Where will I get the opensso.jar within the openAM-12 folder?
This jar file essential for developing the custom module. The amserver.jar is named as openam-core-12.0.0 and opensso-sharedlib.jar is named as openam-shared-12.0.0.
But opensso.jar cannot be found within the folder openAM-12. Please help me.
I don't believe there is a clear replacement for opensso.jar, from what I can see it looks like that it has been mainly separated into OpenFM and openam-cli-impl.
Related
I am following the steps of this page:
https://learn.microsoft.com/en-us/composer/how-to-create-custom-actions
and have reached to the part where it is required to merge the two schemas: bots and your custom one. However when running the powershell script found inside the created project template (CoreAssistant template) I have the following error:
Error conflicting definitions of HelpDialog.dialog :
C:\Users\user\source\repos\AvanadeCoreAssistant\AvanadeCoreAssistant\dialogs\imported\Microsoft.Bot.Components.HelpAndCancel\HelpDialog\HelpDialog.dialog
Microsoft.Bot.Components.HelpAndCancel:
C:\Users\user.nuget\packages\microsoft.bot.components.helpandcancel\1.1.2\exported\HelpDialog\HelpDialog.dialog
Error conflicting definitions of HelpDialog.en-us.lu.dialog :
C:\Users\user\source\repos\AvanadeCoreAssistant\AvanadeCoreAssistant\dialogs\imported\Microsoft.Bot.Components.HelpAndCancel\HelpDialog\recognizers\HelpDialog.en-us.lu.dialog
Microsoft.Bot.Components.HelpAndCancel:
C:\Users\user.nuget\packages\microsoft.bot.components.helpandcancel\1.1.2\exported\HelpDialog\recognizers\HelpDialog.en-us.lu.dialog
Error conflicting definitions of HelpDialog.lu.dialog
HelpDialog is a predefined dialog that was already present. I have installed NodeJs and #botframework-cli package because it was required from the powershell script in order to run bf dialog:merge and now it seems these two sources have some kind of conflict.
To add to other answers, changes that worked for me are as follows:
update-schema.ps1, line 11, change "!**/generated" to "!../generated" and add "!../dialogs/imported"
Also, make sure that your custom action project is INSIDE of your bot directory, it should be a folder next to the "schemas" folder for the script to find it.
Note/Edit: Having the project nested inside the bot works to get the script working, though I do not recommend it due to causing other errors. Oddly, I found it was best to move the whole custom solution up a level, next to the bot project. You may have to edit the [botName].sln file in notepad to reference the location of the project, as well as editing the bot project's project reference.
I fixed it by changing the script. I noticed the script was trying to ignore the folder imported and generated but the error message indicated it was not doing so. So I changed it from !**/generated to !../generated.
I experienced the same issue.
To fix this problem you could simply delete the corresponding dialogs in the "imported" folder. Note that this will, however, delete these dialogs in your bot, which is not optimal but should be of little concern for a sample application.
I have cloned the Industrial Construction Demo code https://github.com/petrbroz/forge-industrial-construction but I am having issues with the 'bucket-name'.
In the launch file you need to specify "FORGE_BUCKET": "" instead of the usual URN.
I have written the name of the bucket that contains my file but it does not work. I have tried debugging it but still no luck.
There is no exemplary bucket or files, so I would really like to know:
-What do I need to put in as the bucket name?
-What files need to be in the bucket?
-What file types?
-Any extra information to help me figure out why it isnt working.
Many thanks,
Poppy
My apologies, I haven't explained this in the code sample very well. The demo requires files in Forge to be named in a specific way. I have just updated the README with more details: https://github.com/petrbroz/forge-industrial-construction.
I am working on a spark java wrapper which uses third party libraries, which will read files from a hard coded directory name say "resdata" from where job executes. I know this is twisted but will try to explain.
when I execute the job it is trying to find the required files in the path something like this below,
/data/Hadoop/yarn/local//appcache/application_xxxxx_xxx/container_00_xxxxx_xxx/resdata
I am assuming it is looking for the files in the current data directory , under that looking for directory name "resdata". At this point I don't know how to configure the current directory to any path on hdfs or local.
So looking for options to create directory structure similar to what the third party libraries expecting and copying required files over there. This I need to do on each node. I am working on spark 2.2.0
Please help me in achieving this?
just now got the answer I need to put all the files under resdata directory and zip it say restdata.zip, pass the file using the options "--archives" . Then each node will have directory restdata.zip/restdata/file1 etc
I have a project structure like -
proj_Main
proj_A(directory)
somefile.cs(etc.)
proj_A.csproj
proj_B(dir)
somefile.cs
proj_B.csproj
proj_C(dir)
somefile.cs
proj_C.csproj
proj_D(dir)
somefile.cs
proj_D.csproj
proj_Main(dir)
other dirs etc.
some.cs files
proj_Main.csproj
proj_Main.csproj.user
proj_Main2010.csproj
proj_Main2010.csproj.user
proj_Main2010.v11.suo
proj_A.sln
proj_B.sln
proj_C.sln
proj_D.sln
proj_Main.sln
proj_Main2010.sln
(There are actually more than 10 solutions inside it, to keep it simple, I have depicted 4 above.)
While opening it in VS 2012 I have opened proj_Main2010.sln and it shows other linked projects with it, opens them inside the solution. This proj_Main refers the dll of other projects from those other projects. So far fine.
Now I have to modify the code from all project files, but if I do that, the previously referenced classes and code stops working, and throws errors of all sort -
Error 2 The type or namespace name 'XXXX' could not be found (are you missing a using directive or an assembly reference?)
I am not sure, If this is the correct way to depict the scenario, my apologies for that.
My problem is, I am not sure If I am opening the right file to work on this solution or if I am trying to modify the files safely.
Any suggestions would be appreciated.
p.s. I also have a setup project in it ( but I guess its related to deploying an application not useful while developing /redeveloping it)
I am trying to use teh Twig i18n Extension.
As far as I can tell the file I need is here:
https://github.com/fabpot/Twig-extensions/blob/master/lib/Twig/Extensions/Extension/I18n.php
Now I am not quite sure where to save this file
I have Twig in a folder called includes/lib (/includes/lib/Twig). I see a folder Extension under Twig. Do I save it here?
After I save it, do I need to do a "require_once" to the file or will Twig_Autoloader do the job for me?
I am not using Symfony2
Thanks
Craig
Here is the complete answer that worked for me:
Copy the file in Twig-Verzeichnis (extract i18n.zip in Twig).
For the I18n extension it would be Twig/Extensions/Extension/I18n.php
Eventually add other files requred by I18n. You will see what these are by the error messages that come. I had to add "Twig/Extensions/Node/Trans.php" and "Twig/Extensions/TokenParser/Trans.php".
In your config file add the following:
// Set language to German
putenv('LC_ALL=de_DE');
setlocale(LC_ALL, 'de_DE');
// Specify location of translation tables
bindtextdomain("project_de_DE", "./locale");
// Choose domain
textdomain("projectl_de_DE");
Register the Twig Extension
$twig->addExtension(new Twig_Extensions_Extension_I18n());
Create the directory locale/de_DE/LC_MESSAGES
Create the PO file (the easisest is to have a sample file to start from)
Open the file in a normal text editor (be sure to use utf-8 encoding) and start translating
Open the PO-Datei with PoEdit (www.poedit.net/)
Save to locale/de_DE/LC_MESSAGES (a MO-Datei will be created).
Add the translation to the appropriate places in the Twig-Template with
{% trans 'Text in the original language' %}`
You need to register this extension with Twig:
$twig->addExtension(new Twig_Extensions_Extension_I18n());
If your installation is configured correctly, the autoloader should do the job of including the file. If not, you could include the file manually or make the installation with composer.
It seems the "proper" way to install these extensions without Composer is as follows:
Download a release from https://github.com/fabpot/Twig-extensions/releases
Copy the contents of the lib/ directory somewhere to your project
include the file .../Twig/Extensions/Autoloader.php
Register autoloader: Twig_Extensions_Autoloader::register();
Continue as explained in the doc: http://twig.sensiolabs.org/doc/extensions/i18n.html