Do I require a command prompt to run npm commands (in Windows), or can I just use Node.js?
Yes, you need to run npm commands from the command line (in Windows).
E.g., npm install
You get the warning because there is no package.json file present where you are running the command.
ENOENT stands for Error NO ENTrey
Navigate to the project folder using the following command and then run npm install
cd <projectpath>
The AngularJS 2 website has everything you need to be covered. Their quickstart guide alongside with the quickseed zip file helps a lot.
But, in case you missed some points:
yes, you will need npm/NodeJS. So, download the latest distribution and have a clean installation of it.
you can execute the npm command with its parameters from within the Windows cmd.
the quickseed ZIP file contains all the files you need to see a live and quick example running locally. Unzip it on your workplace and navigate to it using the windows cmd. When inside the root folder of the unzipped package, execute npm install and right after it npm start.
Take the learning path. Step by step, all your questions will be answered.
You need to use an admin prompt for global installation (-g).
When we install Bower or Grunt via npm, we can use the bower or grunt command line tool. Looking inside, it seems to have generated a .cmd file for Windows and (probably, because I haven't looked into it) a .bach file for Unix based system.
I looked at the source code in Github, but haven't got a clue. How does those npm projects generate the cmd batch file which supports both kind of OSes?
Are you looking for this repo ?
https://github.com/ForbesLindesay/cmd-shim
I recently decided to pick up Node on my personal laptop, which I upgraded to Windows 10, and the Node cli seems to hang when I try to run it.
Simply typing node on the console will not initiate the interface, and to do anything else I need to Ctrl+C out of it.
Additionally, running some npm commands take longer than they used to on my laptop. More noticeably, npm init seems to hang after confirming the information to be written to package.json.
Node version is 4.0.0
npm version is 2.14.2
Are there any known issues with Node and npm on Windows 10?
Edit:
After some troubleshooting, I've figured out the error only happens on Msysgit. Neither of the issues happen on the standard command prompt of Windows.
I had the same issue on Windows 7 with Node version 6.11.0 and Msysgit's MINGW64 terminal window.
The problem was caused by the an alias provided by Msysgit as demonstrated below:
$ alias node
alias node='winpty node.exe'
The solution is to run the command:
$ unalias node
Then node will run correctly.
You can add the unalias node command into your .bashrc file in your HOME directory to make this permanent.
Good luck!
Jeff
https://github.com/tejas-manohar/itnerary-civic-hacking -- I cloned this git repo down locally. Installed grunt-cli globally, and ran npm run nss (script written by author of original server template -- look in package.json, not complex) and faced numerous errors at the traceur install + git cloning. I've included the trail from terminal window in the pastebin linked below. The npm debug/error log mentioned is not present at the suggested location. npm install alone does not help the situation and returns nothing back. NodeJS v0.10.29 is installed via Node Version Manager (NVM) on OS X 10.9.3.
http://pastebin.com/UJFL3k2E
I'm not the most adept with some of the technologies discussed here. Would someone please attempt to walk me through (a) solution(s) and/or steps to get better clues? All assistance is appreciated.
There's a couple of problems going on which are causing the problems you have seen. The first of which is the command that is run when you run npm run nss, which fails for you with this:
rm: ../../app/static/js/vendor/traceur.js: No such file or directory
This is because, well, the file simply does not exist (yet). If you look at the commands which are run when you run npm run nss, you'll see that the remove file is followed by the copy file of traceur.js to that very location. So I would guess that whoever wrote the script intended for this to be run after it was initially setup, and the remove/copy would be done once the file was initially copied there. Therefore, you must first copy the traceur.js file to app/static/js/vendor before you can successfully execute npm run nss.
But then the next problem, the file should be copied from tools/traceur-compiler/bin doesn't exist either. This is because the traceur-compiler project has recently deleted this (compiled) file from their project, which you can see via this commit: https://github.com/google/traceur-compiler/commit/429c3d850dcb7636320e81fd782c61a06de0fbf1
So you need to regenerate this file, which you can do by (from the itnerary-civic-hacking root directory):
cd tools/traceur-compiler
make bin/traceur.js
cp bin/traceur.js ../../app/static/js/vendor
This will get you in the same state as if you successfully ran npm run nss.
You won't be able to re-run the npm run nss command, but you really shouldn't need to since its more of a setup command than anything (it creates a directory, clones a github repo, etc). If you wanted to update the traceur-compiler in the future (though you may never have to do this) then I would recommend running the following steps (from the itnerary-civic-hacking root directory):
cd tools/traceur-compiler
git pull origin master
npm install
make bin/traceur.js
cp bin/traceur.js ../../app/static/js/vendor
Hi Stackoverflow community,
Well the thing is that I'm working on a script for hubot. Before starting to code I'm trying to test some hubot commands in the command line (I already did it in Windows but for some reasons I've to change to Ubuntu environment to start to code this brand new custom hubot) I'd like to be able to write in the terminal >Hubot PING and get a response PONG to start to work.
Till now I've already installed Node.js through nodenv https://github.com/OiNutter/nodenv and I tested my node >node -v, got v0.10.22. I forked my hubot and cloned locally and then apply ~./hubot> npm install to get all the dependencies and everything seems OK. Then I went to the installation folder >cd node_modules/hosted-hubot which has a folder called bin, inside the hubot folder.
So, till this point everything seemed OK and I tried to do in the command line: ./bin/hubot and I'm not able to run hubot locally, it gave me: nodenv: version `v0.8' is not installed. I tried to install an older version of node 0.8 and got the same message.
So that's it, hope you guys can help me to try to test my hubot locally
Thanks in advance!!!
I made a fresh install and I instal node.js without nodenv and everything works properly. It may not be the better solution but it was what I did.