Any help would be appreciated. I need the CountIf statement to count all the data points that are equal to 00:00. The column is formatted for 24hr time due to other formulas. The 00:00 is a product of an if statement. I have tried many options but it won’t calculate unless I reformat the column to general, but in doing that it messes up my time formation which I need to be 24hr format. Thanks.
Sub Sample()
Dim result As Long, firstrow As Long, lastrow As Long
Dim ws As Worksheet
Dim rng As Range
'~~> Set this to the relevant worksheet
Set ws = ThisWorkbook.Sheets("Sheet1")
With ws
'~~> Find Lastrow in Col D
lastrow = .Range("V" & .Rows.Count).End(xlUp).Row
'~~> Set First row
firstrow = 16
'~~> Set your range
Set rng = .Range("V" & firstrow & ":V" & lastrow)
'~~> Put relevant values
.Range("U" & lastrow + 3).Value = "No Slip Time"
.Range("V" & lastrow + 3).Value = _
Application.WorksheetFunction.CountIf(rng, "*00:00")
End With
End Sub
Notes:
The string "00:00" and time 0 are not the same.
Date and time is a number where 0 is midnight, 1 a day and 0.5 is 12 hours.
Based on your comments you have the following formula in column v, =IF((K16="NA"),"00:00",IF(K16<>"na",K16)), use this instead.
=IF(Upper(K16)="NA",0,K16)
If you have #N/A in cell K16 you need to replace the above "NA" with NA().
Also once done you can use the countif as follows.
Application.WorksheetFunction.CountIf(rng.value2 , "0")
Related
I have the below code where in all other columns there is many populated rows, what I need this formula to do in column F is to find the first blank, then place the formula in it and fill it down to the last row.
What is currently happening is I have the range as F26 as this is usually first blank but this could change and I want the code to identify this and also have the formula dynamically know what row it is on, so for example if one month the first blank was in cell F30 the range would find it and the formula would start as E30*G30.
Any help would be greatly appreciated.
Private Sub calc()
Dim lastrow As Long
Dim rng As Range
lastrow = ThisWorkbook.Worksheets("Indiv").Cells(Rows.Count, 1).End(xlUp).Row
Set rng = Range("F26:F" & lastrow)
rng.Formula = "=Round((E26*G26),2)"
End Sub
You need to find the first free row in column F and then bulid your formula with this row:
Option Explicit
Private Sub calc()
Dim ws As Worksheet ' define worksheet
Set ws = ThisWorkbook.Worksheets("Indiv")
Dim LastRowA As Long ' find last used row in column A
LastRowA = ws.Cells(ws.Rows.Count, 1).End(xlUp).Row
Dim FirstFreeRowF As Long ' find first free row in column F (if first 2 rows have data)
FirstFreeRowF = ws.Cells(1, "F").End(xlDown).Row + 1
' fix issue if first or second row is empty
If FirstFreeRowF = ws.Rows.Count + 1 Then
If ws.Cells(1, "F").Value = vbNullString Then
FirstFreeRowF = 1
ElseIf ws.Cells(2, "F").Value = vbNullString Then
FirstFreeRowF = 2
End If
End If
' define range to add formula
Dim Rng As Range
Set Rng = ws.Range("F" & FirstFreeRowF, "F" & LastRowA)
' add formula
Rng.Formula = "=Round((E" & FirstFreeRowF & "*G" & FirstFreeRowF & "),2)"
End Sub
So this will consider F5 the first free row and fill in the formula in the selected range as seen below:
I think you should find the last used row in column F, so that you could know the next row is blank
lastrowF=sheets(sheetname).range("F" & rows.count).end(xlup).row
So the next row would be like
range("F" & lastrowF+1).formula="Round((E" & lastrowF+1 & "*G" & lastrowF+1 & ",2)"
I've been trying to find a solution for that problem but nothing came up.
Here is the problem I've got. I would like to copy a variable data range from a sheet called ("Amounts") starting in range "C3" to an other sheet called ("Pasted Amounts") in range F2 as many time as columns, in sheets "Amounts" are starting with the following value " Amounts in USD".
I've been coding something but it doesn't work... I put a counter in a cell to count how many time there are columns starting with the value " Amounts in USD" in order to pick the value appearing in that cell and repeat the paste process. But I've been complicated the code I guess...
Here is my code;
Dim cel2 As Range
Dim counter as Integer
With Sheets("Amounts")
Worksheets("Amounts").Activate
For Each cel2 In Range("A2", Range("A2").End(xlToRight))
If cel2.Value Like "Amount in USD*" Then
counter = counter + 1
Range("U4").Value = counter
End If
With Worksheets("Pasted Amounts").Activate
'~Here is bellow the column named " clients name" I want to paste in "Pasted amounts" sheet (by coping it in the sheet "Amounts"
worksheets("Amounts").Range("C3",range("C3").end(xldown).Select
'~ Paste the range copied in sheet " Pasted Amount" as many time the counter value is
.Copy Range("F2").Resize(.Count * counter)
End With
Next cel2
End With
End sub
Once again, I'd appreciate so much your help...
Mido88
Sub test()
Dim LastColumn As Long, LastRow As Long, counter as Long
With Sheets("Amounts")
LastColumn = .Cells(1, .Columns.Count).End(xlToLeft).Column
LastRow = .Cells(.Rows.Count, "C").End(xlUp).Row
counter = WorksheetFunction.CountIf(.Range("A1", .Cells(1, LastColumn)), "Amount in USD*")
.Range("C3:C" & LastRow).Copy _
Worksheets("Pasted Amounts").Range("F2").Resize(.Range("C3:C" & LastRow).Count * counter)
End With
End Sub
Or as a silly long one line of code:
Sub test()
Sheets("Amounts").Range("C3:C" & Sheets("Amounts").Cells(Sheets("Amounts").Rows.Count, "C").End(xlUp).Row).Copy Worksheets("Pasted Amounts").Range("F2").Resize(Sheets("Amounts").Range("C3:C" & Sheets("Amounts").Cells(Sheets("Amounts").Rows.Count, "C").End(xlUp).Row).Count * WorksheetFunction.CountIf(Sheets("Amounts").Range("A1", Sheets("Amounts").Cells(1, Sheets("Amounts").Cells(1, Sheets("Amounts").Columns.Count).End(xlToLeft).Column)), "Amount in USD*"))
End Sub
Alright I found the solution!
Thank you again Siddharth and Christofer, your answers helped me a lot to think further...
Here is the solution that worked really well! I used the answer in the previous post I made here:link and added a single line code to paste as many time the range of datas as" Amounts in USD " was found in the previous sheet.
Sorry again for those misunderstandings. I hope that my answer would help you and the other users in need!
Here it is;
Sub Sample()
Dim wsInput As Worksheet
Dim wsOutput As Worksheet
Dim lRowInput As Long
Dim lRowOutput As Long
Dim lCol As Long
Dim i As Long
Dim Col As String
'~~> Set your sheets here
Set wsInput = Sheets("Amounts")
Set wsOutput = Sheets("Pasted Amounts")
With wsInput
'~~> Find last column in Row 2
lCol = .Cells(2, .Columns.Count).End(xlToLeft).Column
'~~> Loop through columns
For i = 1 To lCol
'~~> Check for your criteria
If .Cells(2, i).Value2 Like "Amount in functional currency*" Then
'~~> Get column name
Col = Split(.Cells(, i).Address, "$")(1)
'~~> Get the last row in that column
lRowInput = .Range(Col & .Rows.Count).End(xlUp).Row
'~~> Find the next row to write to
If lRowOutput = 0 Then
lRowOutput = 2
Else
lRowOutput = wsOutput.Range("A" & wsOutput.Rows.Count).End(xlUp).Row + 1
End If
'~~> Copy the datas ( for each column where Amounts in USD was found)
.Range(Col & "3:" & Col & lRowInput).Copy _
wsOutput.Range("A" & lRowOutput)
~~> SOLUTION BELLOW-Copy the variable data range ("C3")
Worksheets("Amounts").Activate
.Range("C3", Range("C3").End(xlDown)).Copy wsOutput.Range("F" & lRowOutput)
End If
Next i
End With
End Sub
Mido
I want to paste the formula into a column by searching the column using its name.
My column name is Date1.
I want to find Date1 in my sheet and paste the following formula:
IF(ISBLANK(B5),"""",IF(ISBLANK(O5)=TRUE,""Missing PSD"",TODAY()-O5))
This should be calculated until the last row of Date1 column.
Kindly share any knowledge you have on this, it'd be very helpful.
Sub FillFormula()
Set wb = ActiveWorkbook
Dim sh As Worksheet, lastRow As Long
Set sh = wb.Worksheets("Sheet1")
lastRow = sh.Range("O" & Rows.count).End(xlUp).Row 'chosen O:O column, being involved in the formula...
sh.Range("AC5:AC" & lastRow).Formula = "=IF(ISBLANK(B5),"""",IF(ISBLANK(O5)=TRUE,""Missing PSD"",TODAY()-O5))"
lastRow2 = sh.Range("R" & Rows.count).End(xlUp).Row
sh.Range("AD5:AD" & lastRow).Formula = "=IF(ISBLANK(B5),"""",IF(ISBLANK(R5)=TRUE,""Missing RSD"",TODAY()-R5))"
End Sub
This is the code I am currently using and it works properly but my columns might change so I do not want to use the column character but instead the column name to paste the data into the correct column.
Try the next code, please. It still calculates the last row based on O:O column. If the column "Date1" has already formulas to be overwritten, I can easily adapt the code to use it:
Sub FillFormulaByHeader()
Dim wb As Workbook, sh As Worksheet, lastRow As Long, celD As Range
Set wb = ActiveWorkbook
Set sh = wb.Worksheets("Sheet1")
'Find the header ("Date1"):
Set celD = sh.Range(sh.Range("A1"), sh.cells(, cells(1, Columns.count).End(xlToLeft).Column)).Find("Date1")
If celD Is Nothing Then MsgBox "Nu such header could be found...": Exit Sub
lastRow = sh.Range("O" & rows.count).End(xlUp).row 'it can be easily changed for column with Date1 header
sh.Range(sh.cells(5, celD.Column), sh.cells(lastRow, celD.Column)).Formula = _
"=IF(ISBLANK(B5),"""",IF(ISBLANK(O5)=TRUE,""Missing PSD"",TODAY()-O5))"
End Sub
For simplicity, let's assume you have Headers in Row1. We now need to find out which column our Date1 Value is in. We can do this by simply looping over the Header Range an check if the Value equals "Date1". Now we can use this information to construct the final Range.
Sub FindDate1()
Dim c As Range
Dim date1Column as integer
Dim finalRange As Range
For Each c In Range("A1:Z1")
If c.Value = "Date1" Then
date1Column = c.Column
Exit For
End If
Next c
If date1Column = 0 Then
'in case "Date1" was not found
Exit Sub
Else
Set finalRange = Range(Cells(2, date1Column), Cells(2, date1Column).End(xlDown))
For Each c In finalRange
c.Formula = "=IF(ISBLANK(B" & c.Row & "),"""",IF(ISBLANK(O" & c.Row & ")=TRUE,""Missing PSD"",TODAY()-O" & c.Row & "))"
Next c
End If
End Sub
I have an Excel file with information in column A and column B. Since these columns could vary in the number of rows I would like to use the function offset so that I could print the formula in one time as an array rather than looping over the formula per cell (the dataset contains almost 1 million datapoints).
My code is actually working the way I want it to be I only can't figure out how to print the code in Range(D1:D5). The outcome is now printed in Range(D1:H1). Anybody familiar how to use this offset within a for statement?
Sub checkOffset()
Dim example As Range
Dim sht As Worksheet
Dim LastRow As Long
Set sht = ThisWorkbook.Worksheets("Sheet1")
LastRow = sht.Cells(sht.Rows.Count, "A").End(xlUp).Row
Set example = Range("A1:A1")
For i = 1 To LastRow
example.Offset(0, i + 2).Formula = "=SUM(A" & i & ":B" & i & ")"
Next i
End Sub
Using the Offset(Row, Column), you want to offset with the increment of row (i -1), and 3 columns to the right (from column "A" to column "D")
Try the modified code below:
Set example = Range("A1")
For i = 1 To LastRow
example.Offset(i - 1, 3).Formula = "=SUM(A" & i & ":B" & i & ")"
Next i
One way of outputting the formula in one step, without looping, to the entire range, is to use the R1C1 notation:
Edit: Code modified to properly qualify worksheet references
Option Explicit
Sub checkOffset()
Dim example As Range
Dim sht As Worksheet
Dim LastRow As Long
Set sht = ThisWorkbook.Worksheets("Sheet1")
With sht
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
Set example = .Range(.Cells(1, 1), .Cells(LastRow, 1))
End With
example.Offset(columnoffset:=3).FormulaR1C1 = "=sum(rc[-3],rc[-2])"
End Sub
You don't need to use VBA for this. Simply type =sum(A1:B1) in cell D1 and then fill it down.
If you're going to use VBA anyway, use this:
Sub checkOffset()
Dim example As Range
Dim sht As Worksheet
Dim LastRow As Long
Set sht = ThisWorkbook.Worksheets("Sheet1")
LastRow = sht.Cells(sht.Rows.Count, "A").End(xlUp).Row
Set example = Range("A1:A1")
For i = 1 To LastRow
example.Offset(i - 1, 3).Formula = "=SUM(A" & i & ":B" & i & ")"
Next i
End Sub
The way offset works is with row offset, column offset. You want the column to always be fixed at 3 to the right.
So essentially, what I'm trying to do is this:
------A--------B-------C-------D------
1 Date Weight Misc ID*
2 2014-06-12 210 445556
3 2014-07-13 150 546456
4 2014-08-14 265 546456
5 2014-09-15 655 655654
6 2014-10-16 87 546656
7 2014-10-17 1552 545488
8 2014-11-18 225 546545
I have a button and I want it to run a macro that checks if the dates in Column A fall within the current month. I've tried using
Month(Date)
but it checks the entire date, not the month only.
If the month in the cell in colmumn A equals the current month, I want it to copy the entire row of information corresponding to that particular cell. For example: When the current month is november, I want it to copy A8+B8+C8+D8, then I will paste that information in a whole different workbook.
Keep in mind that I'm completely new to VBA, but this is what I've come up with so far:
Sub dat()
Dim rng As Range
Dim dat As Date
dat = Month(Date)
For Each rng In Range("A2:A100")
If rng.Value = dat Then
Range("???").Copy
Range("A1").PasteSpecial
End If
Next
End Sub
Nothing really happens. If I change it to dat=Date then it only works for this particular day, and it takes forever to run through 1000 cells.
I was thinking if I could use Cells(Rows.Count, "A").End(xlUp).Value = Month(Date) somehow. Is this even possible?
EDIT: To paste in a different workbook I used the following commands:
Dim wb As Workbook
Set wb = Workbooks.Open("C:\Users\....DOCUMENT.xlsm")
And then to paste:
wb.Sheets("Sheet1").Range("A" & NextDest & ":F" & NextDest).PasteSpecial
Just change the "Destination Sheet" to the name of the sheet you want to copy to.
Sub dat()
Dim LastRow As Long
Dim CurRow As Long
Dim NextDest As Long
Dim ws As Worksheet
Set ws = Sheets("SOURCE SHEET")
LastRow = ws.Range("A" & Rows.Count).End(xlUp).Row
For CurRow = 2 To LastRow
If IsDate(ws.Range("A" & CurRow).Value) = True Then
If Month(ws.Range("A" & CurRow).Value) = Month(Date) Then
ws.Range("A" & CurRow & ":D" & CurRow).Copy
NextDest = Sheets("DESTINATION SHEET").Range("A" & Rows.Count).End(xlUp).Row + 1
Sheets("DESTINATION SHEET").Range("A" & NextDest & ":D" & NextDest).PasteSpecial
Else
End If
Else
ws.Cells(CurRow, 1).Interior.Color = RGB(255,0,0)
End If
Next CurRow
End Sub
Edit: Your DESTINATION SHEET will now add rows after the last used row. Also, the code will check if the value is a date first and will highlight if not a date.
Change this
If rng.Value = dat Then
To
If month(rng.Value) = dat Then