I'd like to write an AppleScript for replacing three system files with ones I've modified. I'd like to do this with an AppleScript instead of manually replacing them because I'll have to replace three files every time there's an OS X update. Specifically, I'll be replacing stock graphics drivers with ones I've modified to support a graphics card which is connected via Thunderbolt. Is it possible to write an AppleScript for replacing one file with another? I ask because I know that when you replace a file, a dialog pops up with three options, and I don't know how to address that.
You can do this with Finder:
set freshFile to choose file
tell application "Finder"
move freshFile to desktop replacing yes
end tell
All you need to do is work out the source and destination paths to completely automate the script.
Many scripters do not like working with Finder, for a variety of reasons. If you want something that is incredibly fast, you would use the do shell script inside of your AppleScript:
do shell script " mv -f ~/Desktop/ArlandaTilUppsala.pdf ~/Documents/Employ.pdf"
Related
It's maybe stupid question, but what happens behind the scenes when i double click the word app, or .exe app?
For 'Non-Developer' it just opens the file in right environment after doubleclicking. But I would like to know, how is it done, how can the file manager know what to open? (.docx in word, .txt in texteditor,etc...)
+ I would like to know how can I do that in Node.js, is it the best way to use child_process and if statements for every suffixes?
There is a file association to tell Windows how to treat a certain file extension. You can type assoc in a Windows Command Prompt to see them. As an example:
C:\test>assoc .txt
.txt=txtfile
So Windows knows now, that the file with the extension .txt is a txtfile.
ftype defines, how that filetype is to be handled:
C:\test>ftype txtfile
txtfile=%SystemRoot%\system32\NOTEPAD.EXE %1
So whenever you doubleclick on a file, Windows checks if it is associated with any filetype. Then it looks up, how to handle that filetype and executes that command (in the example above, it opens Notepad with the filename as a parameter).
Both assoc and ftype are able to change the settings (for example to open .txt files with another editor). But if you try that, do yourself a favor and note the original settings, so you are able to revert your changes when needed.
The changes can also be done directly in the registry (not recommended, when you are not experienced in handling the registry)
For Node.js, you can use child_process to shell out to the start command which does similar things as the File Explorer.
E.g. start some/path/to/file.docx will open that file in the default program associated with the format.
I have a directory with multiple files. There is one main file and other ones in subdirectories (including in a virtual environment directory) all of which I want to open with one click in the same instance of PyCharm. Is there a way to do this? Is there a native PyCharm way? Is there a way to do it using a Bash script. For the latter I have managed using pycharm.sh (see Open files from the command line). However, the different files are opened in different PyCharm instances which is not what I want.
I just tried this on Windows running from CMD. Simply listing the paths to the files separated by a space opens them in a single editor instance. (Although the documentation doesn't clearly mention this possibility, suggesting only 1 single file/project as argument).
For example executing the following:
pycharm64.exe C:\test_file1.txt C:\test_file2.txt
Opens like this:
This means PyCharm does accept a list of individual files as command line arguments to open them in a single instance.
all of which I want to open with one click in the same instance of PyCharm.
If the above example works on your shell you should be able to create a shell script that can be clicked.
However, the different files are opened in different PyCharm instances which is not what I want.
I don't know if depending on the shell any special rule applies that might cause each file to be opened in a different PyCharm instance/window, but if that's the case there's also likely to be a shell specific syntax rule to launch a single instance of the application passing multiple arguments.
Is there a native PyCharm way?
It seems PyCharm is naturally geared to working with projects. Looking closely at some functionalities like open/close/search in the PyCharm IDE their logic is entirely "project oriented" not like the usual concept of opening a set of unrelated files as in some other editors. (This is actually really smart, it doesn't clutter the UI with marginal functionalities and it forces users to set up a project - see this thread for a similar example about using search with individual unrelated files in PyCharm).
If you look at the screenshot, it's noteworthy that only 1 file is listed in the Project Tool Window although several files are opened in the editor.
Disclaimer: I'm new to using Rumba to access IBM Mainframe.
I have currently set up a library for personal use and I have some code that I want to store in a member of this library, how can I copy/paste from a .txt file on my desktop into this program??? As of right now I can successfully copy/paste one line at a time from documents outside of Rumba.
There are various ways. The best one will depend upon the size of the file/amount of data to be transferred.
If it's only a few lines, block copy and paste should work, but you might have to play with Rumba's 'paste' edit settings such as how to handle new lines, etc.
Bigger files can be transferred with the TSO file transfer program ind£file (maybe ind$file on your system) which essentially copies a file to the screen and then Rumba 'scrapes' the screen for data to put into a file (this is for a mainframe-to-PC transfer; for going the other way the operation is reversed). This can be surprisingly quick.
Lastly there's FTP - either from the command line or via a program such as WinSCP.
Edit:
Based on your comment that the files are about 300 lines long, I'd look into using Rumba's file-transfer option using the ind$file utility. Once you have the files on one system, speak to your mainframe tech support team about the best way to get them to the other systems.
If you need help uploading the files, then the tech support team should be your first point of call.
What mainframe editor are you running? TSO/ISPF?
I copy and and paste from ".txt" files into ISPS all the time with no problem.
Select the text you want to copy (in the ".txt" file)
Press CTRL-C
Open the mainframe file using ISPF Edit (option 2).
Enter line command "Inn" at the line where where you want the copy to start.
(This inserts "nn" empty lines to receive the copied data. Personally, I usually use "nn"=20)
Position your cursor at the first character of the first empty line.
Press CTRL-V
Good day,
I am a CNC program not a computer programer. I am using CAM software to make cutting programs for our CNC router. The router is a bit old and can only take files 200-300 kb big. We are doing carvings that require 1-2 megs text files. I am using a program called GSplit ( http://www.gdgsoft.com/gsplit/ ) to divvy up the text file. It generates 10-25+ files with a custom header that our machine can read. All the files are great and it works, but I have to manually add the closing lines/footer to each file. The files that are created and used are normal .txt files but with a specific extension, .ANC.
Is there any way to automate this process of opening each individual file, scrolling to the end and copy/pasting the same 1-2 lines of code? The files are NAME[number].ANC in a contained folder. Would it be possible to just direct to a folder and say "add this 'text' to every file in this folder"?
Thanks for your time.
What OS are you using? Using Unix you can do a simple script on command line. If you are in the directory with the specific files simply execute:
for file in *; do echo "APPEND THIS" >> $file; done
If you are running Windows you should be able to do the same using cygwin (probably you could also use the power shell, but I don't know anything about the that)
I found a program Notepad++ (apparently the last person to find it...). USed the find/replace files option. A regular expression(note sure exactly what these are but I'm sure you guys do) "\s+\z" as to what to look for. It finds the last space or whatever at the end of all the files and then adds the code I need. Easy, free, and I don't need to write any computer code. Thanks for the attempt to help me Dirkk! :)
I need to search through all sub directories of a directory and find all files containing a "VERSION" string including a number.
I need to increment this number, so 1.1.2 will be incremented to 1.1.3 etc. and save it in the file again.
I need to run this on Windows machines only, if it makes any difference.
Can I do this with cmd commands or do I need to use a program for this ?
I would like to run this without installing anything if possible.
I ended up writing a Java program to go through the entire structure.
I found that using CMD commands was too complicated for me to structure, and using a Java program I could also easily reuse parts of the program in different but similar structures elsewhere in my file system.
The CMD usage could my the files for me, but extract a single line, manipulating it and putting it back inside the file was not easy using CMD commands, where as using Java was much easier.