How do I add the following strings to show the total in asp page?
<%=moviesA%>
<%=moviesB%>
Currently, moviesA = 1000 and moviesB = 400 (both strings are dynamic). I want to display "There are currently 1400 movies in our archives."
Thanks in advance!
To do this you would first add the two numbers and the use Cstr() to change it to a string for writing.
Example:
totalmovies=moviesA+moviesB
response.write ("There are currently " + cstr(totalmovies) + " movies in our archives.")
Note if moviesA and moviesB are Strings already then you need to change them to int before doing the addition then line 1 would be:
totalmovies=cint(moviesA) + cint(moviesB)
Hope it helps.
Thank you both! The cint method did the trick.
The code I ended up using has a slightly different structure...
There are currently
<%totalmovies=cint(moviesA) + cint(moviesB)
response.write (cstr(totalmovies))%>
movies in our archives.
Cheers!
Related
I have two Fields, with partly different strings. FieldA:= "String1" FieldB:= "String1; String2" (So, the main difference between the two fields is the "; String2" in FieldB). The result i want to see is also "String1; String2", but the first half i want from FieldA, and the second half i want from FieldB. Is there any way using Access SQL/VBA function to solve this problem?
With the assumption that your values will always contain a semi-colon, you could also use the Split function in the following way:
[FieldA] & ";" & Split([FieldB],";")(1)
Yes. Use string manipulation functions. This is a relatively simple case for string manipulation, assuming the strings are consistent with the examples given. Consistency is critical to string manipulation. Assuming there is a space following the semi-colon, try:
[FieldA] & "; " & Mid([FieldB], InStr([FieldB], ";") + 2)
Expression can be used in query or textbox or VBA.
Suggest you do some research and learn about these and other string functions.
Hi I would like to extract dynamically the numbers from string in Excel.
I have the following strings and I would like to have only the numbers before ". pdf". taken out of the string into the next column.
As you can see the number of characters varies from line to line.
I have invented something like this:
=MID(M20;SEARCH("_";M20);20)
But this takes out only the numbers after "_" and .pdf after this....
How to make it the way I like?
D:\Users\xxxx\Desktop\1610\ts25b_4462.pdf
D:\Users\xxx\Desktop\1610\ts02b_39522.pdf
D:\Users\xxxxx\Desktop\1610\ts02b_except_39511.pdf
D:\Users\xxxx\Desktop\1610\ts02b_except_39555.pdf
D:\Users\xxxx\Desktop\1610\ts22b_6118.pdf
So that I have just :
4462
39522
39511
39555
6118
and so on...
Thank you!!!
With VBA, try to do it like this:
Public Function splitThings(strInput As String) As String
splitThings = Split(Split(strInput, "_")(1), ".")(0)
End Function
Concerning your formula, try to use =LEFT(MID(M20;SEARCH("_";M20);20),K), where K is the difference of the length of ts22b_6118.pdf and 4 (.pdf). 4 is the length of .pdf.
Something like this should do the work:
=LEFT(MID(I3,SEARCH("_",I3)+1,LEN(I3)),LEN(MID(I3,SEARCH("_",I3),LEN(I3)))-5)
You should do it using Excel formula. For example:
=SUBSTITUTE(LEFT(A1,FIND(".pdf",A1)-1),LEFT(A1,FIND("_",A1)),"")
Using the first line as an example, with LEFT(A1,FIND(".pdf",A1)-1) you will have D:\Users\xxxx\Desktop\1610\ts25b_4462 and with the LEFT(A1,FIND("_",A1)) D:\Users\xxxx\Desktop\1610\ts25b_, if you SUBSTITUTE the first part by "" you will have 4462.
Hope this can help.
With this formula, you should be able to get the numbers you want:
=MID(A1,FIND("|",SUBSTITUTE(A1,"_","|",LEN(A1)-LEN(SUBSTITUTE(A1,"_",""))))+1,FIND(".",A1)-FIND("|",SUBSTITUTE(A1,"_","|",LEN(A1)-LEN(SUBSTITUTE(A1,"_",""))))-1)
Basically, this is the initial fomula:
=MID(A1,FIND("_",A1)+1,FIND(".",A1)-FIND("_",A1)-1)
But since there may be two _ in the string so this is the one to find the 2nd _:
=SUBSTITUTE(A1,"_","|",LEN(A1)-LEN(SUBSTITUTE(A1,"_","")))
Now just replace this SUBSTITUTE with A1 above and you get that long formula. Hope this helps.
This will return the number you want regardless of extension (could be .pdf, could be .xlsx, etc) and regardless of the number of underscores present in the filename and/or filepath:
=TRIM(LEFT(RIGHT(SUBSTITUTE(SUBSTITUTE(M20,".",REPT(" ",LEN(M20))),"_",REPT(" ",LEN(M20))),LEN(M20)*2),LEN(M20)))
I have a string (46318g_orchidpinkminisneakpead) Here i want to chop off the part till "_" and give me the result. So my result should be "orchidpinkminisneakpead" now what expression should I use to get this value in ssrs and the chopped string size do differ sometimes it can be 7 char sometimes it can be 8,9 also.
I am building the report using a cube so no changes can be done on the back-end.
Try:
=MID(Fields!YourField.Value,
InStr(Fields!YourField.Value,"_")+1,
LEN(Fields!YourField.Value)
)
In your case,
=MID(
"46318g_orchidpinkminisneakpead",
InStr("46318g_orchidpinkminisneakpead","_")+1,
LEN("46318g_orchidpinkminisneakpead")
)
should produce orchidpinkminisneakpead
Let me know if this helps.
I am looking for a function in Microsoft Excel that can separate number with symbol. For the example :
I want to separate number in this code:
12345_ABCD
I am looking for a function that can enables me to get the number (in this case 12345) without another character (in this case _ABCD).
And the problem is the the total character of number can be vary. For the example, it can be 12345_ABCD or 234_ABC or 34567_AB.
Please kindly help my problem. Thanks for your concern
If your cells always have numbers in front and then an underscore you could use this:
=Left(A1;Find("_";A1)-1)
Here is the function to get the number alone (in your case)
Public Function segregatenumber(a As String)
segregatenumber = Left(a, InStr(a, "_") - 1)
End Function
then you may use it as function in Excel cells
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 8 years ago.
Improve this question
We have been asked by a client to incorporate ICD-9 codes into a system.
I'm looking for a good resource to get a complete listing of codes and descriptions that will end up in a SQL database.
Unfortunately a web service is out of the question as a fair amount of the time folks will be off line using the application.
I've found http://icd9cm.chrisendres.com/ and http://www.icd9data.com/ but neither offer downloads/exports of the data that I could find.
I also found http://www.cms.hhs.gov/MinimumDataSets20/07_RAVENSoftware.asp which has a database of the ICD-9 codes but they are not in the correct format and I'm not 100% sure how to properly convert (It shows the code 5566 which is really 556.6 but I can't find a rule as to how/when to convert the code to include a decimal)
I'm tagging this with medical and data since I'm not 100% sure where it should really be tagged...any help there would also be appreciated.
Just wanted to chime in on how to correct the code decimal places. First, there are four broad points to consider:
Standard codes have Decimal place XXX.XX
Some Codes Do not have trailing decimal places
V Codes also follow the XXX.XX format --> V54.31
E Codes follow XXXX.X --> E850.9
Thus the general logic of how to fix the errors is
If first character = E:
If 5th character = '':
Ignore
Else replace XXXXX with XXXX.X
Else If 4th-5th Char is not '': (XXXX or XXXXX)
replace XXXXX with XXX + . + remainder (XXX.XX or XXX.X)
(All remaining are XXX)
I implemented this with two SQL Update statements:
Number 1, for Non E-codes:
USE MainDb;
UPDATE "dbo"."icd9cm_diagnosis_codes"
SET "DIAGNOSIS CODE" = SUBSTRING("DIAGNOSIS CODE",1,3)+'.'+SUBSTRING("DIAGNOSIS CODE",4,5)
FROM "dbo"."icd9cm_diagnosis_codes"
WHERE
SUBSTRING("DIAGNOSIS CODE",4,5) != ''
AND
LEFT("DIAGNOSIS CODE",1) != 'E'
Number 2 - For E Codes:
UPDATE "dbo"."icd9cm_diagnosis_codes"
SET "DIAGNOSIS CODE" = SUBSTRING("DIAGNOSIS CODE",1,4)+'.'+SUBSTRING("DIAGNOSIS CODE",5,5)
FROM "dbo"."icd9_Diagnosis_table"
WHERE
LEFT("DIAGNOSIS CODE",1) = 'E'
AND
SUBSTRING("DIAGNOSIS CODE",5,5) != ''
Seemed to do the trick for me (Using SQL Server 2008).
I ran into this same issue a while back and ended up building my own solution from scratch. Recently, I put up an open API for the codes for others to use: http://aqua.io/codes/icd9/documentation
You can just download all codes in JSON (http://api.aqua.io/codes/beta/icd9.json) or pull an individual code (http://api.aqua.io/codes/beta/icd9/250-1.json). Pulling a single code not only gives you the ICD-10 "crosswalk" (equivalents), but also some extra goodies, like relevant Wikipedia links.
I finally found the following:
"The field for the ICD-9-CM Principal and Other Diagnosis Codes is six characters in length, with the decimal point implied between the third and fourth digit for all diagnosis codes other than the V codes. The decimal is implied for V codes between the second and third digit."
So I was able to get a hold of a complete ICD-9 list and reformat as required.
You might find that the ICD-9 codes follow the following format:
All codes are 6 characters long
The decimal point comes between the 3rd and 4th characters
If the code starts with a V character the decimal point comes between the 2nd and 3rd characters
Check this out: http://en.wikipedia.org/wiki/List_of_ICD-9_codes
I struggled with this issue myself for a long time as well. The best resource I have been able to find for these are the zip files here:
https://www.cms.gov/ICD9ProviderDiagnosticCodes/06_codes.asp
It's unfortunate because they (oddly) are missing the decimal places, but as several other posters have pointed out, adding them is fairly easy since the rules are known. I was able to use a regular expression based "find and replace" in my text editor to add them. One thing to watch out for if you go that route is that you can end up with codes that have a trailing "." but no zero after it. That's not valid, so you might need to go through and do another find/replace to clean those up.
The annoying thing about the data files in the link above is that there is no relationship to categories. Which you might need depending on your application. I ended up taking one of the RTF-based category files I found online and re-formatting it to get the ranges of each category. That was still doable in a text editor with some creative regular expressions.
I was able to use the helpful answers here an create a groovy script to decimalize the code and combine long and short descriptions into a tab separated list. In case this helps anyone, I'm including my code here:
import org.apache.log4j.BasicConfigurator
import org.apache.log4j.Level
import org.apache.log4j.Logger
import java.util.regex.Matcher
import java.util.regex.Pattern
Logger log = Logger.getRootLogger()
BasicConfigurator.configure();
Logger.getRootLogger().setLevel(Level.INFO);
Map shortDescMap = [:]
new File('CMS31_DESC_SHORT_DX.txt').eachLine {String l ->
int split = l.indexOf(' ')
String code = l[0..split].trim()
String desc = l[split+1..-1].trim()
shortDescMap.put(code, desc)
}
int shortLenCheck = 40 // arbitrary lengths, but provide some sanity checking...
int longLenCheck = 300
File longDescFile = new File('CMS31_DESC_LONG_DX.txt')
Map cmsRows = [:]
Pattern p = Pattern.compile(/^(\w*)\s+(.*)$/)
new File('parsedICD9.csv').withWriter { out ->
out.write('ICD9 Code\tShort Description\tLong Description\n')
longDescFile.eachLine {String row ->
Matcher m = row =~ p
if (m.matches()) {
String code = m.group(1)
String shortDescription = shortDescMap.get(code)
String longDescription = m.group(2)
if(shortDescription.size() > shortLenCheck){
log.info("Not short? $shortDescription")
}
if(longDescription.size() > longLenCheck){
log.info("${longDescription.size()} == Too long? $longDescription")
}
log.debug("Match 1:${code} -- 2:${longDescription} -- orig:$row")
if (code.startsWith('V')) {
if (code.size() > 3) {
code = code[0..2] + '.' + code[3..-1]
}
log.info("Code: $code")
} else if (code.startsWith('E')) {
if (code.size() > 4) {
code = code[0..3] + '.' + code[4..-1]
}
log.info("Code: $code")
} else if (code.size() > 3) {
code = code[0..2] + '.' + code[3..-1]
}
if (code) {
cmsRows.put(code, ['longDesc': longDescription])
}
out.write("$code\t$shortDescription\t$longDescription\n")
} else {
log.warn "No match for row: $row"
}
}
}
I hope this helps someone.
Sean