I have Visual Studio 2013 and a pretty basic MVC web application.
When I am connected to my work network (hard wire or VPN) I can open up VS without issue. However when not connected to my work network I get the following error:
---------------------------
Microsoft Visual Studio
---------------------------
Creation of the virtual directory http://localhost:54156/ failed with the error: Unable to access the IIS metabase. You do not have sufficient privilege to access IIS web sites on your machine.
---------------------------
OK
---------------------------
I've tried granting my user rights to IIS via the aspnet_regiis -ga mydomain\myuser and that did not help.
I am certainly running VS as an administrator. It works just fine when connected to the network. Our security and server teams do not seem to understand why this would behave this way.
Is this IIS Express? I (and those I work with) often get a similar error due to the domain login script encrypting My Documents. It's fixed by simply decrypting
Documents\IISExpress\config\applicationhost.config
Not sure if that's the issue here though;
Ultimately I believe this to be an issue between our network policies and the IIS and .NET installs.
When I was off network it could not access the cached user folders. Switching from having the home drives on network to having them local did not fix the issue (assuming some files were still referencing the network location).
I had my system refreshed and started with my user folders as local and have not had the issue since.
I know it's an old question, but at my location the user profile is stored on the network. When I checked to see if the IISExpress application was encrypted as Chad Schouggins suggested, I didn't even have a documents folder. Ultimately, the answer was really simple:
turn the machine off and back on again.
Related
I have spent 12 hours on this, tried everything that I have read about, but I cannot get a new server farm we have,the website to write to a shared folder.
I have set the application pools, even temporarily (just to try it out) to admin accounts and even set the folder to be available for "everyone".
We have a network specialist who cannot figure it out either, in his favour he does not understand IIS very well and keeps away from it, but at the end of the day, its just a User account and permissions as far as I can see and I have set up the exact same website on a previous W2012 server and IIS 8.5, 7.5 and 6 without major issues (abeit registering 32bit DLLs in a 64bit environment) but all that has gone well and no issue (except for reading and writing to a shared folder).
SO breaking it down to its simplest form, I used a simple FSO script to write a text file in the shared folder, this clearly came back with "Permission denied line X".
Running the script through cscript as a VBS file, it works, running it through IIS. No chance.
Im not going to give up, but running as the top admin login (I had the network guy use HIS identity in the application pool) its not happening.
32bit has been enabled, yes, folder permissions set, yes.
Im at my wits end with the thing. Anything to suggest, I would be happy to listen and try.
Thanks all.
Update: I can write to the same MACHINE as IIS, any folder as long as I set the appropriate permissions. The difference between from this shared folder (I am working on a server farm, I forgot to mention that) is - when you do the security, locations "IIS AppPool\poolidentity" to add the user, it works on the same server, when I try to add that user on the shared folder on the networked server, that user does not appear - does this give any clues?
Ok - for me, after all the right things that I had done, was something I had not tried.
Select the site in IIS, so you sell all the icons for ASP, Authentication, Autohorization Rules, CGI etc.. - select the Authentication and Open Feature
You will see Anonymous Authentication (Enabled), ASP.NET Impersonation (Disabled), Basic Authentication (Disabled) and so on.
Select the Anonymous Authentication, right click Edit - by default it was set to "Specific User" IUSR - now for me, that did not work - so clicked on Application Pool Identity and boom, now its working.
Hope that helps someone else.
I am currently having serious issues connecting to a FoxPro database using an ODBC connection from IIS7.5
The database is on another machine than the IIS server and is accessed via a fileshare.
When I call the webpage from IE on the IIS server everything works fine. When I call the webpage from another machine I get a '[Microsoft][ODBC Visual FoxPro Driver]Cannot open file' error.
The application pool runs as a domain user.
When I run ProcMon on the IIS Server and call the page, when it is called from the IIS Server it accesses the offending file and then a whole bunch of other FoxPro files for that database.
When I run the page from another machine, I get an ACCESS DENIED error when it tries to access the first file.
It is a CreateFile call for a file called Comp_W.DBC that fails.
I checked and it is the same user that is invoking these calls to the fileshare so it is not differing credentials that is causing the problem. I even went as far as making the app pool account a domain admin to see if that might sort out the issue but still the same problem.
I cannot move the database onto the same server as IIS. I have tried to run the web application on the same server as the FoxPro database but I hit different issues to do with the fact that OWA runs on that server, and the 32bit ODBC driver causes conflict with an OWA dll that is loaded as a global module. I really need it to run IIS on a separate server from the FoxPro database.
The server(s) do not seem to be running kerberos as the delegation tab is not present when you administer users.
Any help would be greatly appreciated.
James :-)
I'd use the Visual FoxPro OLE DB driver instead of ODBC, because it's newer, faster and won't conflict with OWA. That would let you move it onto the IIS server.
Past experience suggests that you haven't given the IIS user permission to access the folder where the DBFs live. When you run IE on the local machine, you're passing the credentials right through -- when you run it on another machine, I believe the anonymous user rules come into play. (Been a while since I had to debug this one, take it with a grain of salt.)
I have a website hosted in IIS at location
C:/inetpub/wwwroot/sample
and there is a folder in sample
C:/inetpub/wwwroot/sample/work
I can neither read nor write a file in this work folder. I am using C# to read and write. I have set the NTFS permissions to full access, yet the problem.
Please Help
Thanks
It probably is related to a problem with ACLs, when you run it inside Visual Studio WebDev Server it runs using your identity, and if using Visual Studio in an elevated way (Vista+) then you actually might be running as administrator. When you run it in IIS it runs as a service identity, usually Network Service for IIS 6 and 7, or AppPool Identity for IIS 7 SP2 and IIS 7.5.
One thing that I would recommend is to add some tracing information to the code that is trying to write the file, for example do a try/catch where the exception is sent to trace so that you can enable tracing and determine if an exception is happening or not.
Also make sure that you are using the right physical path since you could also be having issues with relative paths, since IIS will probably resolve them to system32 if you are not using Server.MapPath or something similar.
I have copied parts of an old ASP website out into a new website. On my local machine where the code was cleaned up and tested the website works perfectly, however, on the Windows Server 2000 machine it needs to run on I am getting an error:
HTTP 403.1 Forbidden: Execute Access Forbidden
Internet Information Services
--------------------------------------------------------------------------------
Technical Information (for support personnel)
Background:
You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed.
I have tried giving I_USR full control of the local web directory and selecting Scripts & Executables in IIS. All this has not changed anything.
In the end I tried doing an IIS re-install, but that has not solved the problem.
Any ideas where else I can look?
Check out this Support article and see if it helps with your problem.
While I do not say that your Windows 2000 server was upgraded from .Net 4, it smells like there is something not registered properly with ASP.
I have deployed a web site to a Win 2008 Web server with IIS7. The site works fine on a Win 2003 Standard server with IIS6. On the 2008 box, whenever I request a page (htm or aspx) from a folder named Reports, I get challenged with the Windows Authentication dialog box.
I have Anonymous Authentication and Forms Authentication enabled on the site. I applied Full Control permissions to the root of the site for both NETWORK SERVICE and IIS_IUSRS, but that hasn't make a difference.
Like a previous post already mentioned, here are the detailed steps to fix this:)
If there is a folder in the application named "Reports" and SQL Server Reporting Services are installedon the server, then Reporting Services Virtual Directory folder that is also named "Reports" will be in conflict with the application "Reports" folder.
To fix this open Reporting Services Configuration Manager (Start->All Programs->MS SQL Server->Configuraton Tools) and change the Virtual Directory under the "Report Manager URL" in the menu on the left.
Did you install MSSQL Reporting Services on your new machine? It'll use the Reports folder for the reporting toolkit (default setting) and under MSSQL 2008 you can't enable anonymous Access out of the box.
whats is the authentication mode in your web.config, verify that is not in Windows
<authentication mode="Windows" />
also be sure to disable integrated windows authentication in iis
You could try running FileMon from SysInternals to see if it is the file system that is sending back the "access denied".
Quote from another forum that solved this issue for me:
"SQL Server Reporting Services creates a folder called Reports by default if you install it on IIS. If you install SQL 2008 then Reporting Services doesn't need to use IIS and instead will try to reserve the URL with the HTTP.Sys service.
I believe this is the cause of the conflict you are seeing. What you could try is changing the URL that Reporting Services uses via the SQL Server Reporting Services Configuration Manager."
Well speaking on the same subject here, yesterday I was deploying my application on Windows Server 2008 running IIS7 w/MSSQL 2008 on there too. In my website's tree structure I had a folder named Reports that had a subfolder in it, and then the actual pages. It looked like this "Reports/SalaryReports/SalaryReport.aspx" The interesting thing was that when I clicked on a hyperlink to go to "Reports/SalaryReports/SalaryReport.aspx" I got a username/password prompt from my server. This did not happen on the VS development server when I ran the application on the development machine. So I was like hmm? I looked at the code-behind in SalaryReport.aspx and did not find anything unusual. So then I put a Default.aspx directly in the Reports folder (thinking maybe it was something wrong with the authentication going two nodes down from the root to get to SalaryReport.aspx) but the server still requested username/password even though there was no security settings applied to this new Default.aspx. So I figured it must be that the folder is named "Reports", so I renamed it to "Reports1" and bigno! Everything worked!....I will still look further in this issue today, but it seems that either an IIS 7 HttpModule (not one of mine) is trying to "reserve" the folder that is named "Reports" for itself or something else...I'll look into the SQL Server Reporting services as the above post mentioned...
Anyways, just wanted to share:)
I'm supposing you don't have a SQL Reporting Services running on the same server:
1 - Give rights to user "IUSR" and the user that's running your application pool.
2 - Overwrite child folder permissions and ownership.
2 - Check if there's a web.config file on that folder setting different access rules.