Disable kudu for the running web app.
Why? Kudu is consuming the CPU periodically and I want to stop that.
So far I have tried to Kill the process by clicking on Properties >> Kill button. but this process gets start again.
You can use below settings in Application settings.
When separation enabled (the default), the main site and scm site run in different sandboxes.
WEBSITE_DISABLE_SCM_SEPARATION=true
Then you can check Process Explorer.
Offical Doc:
Use the same process for the user site and the scm site
I'm getting this error in the event log (EventViewer):
The Module DLL C:\Windows\System32\inetsrv\iis_ssi.dll failed to load. The data is the error.
OS is Windows2012 Server. How to fix it?
You need to add SSI in Server Manger. Follow these steps:
Add Roles and Features
In Server Roles, expand Web Server (IIS)
Expand Application Development
Select Server Side Includes
For Windows 2012r2 Operating systems, to be more precise following this step:
Open Server Manager Dashboard
Click on Add Roles and Features
Expand Web Server IIS (if not already selected)
Expand Web Server
Expand Application Development and ensure that all unchecked boxes are selected.
Click Next on the select feature windows to advance
In the Confirm installation selection select specify an alternate source path for the installation CD such as F:\sources\sxs to complete the installation.
I just stopped an Application Pool in IIS. When trying to start it, IIS complains that,
The service cannot accept control messages at this time. (Exception from HRESULT: 0x80080425).
What gives? Whence did this error come?
Looking at the Event Viewer > System shows these warnings:
A worker process '1456' serving application pool 'MyAppPool' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number.
A process serving application pool 'MyAppPool' suffered a fatal communication error with the Windows Process Activation Service. The process id was '10592'. The data field contains the error number.
A process serving application pool 'MyAppPool' exceeded time limits during shut down. The process id was '10516'.
This resolved itself after about 5-minutes, at which point we tried to restart the website, and received:
The World Wide Web Publish Service (W3SVC) is stopped. Web sites cannot be started unless the World Wide Web Publishing Service (W3SVC) is running.
So, we started the W3SVC service, and then we could start our website.
This helped me: just wait about a minute or two.
Wait a few minutes, then retry your operation.
Ref: https://msdn.microsoft.com/en-us/library/ms833805.aspx
The error message could result due to the following reason:
The service associated with Credential Manager does not start.
Some files associated with the application have gone corrupt.
Please follow the steps mentioned below to resolve the issue:
Method 1:
Click on the “Start”
In the text box that reads “Search Program and Files” type “Services”
Right click on “Services” and select “Run as Administrator”
In the Services Window, look for Credential Manager Service and “Stop” it.
Restart the computer and “Start” the Credential Manager Service and set it to “Automatic”.
Restart the computer and it should work fine.
Method 2:
1. Run System File Checker. Refer to the link mentioned below for additional information:
http://support.microsoft.com/kb/929833
In my case, the VS debugger was attached to the w3wp process. After detaching the debugger, I was able to restart the Application Pool
I stopped the IIS Worker Process (in task manager), and then started the IIS again.
It worked.
I killed related w3wp.exe (on a friends' advise) at task manager and it worked.
Note: Use at your own risk. Be careful picking which one to kill.
Restarting the machine worked for me but not every time.
If you are really stuck on this then follow below steps
Open Task Manager
A window will open. Click on Details tab.
Search for the process name you wanted to restart/stop.
Select process, right click on it, select End task option.
A confirmation dialog box will appear. Click on End process button.
Now try to restart your service from Services.msc window.
I forgot I had mine attached to Visual Studio debugger. Be sure to disconnect from there, and then wait a moment. Otherwise killing the process viewing the PID from the Worker Processes functionality of IIS manager will work too.
Restarting the IIS windows service (World Wide Web Publishing Service) and then starting the application pool has worked for me. However, as the top answer suggests it may have just been the waiting that caused it to subsequently work.
I had this issue recently,
Problem statement:
Mine was a windows service that I run locally by attaching VS debugger. When I stop debugging and try to restart/stop the service (under services.msc) I used to get the mentioned error.
Solution:
Open up Task manager.
Search for the service (based on the exe name and not service name, for those that are different).
Kill the service.
On doing the above the service is stopped.
Being impatient, I created a new App Pool with the same settings and used that.
I kept having this problem whenever I tried to start an app pool more than once. Rather than rebooting, I simply run the Application Information Service. (Note: This service is set to run manually on my system, which may be the reason for the problem.) From its description, it seems obvious that it is somehow involved:
Facilitates the running of interactive applications with additional administrative privileges. If this service is stopped, users will be unable to launch applications with the additional administrative privileges they may require to perform desired user tasks.
Presumably, IIS manager (as well as most other processes running as an administrator) does not maintain admin privileges throughout the life of the process, but instead request admin rights from the Application Information service on a case-by-case basis.
Source: social.technech.microsoft.com
So I've backed myself into a corner - I wanted an application or command to run when a user logged in over RDP to a server. As per a best-practice suggestion on a Microsoft site, I set up this program to run under group policy rules and now I have a dilemma:
I log into my server via RDP, the default program launches and then immediately logs me out without a chance for me to do anything.
How can I get into the box again to change this setting? Server is Windows 2008 r2 with terminal services installed on a remote IP.
Could you just remove\edit the GPO, wait a bit, and then reboot the server? You could still send it the "shutdown /m \computername". You could also use psexec to remotely run "gpupdate /force" before rebooting.
If you set that up as local group policy, then you can try opening mmc, choosing the Group Policy editor, and pointing it to that machine to edit the policies. In more detail:
Start --> Run --> mmc
File --> Add/Remove Snap-in
Under the Standalone tab, click Add...
Choose Group Policy Object Editor
In the following wizard, click the Browse button
Click the "Computers" tab, select the Another computer radial button, and type the name or Browse to the remote computer
Click OK, then Finish, then Close, and finally OK
Also you could maybe edit/add a logon script that runs "shutdown -a" to abort logoff/shutdowns, but that may not work due to timing.
You didn't mention if this was Domain, or local, but those options should take care of either.
I have a Redhat 5 OS, a dual monitor setup, and two workspace. When the machine reboots, I want to set the following:
On workspace 1,
* run the thunderbird-client on the left monitor.
* run 3 terminal clients on the right monitor.
On workspace 2,
* run firefox on the right monitor.
Can someone point me as to where I can set these settings? I am sure there is a way since when my machine boots up, couple of terminal clients pops up, my irc chat client pops up as well. I do not know how I did this before.
You could try Devil's Pie (yum install devilspie)
It's a tool for creating rules that will bind specific actions to applications as they are launched (i.e. setting workspace, position, transparency, etc...).
I found some doc here: http://www.foosel.org/linux/devilspie and here: http://live.gnome.org/DevilsPie
Of course, saving your workspace on logout can help too (System > Preferences > More Preferences > Sessions, then check "Automatically save changes to session").
Once you have setup your application rules, you could write a simple Bash script to start them all in sequence, and add that script to the Startup programs in the sessions preferences.