I know this may be a long shot targeting those here on stackoverflow who use oxwall software to help me with my question, but sadly, I've tried all other sources - even the oxwall forums but to no avail.
For starters - here is what I have so far:
I'm currently running Windows 10 as my OS
I have XAMPP installed
Control panel Apache and MySQL are activated or started/running
Using Localhost:100 instead of Localhost:80 due to conflicts with other applications
User: root with password left blank or empty
I have the Oxwall software - version 1.8.0 within my htdocs folder
I have a database setup using mysql with it's current port set to 3306
My issue:
When installing the oxwall software and get to the third section in the installation process, I am unable to proceed due to setting up a cron job incorrectly.
Due to the fact that I'm running on a localhost with my port as 100 - on a windows machine, using xampp - I'm pretty much clueless on how to get this cron job working correctly and/or even setup for that matter.
I've read literally all the topics that were discussed on the oxwall forums and even followed their documentation but still nothing.
The error I get is this:
ow_includes/config.php file is incorrect. Update it with details provided below.
However, the only details given states:
• Create a cron job that runs ow_cron/run.php once a minute. (?) - with the question mark directing me to the oxwall documentation of how to setup a cron job. But that doesn't seem to work...
I'm literally at a loss here, I've tried to create a .bat file and created a task schedule but nothing...
Even if there is nobody here that uses Oxwall, I'm hoping this can still be answered.
Any help is greatly appreciated!
I received the same error message when using using Oxwall 1.8.1 on my own VPS with CentOS 7, PHP 5.5.31 and mariaDB 5.5.44.
I noticed that the DB only contained one table because my DB user does not have 'Lock table' rights. Once I added these rights to my DB user for Oxwall DB, removed the table and continued the installation, all tables were created and installation was successful.
Related
After upgrading system to Windows 10 - os 1803 we are getting below issues while working with ClearCase 8.0.1.x/9.0.1.x
Unable to checkin/checkout.
Not able to create views.
Not able to add any file to source control.
The system hangs & crashes while performing any ClearCase operation.
There is no error message, but I have attached screenshot for reference.
Please let us know if there is any issue with the Windows 10 ver(1803), any security system enabled?
Or has ClearCase provided any fix?
We have tried 9.0.1.5 and issue still persists.
This is what we got from windows event log.
The computer has rebooted from a bugcheck.
The bugcheck was:
0x000000c2 (0x0000000000000004, 0x00000000535be990, 0x000000000004efd3, 0xfffff803e01848b1)
for most of them whoever has upgraded to windows 1803 ver :( for people who are still using ver1709 it is working perfectly fine
Then I would recommand contacting IBM support: only them can update their ClearCase 9/Windows 10 compatibility matrix and confirm if MVFS is supported on a more recent (1803) Windows 10 edition.
We also facing same problem and I have raised the case with IBM. Still not yet resolved. As IBM said there are some limitations to work ClearCase with windows 10 and windows 2016.
We tried all the options except Secure boot disable. If possible please do disable secure boot option in Windows 10 and try to checkin/checkout code from CleraCase
Note : It works for Snapshot views. That means the issue related to MVFS
I'm seconding #VonC's recommendation to open a ticket with IBM. When you do that, save a step and collect a clearbug2 and a kernel memory dump to send in as soon as the case is opened. It will save the turn-around time of us asking you for it. If the installed programs list doesn't list installed security software (DLP, Privilege management sw like Avecto, other endpoint security tools), please list those separately as well.
I would also love to know who # IBM told you there are "limitations" with Win10-1803.
There are a few issues with Windows 10 "version upgrades" breaking things, but they generally don't cause system crashes. Windows 10 upgrades are actually full OS installs that then (imperfectly) migrate application settings. Anything that uses custom network providers (ClearCase is one example) will find that the network providers will be broken or partially broken. Reinstalling is usually required. Again, that has not yet been reported as a cause of a BSOD.
If the upgrade/reinstall didn't fix view creation, please post a separate question on the view creation issue. There may be things we can do to the SMB 2 caches to allow view creation to work in cases where the view storage is not on the client host.
I noticed that the screen shot you posted is a Terminal Services disconnect screenshot. Does the issue only occur over a Terminal Services client connection or does it also happen on a local connection?
I am new to Linux command line and setting up Magento 2.1 on my VPS. I am thinking to setup Nagios on subdomain so i don't want any interruption on my actual domain ecommerce application.
I have few doubts which causing lot of trouble to me.
By default Zpanel comes up with lower config for Php and Mysql and to make them work with Magento 2 i have to manually upgrade them . I did that but Magento worked, whole Zpanel navigation stopped working. So i re-installed whole ubuntu Os again and ready with my box. I would also like to have Varnish Cache along with some web based console so that i can easily manage my virtual hosts and for some other stuff.
What will be the best approach to setup everything one by one on one domain/sub-domain? I have found so many articles to install magento 2 on ubuntu using command line but they dont use any webpanel. I am open to switch it to any other OS as well.
If there is sequence to setup these all, please guide.
Final Requirement:
Magento 2 with any Linux OS
Nagios server for monitoring
Web panel like CWP or Zpanel etc.
This question will be complete solution and will helpful many other users as well. All answers are highly appreciated. Thank you all in advance.
Regards
H
Hello "stackers" i've been trying the past few days to set-up TCadmin GamePanel on my CentOS server.
We're running CentOS 64 bit, with 32 lib installed.
-We can create Murmur/counter-strike: Source servers running without problems.
-Other servers not responding to query.
-we've allowed port range 27015 - 27030
-SteamCMD is running and we can connect to steam API (tried via. the server)
Following folder names are with lowercases:
/home/tcagame/user
/home/tcadmin/tcafiles/games
/home/tcadmin/tcafiles/users
So after what my research lead to. It isn't because of uppercase letters.
We've tried to reinstall the entire server but nothing works.
Does anybody know why this is happening?
(if some info are missing i'll provide them to you)
Best regards
Rune
Update:
TCadmin support responded to our ticket:
Bu default Tcadmin Runs the "srcds.exe"
This is not the right file to run
Cilck on the server, choose service settings and change "srcds.exe" to "srcds_run"
My coworker installed Linux Mint 14 Nadia onto a VM (using VirtualBox) and followed the following tutorial to install Apache, MySQL and PHP: http://community.linuxmint.com/tutorial/view/486. He then used the readme from http://www.bestpractical.com/rt/docs/4.0/ to install Request Tracker 4.0. Both of those went pretty well with very few hiccups along the way from what he told me. Now he's forwarded over the task to me and I'm attempting to get Request Tracker 4.0 configured correctly with the Apache server. Currently I can visit localhost and get the following message:
It works! This is the default web page for this server. The web server
software is running but no content has been added, yet.
I also configured it so when you visit localhost/rt you SHOULD see the Request Tracker interface, but I'm instead receiving the following page, and this is where I've spent most of my time stumped:
You're almost there! You haven't yet configured your webserver to run
RT. You appear to have installed RT's web interface correctly, but
haven't yet configured your web server to "run" the RT server which
powers the web interface. The next step is to edit your webserver's
configuration file to instruct it to use RT's mod_perl or FastCGI
handler. If you need commercial support, please contact us at
sales#bestpractical.com.
After a few moments it redirects me to bestpractical.com/rt/rt-broken-install.html. (only allowed 2 links apparently?)
I assume I have something misconfigured but am unsure what. I've been googling and fiddling around with this most of yesterday and today with no luck. It doesn't help that I'm fairly inexperienced with the linux environment, I'm sure.
If I understand how he installed it, he wants to set it up using FastCGI so I visited this site requesttracker.wikia.com/wiki/FastCGI and followed the guides there, but the documentation is quite awful and doesn't always line up with my environment, so I've had to put in a lot of guess and check work. I'll provide the code I've added to my config files so you see where I'm at for now
000-default in /etc/apache2/sites-enabled:
Alias /rt /opt/rt4/share/html
Alias /NoAuth/images /var/www/rt/share/html/NoAuth/images/
AddHandler fastcgi-script fcgi
ScriptAlias / /var/www/rt/sbin/rt-server.fcgi/
<Directory /opt/rt4/share/html/>
Order allow,deny
Allow from all
</Directory>
RT_SiteConfig.pm in /opt/rt4/etc:
Set($WebPath, '/rt');
Set($WebBaseURL, 'http://localhost');
If anymore information is needed, please let me know. Thanks in advance for any help!
The RT docs for web deployment give more detailed info for setting up Apache with fastcgi and for running at '/rt'. I think you'll want to initially try using the suggested Apache configurations and see if that gets you past the setup page.
(Note that those docs are available in the RT install as well in the docs directory.)
I'm a newbie in the open source world. Always used to paying i can't imagine we can get a whole OS for free!!! None the less from reputed companies like Oracle, i'm sold! OK so i got Oracle Linux server 6.1 installed and its running fine. I also checked all the boxes under webserver and MySQl during installation and i can see the Apache home page when i type localhost on the browser and i have started both the Apache & the MySql services.
My question: is there a GUI based admin tool like phpmyadmin to administer the MySql DB which is already installed? If not can someone point me to a step by step guide for the same. I have been trying since last 4 days and i just can't understand how to do this and what is required? I also saw some post saying something like Oracle Enterprise Manager is available through which we can administer the DB but i just can't find out how to get to the console? Is there a locahost url or something to get it to work?
Finally all i want to do is run Drupal on the Linux server and be able to administer the DB with phpmyadmin, if everything is complicated can i just install LAMP or XXAMP which will give me everything i need in one go. Although i feel since Apache & MySQL is already installed when i installed the OS not sure what will happen.
I know i'm all over the place, making the transition from Windows and am really new to this. Any help will be greatly appreciated.
Thanks,
KK
Oracle Enterprise Linux is based off of the Red Hat sources, just like CentOS.
Found a link on how to get it setup with CentOS 6, which should work for OEL.