I wrote a program using c# that list all running process in window, i want to list all running process in window, and in each process, i want to list all running thread (both name and id). i can't find any function on Window Api to list thread name, how can i do it ?
Example: plz look at this picture:
lh4.googleusercontent.com/HwP6dpts5uRPJIElH7DgUd3x95aQKO36tynkfsaDMBbM=w607-h553-no
in the image, i want to list
FireFox ID: 123
Google Chorme ID 456
...
Explorer ID 789
Documents ID 654
Temp ID 231
...
Thankyou !
You can use the Systems.Diagnostic namespace and then use:
Process[] processlist = Process.GetProcesses();
foreach(Process theprocess in processlist){
Console.WriteLine(“Process: {0} ID: {1}”, theprocess.ProcessName, theprocess.Id);
}
Source
More info
Related
Need some advises on how I can extract values from output execution of command. Snippet output below. The output generates so much info, but I just need to extract the value of machine, state and address as per snippet below.
I would like to have the output that have list of machine, state and address
machine state address
0 started 1.9.10.34
0/kvm/0 started 1.9.10.21
xxxxx xxxxxxx xxxxxxx
This is the code I used.
for line in stdout:
line = line.strip()
if not line:
continue
#if line.startswith("0"):
machine_id, state, instance_id = line.split()[0:3]
print(f"Machine ID: {machine_id}, State: {state}, Address: {address}")
f.write(f"Machine ID: {machine_id}, State: {state}, Address:
{address}\n")
Please advise how can I only extract the info related to machine, state and address only. Thank you.
I'm working on a little learning project,need to call "getgroups(int gidsetsize, gid_t grouplist[])"
I'v got "0" result of an id should have a list.
while checking all possibilities,I found out the user's group must not be "0",or the function won't return none 0 result.
but i'm only meet this problem on my own computer which running archlinux.
I checked virtual machine which use manjaro or ubuntu,none of them has the problem ,
a co-league has an vps which use arch too do not has the problem.
arch bbs replied "the gid of user should not be 0",but it couldn't explain why my machine is the only one has the problem.
I'v compared id output before the post.
Only the physical machine give me NULL list,and the strace output is different
my machine result
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
getgroups(0, NULL) = 0
getgroups(0, []) = 0
newfstatat(AT_FDCWD, "/etc/nsswitch.conf", {st_mode=S_IFREG|0644, st_size=359, ...}, 0) = 0
other machine's the first getgroups will return none 0 result,and then,the 2nd will use the result as the 1st para to get a list.
I couldn't find the difference by myself.
The ubuntu vm result
getgroups(0, NULL) = 7
getgroups(7, [0, 4, 24, 27, 30, 46, 110]) = 7
"id" command only return the none zero result to get "self" result but not other's because of different execution branch.
Tried edit the user's gid to none 0,after reboot,the result going to normal
Change gid back to 0 again,after reboot,the result is NULL again.
Might be something about user namespace?
Any suggestions?
edit,more info:
Seems the problem is related to "WHO IS THE FATHER".
When the process is child(or grand child etc.) of
/usr/lib/systemd/systemd --user
getgroups will give bad result.
When not(running on i3wm ,the process has no father)the result is good
following the trace of systemd,arch bbs give me this.
User service not running with supplementary groups
------------EDIT---------------
It's not the same problem,possible another bug.
I'm using nRF Connect for Android to test a BLE peripheral. The peripheral is a BSX Insight residual muscle oxygen monitor whose software application is no longer functional or supported by the manufacturer. Thus, my only option to use my device (BSX) is to write my own control software. I've written a Python 3.7 script that I run within a tkinter routine on my 64-bit Win 10 laptop. Also, I'm using the Pygatt library and a BLED112 BT dongle.
I can connect to the peripheral, read and write values just fine to characteristics, but I'm sure that the "conversion" from the process used in nRF Connect and to my script is incomplete and inefficient. So the first thing I'd like to confirm is that the correct respective functions from Pygatt are used. Once I'm using the correct functions from Pygatt, then I can compare respective outputs for the two data (characteristic values) streams that I want to capture and store.
The basic process in nRF Connect:
1. scan
2. select/connect the BSX Insight
3. expose the service and characteristics of interest
4. enable CCCDs
5. write the "start data" values (04-02)
These are the process command results from the nRF Connect log file. Starting with number four:
4.
D 09:04:54.491 gatt.setCharacteristicNotification(00002a37-0000-1000-8000-00805f9b34fb, true) 11
D 09:04:54.496 gatt.setCharacteristicNotification(2e4ee00b-d9f0-5490-ff4b-d17374c433ef, true) 20x
D 09:04:54.499 gatt.setCharacteristicNotification(2e4ee00d-d9f0-5490-ff4b-d17374c433ef, true) 25x
D 09:04:54.516 gatt.setCharacteristicNotification(2e4ee00e-d9f0-5490-ff4b-d17374c433ef, true) 32x
D 09:04:54.519 gatt.setCharacteristicNotification(00002a63-0000-1000-8000-00805f9b34fb, true) 36
D 09:04:54.523 gatt.setCharacteristicNotification(00002a53-0000-1000-8000-00805f9b34fb, true) 40
The above resulted from using the nRF command "Enable CCCDs." Basically every characteristic that could be enabled was enabled which is fine. The 'x' are the three that I need enabled. The others are extra. Note, I've annotated the respective handles for these UUIDs on the end of the line.
V 09:05:39.211 Writing command to characteristic 2e4ee00a-d9f0-5490-ff4b-d17374c433ef
D 09:05:39.211 gatt.writeCharacteristic(2e4ee00a-d9f0-5490-ff4b-d17374c433ef, value=0x0402)
I 09:05:39.214 Data written to 2e4ee00a-d9f0-5490-ff4b-d17374c433ef, value: (0x) 04-02
A 09:05:39.214 "(0x) 04-02" sent
Number five is where I write 0402 to the UUID above. This action sends the data/value streams from:
2e4ee00d-d9f0-5490-ff4b-d17374c433ef, with a descriptor handle 26
2e4ee00e-d9f0-5490-ff4b-d17374c433ef, with a descriptor handle 33
Once I've done the basic steps above in nRF Connect, the two characteristic value streams become active, and I can immediately see the converted values in my Garmin Edge 810 head unit.
So attempting to duplicate the same process within my tkinter snippet:
# this function fires from the 'On' button click event
def powerON():
powerON_buttonevent = 1
print(f"\tpowerON_buttonevent OK {powerON_buttonevent}")
# Connect to the BSX Insight
try:
adapter = pygatt.BGAPIBackend() # serial_port='COM3'
adapter.start()
device = adapter.connect('0C:EF:AF:81:0B:76', address_type=pygatt.BLEAddressType.public)
print(f"\tConnected: {device}")
except:
print(f"BSX Insight connection failure")
finally:
# adapter.stop()
pass
# Enable only these CCCDs
try:
device.char_write_handle(21, bytearray([0x01, 0x00]), wait_for_response=True)
device.char_write_handle(26, bytearray([0x01, 0x00]), wait_for_response=True)
device.char_write_handle(33, bytearray([0x01, 0x00]), wait_for_response=True)
print(f"\te00b DESC: {device.char_read_long_handle(21)}") # notifiy e00b
print(f"\te00d DESC: {device.char_read_long_handle(26)}") # notify e00d SmO2
print(f"\te00e DESC: {device.char_read_long_handle(33)}") # notify e00e tHb
# Here's where I tested functions from Pygatt...
# print(f"\t{device.get_handle('UUID_here')}") # function works
# print(f"\tvalue_handle/characteristic_config_handle: {device._notification_handles('UUID_here')}") # function works
# print(f"{device.char_read('UUID_here')}")
# print(f"{device.char_read_long_handle(handle_here)}") # function works
except:
print(f"CCCD write value failure")
finally:
# adapter.stop()
pass
# Enable the data streams
try:
device.char_write('2e4ee00a-d9f0-5490-ff4b-d17374c433ef', bytearray([0x04, 0x02]), wait_for_response=True) # function works
print(f"\te00a Power ON: {device.char_read('2e4ee00e-d9f0-5490-ff4b-d17374c433ef')}")
except:
print(f"e00a Power ON write failure")
finally:
# adapter.stop()
pass
# Subscribe to SmO2 and tHb UUIDs
try:
def data_handler(handle, value):
"""
Indication and notification come asynchronously, we use this function to
handle them either one at the time as they come.
:param handle:
:param value:
:return:
"""
if handle == 25:
print(f"\tSmO2: {value} Handle: {handle}")
elif handle == 32:
print(f"\ttHb: {value} Handle: {handle}")
else:
print(f"\tvalue: {value}, handle: {handle}")
device.subscribe("2e4ee00d-d9f0-5490-ff4b-d17374c433ef", callback=data_handler, indication=False, wait_for_response=True)
device.subscribe("2e4ee00e-d9f0-5490-ff4b-d17374c433ef", callback=data_handler, indication=False, wait_for_response=True)
print(f"\tSuccess 2e4ee00d: {device.char_read('2e4ee00d-d9f0-5490-ff4b-d17374c433ef')}")
print(f"\tSuccess 2e4ee00e: {device.char_read('2e4ee00e-d9f0-5490-ff4b-d17374c433ef')}")
# this statement causes a run-on continuity when enabled
# while True:
# sleep(1)
except:
print("e00d/e00e subscribe failure")
finally:
adapter.stop()
# pass
Problem: in the output window of my Atom editor, the two data streams start as expected. For example:
I 09:05:39.983 Notification received from 2e4ee00d-d9f0-5490-ff4b-d17374c433ef, value: (0x) 00- 00-00-00-C0-FF-00-00-C0-FF-84-65-B4-3B-9E-AB-83-3C-FF-03
and...
I 09:05:39.984 Notification received from 2e4ee00e-d9f0-5490-ff4b-d17374c433ef, value: (0x) 1C-00-00-FF-03-FF-0F-63-00-00-00-00-00-00-16-32-00-00-00-00
I'll see about seven to ten lines of data before the "stream" stops. There'll be a gap of about 20 seconds, and then a big dump of values. This is different from the output from nRF Connect, which is immediate and continous.
I have the logs from nRF Connect and Python...but I'm not sure which log entry points to the cause of the stop. Might this issue be related to the Peripheral Preferred Connection Parameters? The nRF Connect property read shows:
ConnectionInterval = 50ms~100ms
SlaveLatency = 1
SuperTimeoutMonitor = 200
The Python log entry shows this:
INFO:pygatt.backends.bgapi.bgapi:Connection status: handle=0x0, flags=5, address=0xb'760b81afef0c', connection interval=75.000000ms, timeout=1000, latency=0 intervals, bonding=0xff
Thoughts anyone? (And truly, thanks in advance.)
I've answered my questions. I now have to solve the new problem of why my tKinter dialog is "not responding" as a separate issue.
Thanks All
Edit 3/31/2020: I re-wrote the script using pyQt and now have a functional app.
Working with search console api,
made it through the basics.
Now i'm stuck on splitting and arranging the data:
When trying to split, i'm getting a NaN, nothing i try works.
46 ((174.0, 3753.0, 0.04636290967226219, 7.816147...
47 ((93.0, 2155.0, 0.0431554524361949, 6.59025522...
48 ((176.0, 4657.0, 0.037792570324243074, 6.90251...
49 ((20.0, 1102.0, 0.018148820326678767, 7.435571...
50 ((31.0, 1133.0, 0.02736098852603707, 8.0935569...
Name: test, dtype: object
When trying to manipulate the data like this (and similar interactions):
data=source['test'].tolist()
data
Its clear that the data is not really available...
[<searchconsole.query.Report(rows=1)>,
<searchconsole.query.Report(rows=1)>,
<searchconsole.query.Report(rows=1)>,
<searchconsole.query.Report(rows=1)>,
<searchconsole.query.Report(rows=1)>]
Anyone have an idea how can i interact with my data ?
Thanks.
for reference, this is the code and the program i work with:
account = searchconsole.authenticate(client_config='client_secrets.json', credentials='credentials.json')
webproperty = account['https://www.example.com/']
def APIsc(date,keyword):
results=webproperty.query.range(date, days=-30).filter('query', keyword, 'contains').get()
return results
source['test']=source.apply(lambda x: APIsc(x.date, x.keyword), axis=1)
source
made by: https://github.com/joshcarty/google-searchconsole
First of all, I have to say that I am starting with Python. I would like to grab addresses from a webpage that is built with a script. I try to use Python 3.x and Selenium. The simple code generates a full list of shops, but I want to split it to build a table with named columns( Name, street, zip code etc). I hope that there is a smart solution.
from selenium import webdriver
browser = webdriver.Chrome(executable_path="E:/Dysk Google/Dokumenty/chromedriver")
browser.get("http://hilding.pl/materace-mazowieckie.html")
shops=browser.find_element_by_id('div_province')
print(shops)
browser.close()
Try the below script. Here is how you can go to get name, street, zipcode etc.
from selenium import webdriver
Browser = webdriver.Chrome() ##If necessary, include the path
Browser.get("http://hilding.pl/materace-mazowieckie.html")
for items in Browser.find_elements_by_css_selector("#div_province .shop"):
name = items.find_element_by_css_selector(".name").text
street = items.find_element_by_css_selector(".streat").text
zip_code = items.find_element_by_css_selector(".zipcode").text
print(name,street,zip_code)
Browser.quit()
Partial Output:
SALON NAP ul. Jagielska 73 02-886
SALON NAP/ DOMOTEKA ul. Malborska 41 03-286
SALON NAP ul. Mysia 3 00 - 496
SKLEP ECCELENT DOMOTEKA ul. Malborska 41 03-286
SKLEP ECCELENT, C.H. MEGA MEBLE al. Jerozolimskie 200 02-486
SKLEP ECCELENT, CH JUPITER ul. Towarowa 22 00-839