I am trying to check my check box in Geb.
I have tried following codes, but no luck
$('input', type:'checkbox', id: 'chkTermsConditions', tabindex: '-1').value('true')
$(".CheckBoxUI").value('true')
Following is the HTML
After mouse go over the check box additional text updated (marked in the screen shot)
You are attempting to check the box which has the attribute with value='true'
From the Geb manual:
The value of input, select and textarea elements can be retrieved and set with the value method. Calling value() with no arguments will return the String value of the first element in the Navigator. Calling value(value) will set the current value of all elements in the Navigator. The argument can be of any type and will be coerced to a String if necessary. The exceptions are that when setting a checkbox value the method expects a boolean (or, an existing checkbox value) and when setting a multiple select the method expects an array or Collection of values.
Try this:
$("#chkTermsConditions").value(true)
If you are using non standard HTML generated by some other platform. You may have to resort to clicking the element or using javascript.
The element that produces the desired click result could be one of the surrounding elements. If the widget is javascript controlled you may have to call a function that is embedded into the page for that widget. If its a javascript widget I cannot help you unless you can point me to a page which uses the same platform.
Try:
$('a[class=CheckRadioFocus]').click()
$('a[id=termLink]').click()
or any of the other surrounding elements.
I managed to check the check box with $(".CheckBoxStyle").click()
Only issue is still Submit button doesn't get enable. Following is the html code for before and after checking the check box in real situation.
I tried the to click on the submit button with following code. It doesn't give any error. But still doesn't move to next page as expected.May be because of Submit button disable issue.
$("#submitBtnMsg").click()
Edited :
It was turned out above was application related issue. We have to click on the address after selecting via address validation service. Then only Submit button get enable.
$(".RedColor").click()
Related
I am spying one button from one browser based application. But I am getting the error saying more than one item found.
I am able to spy it only under the Accessibility Mode.
Although,I can see in my page that there is only one element in my page.
How to refer my element uniquely under Accessibility Mode as there is no exact path to specify.
If you are not able to see the elements, but Blue Prism is saying that there is more than one element found, then you may have unchecked these two attributes:
Visible
Screen Visible
Try setting them as "True", and please check if that will help with your problem.
Different approach would be to use one of these two:
Match Index
Ordinal
In a nutshell, they tell Application modeller about which item should be used, if there are multiple similar object visible.
I think it happens when you are having two fields having same properties like in a login page, username & password have same properties when you spy these elements using Blue Prism it shows the error.So, to get rid of that error, check the box ordinal in the application modeller popup(which opens after clicking ctrl+left click) after you've spied the element.I hope you got it.
Whenever we spy elements it is recommended to uncheck few attributes like parent url, input identifier, title etc.
"if there is an error stating that more than one matching window found" then at this point we have to uncheck "windows text" and check the ordinal attribute.
Please try below in Application module
Uncheck the checkbox with empty values
Uncheck the ParentURL.
You just need to check the Match Index and Ordinal property of the spied element. Ordinal will always gives you the unique element on the screen.
This is even mentioned in Blue Prism's Training module.
For Browser/Web-based application, Ordinal Attribute cant not be found.
To Spy the exact element, you can also use "Application Navigator" or UI Automation Navigator.
Working on Coded UI testing and for scripts developed using Record Capture and playback feature (ctrl +I).
The problem is when the page has sub-menus (e.g. I need to hover over menu link then click sub-menu). When I record and capture element using Ctrl+I and executed a script it recognizes, but when I ran the script for the second time the element gets changed and it's not recognized.
I have tried simple x path utility posted here but coudn't able to use this feature. What would be the problem for always element id's getting changed. How to resolve it ?
Are you sure it isn't a nested object?
See http://executeautomation.com/blog/how-to-identify-all-the-child-elements-within-a-page-in-coded-ui-test-cuit/
You could also try EnsureClickable()
There could few reasons behind not recognizing an element:
List item Element is not visible when you are trying to click on it.
If Type of Parent Element is e.g. winclient then it’s difficult in coded UI to identify its child elements.
There could various solutions, you can try:
First Click on Menu Item and then click on Sub Menu Item, if you are directly clicking on sub menu item in your recorded script, this will make sub menu element visible.
Also you can check the visibility from Coded UI Test Builder-> Add Assertion button then going to UI Control Map, then select the element in tree and click on Refresh. It will show if element is visible or not.
If Ids are changing, then you can various other properties like Name, ClassName, InnerText, ControlType, TagInstance, ControlName etc. whichever is supported by Element.
I have a report page which displays a crosstab. This is filtered by 5 paramaters. These paramaters are submitted by the user through on page checkbox prompts.
The requirement is to return the data with all values in all paramaters selected on the first run. If I leave default selections blank this behaviour is achieved but all the checkboxes are unchecked which gives misleading feedback to the user.
As an alternative I've manually specified all the values in default selections. However, this has a performance impact.
Does anyone have any alternative suggestions?
I've been looking for a way to specifically link a reprompt button to a value list so only those paramaters are resubmitted (rather than the whole page) but haven't found anything yet.
Thanks in advance - even if the answer is 'no and this is a bad way to go about it'!
One option is to use JavaScript to check all of the checkboxes after the page is rendered with no filtering applied. To do this all filters have to be set to optional. The page is rendered with all data and unchecked checkboxes. The JavaScript fires and checks all checkboxes so that the state of the prompts matches the state of the data. This happens so fast the user likely won't know the boxes weren't checked initially. A reprompt button will, when clicked, enforce whatever choices the user makes after that.
Since version 10.2, Cognos has provided a fairly simple JavaScript API to allow for render-time manipulation of prompt controls. Hopefully, you are working with 10.2 or later otherwise the code provided will not work. Here is a bit of JavaScript code that will loop through all prompts and select all values within them:
var report = cognos.Report.getReport("_THIS_");
var prompts = report.prompt.getControls();
if (typeof firstrun == "undefined") {
var values;
for (var i=0;i<prompts.length;i++) {
values = prompts[i].getValues(true);
prompts[i].addValues(values);
}
var firstrun = false;
}
Notes:
All value prompts behave the same way regarding the 10.2+ JavaScript Prompt API. It doesn't matter whether you choose a drop-down, list, checkbox or radio button interface. The way we code for all of these variations is the same. The provided code would work just as well with a list as it would with checkboxes.
Make sure that you wrap your code in script tags and that the HTML Item object you place on your page to hold the code appears below all prompt controls. If it is placed elsewhere it will not be able to find the prompt controls as they will not have been rendered when the code executes.
The code assumes that the only prompts on the page are the checkboxes you want checked. If there are other prompts on the page then you will have to target individual prompts using the getControlByName() function provided in the API rather than looping through all prompts. More information on the Cognos JavaScript Prompt API can be found here.
The key bits of code here are the getValues() and addValues() Cognos JavaScript Prompt API functions. getValues(true) returns a JSON-formatted object representing all values, selected or not, from a value prompt. addValues(values) takes a JSON-formatted object representing the values to be selected and selects them. Thus, it's a matter of grabbing all values and then passing them in to be selected.
The reason for the if block is that we only want this code to run once at first page render. When the user first runs the report we want all checkboxes checked but after that we want the checkboxes to retain state. If we didn't use the if block the user's choices would be overwritten after a reprompt. For more information on this technique check out this tutorial on my blog: JavaScript: Running Code Only Once.
Addendum
If you don't want any filters to be applied when all boxes are checked in a section even after subsequent reprompts you can do so by tweaking your filter.
Assume that we are checking against a model based item [Item1]. We have a current filter of: [Item1] in ?parameter1?. We also have four checkboxes with values of 'Choice1','Choice2','Choice3', and 'Choice4'.
The following modified filter will only apply the checkboxes to the filter when all four aren't checked:
(
'Choice1' in ?parameter1?
AND
'Choice2' in ?parameter1?
AND
'Choice3' in ?parameter1?
AND
'Choice4' in ?parameter1?
)
OR
[Item1] in ?parameter1?
If all four checkboxes are checked then the first part of the OR is satisfied and all rows will be returned. It should be fast too because most languages, including iterations of SQL, will not test the second component of an OR if the first component is satisfied.
I have a repeat control for a domino view which displays the results from a search field.
As you type more characters into the search field the number of items in the list is reduced. If/When the the list only contains a single item I would like to open item automatically, without having to click the link.
Any ideas are appreciated.
Edit: after some very interesting responses, here are some screenshots
I have 3 elements on the page, a searchbar, a repeat control and a form:
When I start typing in the search bar, the repeat is refreshed with every keystroke:
the list is reduced, typing the next character ...
again the list is reduced, only 2 left, typing again....
Only one left, now it would be time to open the document in the form ..... without clicking the link.
I've tried several events on the page, but it seems that I could not find the one that will allow me to "select" the document and display the data in the form.
It seems that it's not as simple as I thought
Since you want to open the link automatically I don't know if I would try to base it on the getRowCount() of the repeat itself. You don't want to even get that far right? you just want to go to the single document.
I would put a function in beforePageLoad event maybe. Not totally sure which event but I'd try that first. Use SSJS and do a lookup that would basically return a collection of what the repeat would show. If the collection count = 1 then get your destination from that entry and do your redirection from there.
That what I would try at least. Interesting scenario!
Now that I see the screenshots this might be easier then you think and I have already implemented something similar on an internal application that I have built. It does rely on the fact that each entry in the list is 100% unique.
First of all you will need to bind the search field to a scoped variable and the onchange/onkeypress event will need to perform a partial refresh of a panel that contains both the list and the document portion of the page.
For the list the link on each item should set the value of the same scoped variable used in the search box and clicking the link should be set to run a partial refresh of the document area.
For the document area you will need two panels, the first panel will only display if there is no matching document and the second panel will only display if there is a matching document, you can do this in the rendered section by writing some ssjs that grabs a handle to the db/view and does a dblookup and returns either true or false if the document exists depending on panel your dealing with.
With this setup, when somebody clicks a link or fills out the searchbox the scoped variable will contain a value, the document panels will then check to see if this is a unique value in the view in the db and update themselves to either display the 'no document' panel or the 'document' panel accordingly.
You could add a evaluation script to the entry of your repeat control which checks the size of your repeat control using the method getRowCount() from the component. If this is 1 you could execute a context.redirectToPage("yourpage.xsp?id=yourid",true) this forces the current page to send a redirect request back to the browser and therefore redirects you to the correct page.
All you need to know is which xpage you need to open and which parameters you should use. But these could be retrieved from the content you are iterating over.
I am trying to work with mouseover on a particular Item in my application by using the following command
{
ie.text_field(:xpath, "//a[contains(text(),'Deal')]").fire_event('onmouseover')
}
On doing mouseover on a item, two subitems are displayed.
Is there any way to capture the sub items which are part of the Item by doing mouseover with which we can report that our test is pass or fail.
Please suggest.
Additional Information :
If we take example,On the StackOver flow page, If i do mouseover on my name, i get a window where i see activity, privileges, Logout and other stuff. This is really what i was looking for. Is there a way to capture the items displayed on the window on doing mouseover.
I also tried to capture the subitems with the following :
{
text=ie.text_field(:xpath, "//a[contains(text(),'Deal')]").fire_event('onmouseover')
puts(text.inspect)
}
On doing this "text" value is displayed as 'nil'.
My general tactic for such things is a combination of using IRB and the IE Developer tool, or Firebug.
using IRB, type out (or cut and paste) the watir statement to fire the onmouseover command to the proper element on the page.
Then have the developer tool rescan the DOM (there's a little refresh icon you can click) The use the tool to point to an element to point to one of the items in the stuff exposed by the onmouseover. Using the info from that, you can then figure out how to address those elements to get the text from the proper div, etc.
If I do that here to the info that opens up when I float the mouse over my name I can find out that it is a table of class "profile-recent-summary" Furthermore I can then look at the way the table is made up and see for example that the 'today' reputation value is in the second cell on that row.. The row also has the text 'reputation' in it.. so
browser.table(:class, 'profile-recent-summary').row(:text, /reputation/).cell(:index, 2).flash
Should flash the cell I want (index might be 1 if using firewatir or webdriver) I can then replace the .flash with something else like .text if I want to get the text from that cell (which is actually inside a link that sits in the cell)..
without seeing your code, I would 'inspect' the element that you are trying to verify and when_present (text) assert that its true