Tutorial for NodeJS's htmlparser? - node.js

I don't really understand the readme of htmlparser.. and I searched over the internet but cannot find a proper tutorial for it (or other NodeJS parsers).
I believe for most of the time if there's no tutorial for a pretty complete and old library it's mostly because that it's easy to do thus people don't really feel the need to write tutorial for it... But I found NodeJS html parser is pretty hard to understand...

You should check out htmlparser2. It's the newer htmlparser and it's got a decent readme. The way I tend to use it isn't streamish, and thus looks something like this:
handler = new htmlparser.DomHandler(function(err, dom) {
// ... DO CODE HERE
})
new htmlparser.Parser(handler).parseComplete(html_string)
For the code inside the handler function, I use soupselect because it's documented and I'm lazy, but htmlparser2 guys suggest domutils, but it has no documentation.

Related

Processing insists pause() is not a function, when it very much is

Aite, [first poster here, pls don't bash]
So, I'm using the sound library, which I of course remembered to import, and works just fine, proof being given by the fact that all the other functions I used work as expected and give no problems neither in editor nor in execution.
Except, of course, for this little bugger of a pause() function, which I wrote as per below using no different a syntax from all the other functions, only to find out Processing isn't very keen on accepting its existence.
Problem shows both using 3.3.6 and 3.5.
Oh, and also, apparently isPlaying() returns an int, what's up with that?
If, as I'd suspect, that single line below won't be enough code to couple with the info to get to the bottom of it, here's a Dropbox link to the code (since it uses a bunch of files) so you can test it yourself.
It kinda won't work if you try to run it as is tho because it messes up when trying to load all the songs (in the last line of setup), yeah I kinda need some help with that too... works fine if you only load the first one tho!
https://www.dropbox.com/sh/di7mwit0w2l4513/AABipGDAdoKx277f8Hg_ZfhDa?dl=0
(Please, don't expect clear, extensively commented coding. I started working on this way before I learnt that was a thing. Deeply sorry. Of course, you can ask away about anything baffling you)
What did I try, er, writing it well???
I used .play(), .stop(), the volume ones, and they all, as per stated, work fine.
import processing.sound.*;
SoundFile[] songs= new SoundFile[1];
void setup(){
songs[0]=new SoundFile(this,"Small Bump.mp3");
songs[0].play();
}
void draw(){
}
void keyPressed(){
if (songs[0].isPlaying()==1)songs[0].pause();
}
When I copy your code into my Processing editor, I get a couple errors:
songs[0]="Small Bump.mp3";
The sounds array holds instances of SoundFile, but you're trying to store a String value here. Maybe you're looking for the SoundFile constructor?
if (songs[0].isPlaying()==1)
The isPlaying() function returns a boolean value, but you're comparing it to an int value.
songs[i].pause();
You haven't declared this i variable anywhere. Probably meant for this to be a 0.
If I fix all of these errors, then your code compiles fine.
You might want to take a look at the reference for the Sound library here.
The Sound library I had installed was 1.3.2, or something of the likes.
All the references I'd read were for 2.0+.
Having updated that through the "add library" menu, all was solved.

How to find a source file used in process.binding('..') in node source code?

I want to see source code of the file mentioned in process.binding() statement in nodeJS source code, have seen similar question on stackoverflow but most of them answers to specific cases like fs etc.
I want explanation based on which I should be able to find any file mentioned in process.bindings().
Since this question is lying here for very long I decided to give it another try to find the answer and found one very nice presentation online.
Process.bindings presentation
To summaries this, process.bindings() binds the javascript object with the C++ object which exposes the C++ functions to be executed from javascript, essentially it creates a javascript wrapper around the C++ functions to make it available from NodeJS.
To find which C++ function is bound to which javascript function you can dig into NodeJS source tree here NodeJs source tree . Names are straightforward to map with core module names and look for signature env->SetMethod(target, "<modulename>", <C++ function name>);
Example: env->SetMethod(target, "stat", Stat);

What is string externalization?

I'm learning best practices for internationalization and see that 'string externalization' comes up often. What does this mean? Looking up on google always results in people recommending some plugin for java, but I'm trying to come up with something on javascript.
String externalization means, instead of writing:
console.log("Hello, world");
you load the string from an external source, like a text file or a database. The code then looks like this:
console.log(gettext("Hello, world"));
The gettext function then does the whole work of loading the externalized string. This is one of the ingredients for translating software.

Typescript - Further Exploration into "require" and paths

I had resigned myself to the fact that every require statement in Typescript had to be relative to the file you were typing in, but I recently discovered an application that does this differently and it confuses me. I was hoping someone with enough skill could explain how this is working to me.
The application in question is the new Raven DB HTML5 Studio, which uses typescript, you can find the whole application here:
RavenDB HTML5 Studio
When browsing its source code, I came across something interesting... if you go and look at many of the files; In specific the one I am looking at... app/viewmodels/deleteItems.ts, it has a reference at the top that reads..
import document = require("models/document");
but models/document isn't a path relative to deleteItems.ts, but this works. Can someone explain how this is happening? I'm linking you RIGHT to the exact files I'm talking about. This kind of behavior is littered all over this application.
app/viewmodels/deleteItem.ts
app/models/document.ts
This is exactly the kind of behavior I really wanted to try and emulate in my own code, since trying to keep all of the paths relative to the file I'm working in is a headache, but this program seems to be completely free of that requirement.
This doesn't necessarily involve RavenDB, but I am tagging it anyway, because perhaps someone who has read over the Raven repository will understand it and be able to answer.
Update
I am trying to mimic this behavior in my own code, and not finding any success. I am sorry if I seem outright stupid, but this is all really confusing me. Here is what my structure looks like; My repository is private, so I cannot really just link to it.
app_content
scripts
home
controls
models
editors
utils
UserControls.ts
UserMapping.ts
UserElements.ts
ui
lib
jquery
jquery.js
jquery.validate.js
jquery.ui.js
kendo
kendo.all.js
kendo.aspnetmvc.js
// other libraries
Alright, that's a general feel for my folder layout. All typescript files are under the /home folder so that I can prevent github from saving their compiled javascript and locking that.
So then, in the file UserControls.ts, it looks like this right now...
import userElements = require('./UserElements');
import userMapping = require('./UserMapping');
export class UserControls {
// code
}
No matter what combinations I have tried, this is the only format/syntax that doesn't throw errors in Visual Studio. But from what I see in the RavenDB project, I should very much be able to declare it like ...
import userElements = require('utils/UserElements');
import userMapping = require('utils/UserMapping');
export class UserControls {
// some code
}
No matter what combinations I have tried, this is the only format/syntax that doesn't throw errors in Visual Studio. But from what I see in the RavenDB project, I should very much be able to declare it like ...
That is because they are using a drandalJS configuration to tell it how to resolve the file path. (see https://github.com/ayende/ravendb/blob/New3/Raven.Studio.Html5/App/main.js)
There isn't a similar configuration (basePath) for TypeScript at the moment. Your best option is to use relative paths as you've already noticed.
PS: an old but still relevant video that shows you how requirejs config works and relevance when using TypeScript https://www.youtube.com/watch?v=4AGQpv0MKsA&hd=1
The TypeScript compiler's module resolution algorithm is essentially undocumented, unfortunately. It tries to "split the difference" between AMD and CommonJS's module resolution rules, so it's somewhat hard to reason about.
What you're seeing here is an attempt to mimic CommonJS's "walk up the tree" resolution rule. When in the path C:\a\b\c\d resolving x, first C:\a\b\c\d\x is tried, then C:\a\b\c\x, then C:\a\b\x, and so on until it hits the root folder and gives up.

Java Card program using GPJ

So I was tasked to create a java client to communicate with java card.
Right now I can authenticate, write and read data using javax.smartcardio but having a bit of trouble trying to upload cap file and install it.
So after googling around, I found that I can use gpj as a library and use it in my java application to upload and install the cap file.
The problem is I can't find any documentation for gpj and I can't understand the code without one.
Here's one that I have trouble to understand public void installAndMakeSelecatable(AID paramAID1, AID paramAID2, AID paramAID3, byte paramByte, byte[] paramArrayOfByte1, byte[] paramArrayOfByte2)
Even when I look on the other part of the code, I can't find out the last parameter since all that use these method will pass null.
So if anyone know where can I find the documentation, I would be really glad. Or better yet, another library that can upload cap file and have some documentation with it.
so far, I've found gpj,jpcsc,jcManager and opal.
Nevermind, it seems that I'm not a clever guy.
For future reference, you can find out what to pass to what method by looking through the main method of the Global Platform Services class. For parameter that you are not sure what to pass, just use null.

Resources