I need to find changed values in dataSet.
So I have 2 sheets with, in general, same data.
I have two columns: docID(which is unique key) and rev(which is not unique).
I need to find(highlight/display only/...) those rows, where for same docID from first sheet rev is different in the second sheet.
UPDATE 1
Sheet 1:
docID rev
1 5
2 6
3 1
Sheet 2:
docID rev
1 6
2 6
3 1
Only the first row makes an interest to me, as others did not changed.
UPDATE 2
simple if statement which should give some understanding what I need. In general this is done on similar test data set, so cells are incorrect.
=IF(NOT(AND($B6=Sheet1!$B6;$C6=Sheet1!$C6));1;0)
So values are NOT equal.
You can do this with a custom formula in Conditional Highlighting:
Select the top cell in the column docID column, then select the whole column (in the example, I assume that this is column A and you select A1 and the rev is in column B, same structure in both sheets. Adjust as to your needs)
Goto home->Conditional Formatting->New rules->Use formula to determine which cells to format and enter the following formula:
=VLOKUP(A1,Sheet1!$A:$B,2,0)<>B1
Click on format and select the format you need.
Done!
Related
The excel file contains a structure table. (which I find difficult to work with but I can't alter the file structure, I am just adding a summary tab with various counts from the data table.)
Item
Month
1
2
2
2
2
2
2
3
3
3
3
4
The item number itself can repeat and be repeated within the same month.
I was able to get a count of total number of unique items using this formula.
=SUMPRODUCT((Item_tab[Item]<>"")/COUNTIF(Item_tab[Item],Item_tab[Item]&""))
Looking for how to count the number of unique items within a specific month.?
Example of Desired output.
Edit/Set formula for Month 2 , output should be 2
Edit/Set formula for Month 3 , output should be 2
Edit/Set formula for Month 4 , output should be 1
I cannot figure out how to apply countifs to something that needs to avoid duplicates in multiple columns.
Tried this but returns #VALUE!
=SUMPRODUCT((Item_tab[Item]<>"")/COUNTIFS(Item_tab[Item],Item_tab[Item]&"",'Item'!M:M,6))
The month column was added later and I don't know how why or how to get that column to have the structured table column Header like everything else.
The sheet name is Item
The Table Name is Item_tab
I can find where to rename the table but not the columns. Not sure the variance is causing an issue. The month column is absolutely part of the table in every way that I can see.
You can try the following in cell D2:
=LET(A, A2:A7, B, B2:B7, uxB, UNIQUE(B), cnts, BYROW(uxB, LAMBDA(u,
ROWS(UNIQUE(FILTER(A, B=u))))), HSTACK(uxB, cnts))
Here is the output:
If you want to get the result repeated instead of consolidating the result by unique months, you can try the following:
=LET(A, A2:A7, B, B2:B7, uxB, UNIQUE(B), BYROW(B, LAMBDA(u,
ROWS(UNIQUE(FILTER(A, B=u))))))
If you don't have such function available, you can try the following formula in D2, it produces the same result as the first formula:
=CHOOSE({1,2}, UNIQUE(B2:B7),
MMULT(N(MMULT(TRANSPOSE(N(B2:B7=TRANSPOSE(UNIQUE(B2:B7)))),
N(A2:A7=TRANSPOSE(UNIQUE(A2:A7))))>0), SEQUENCE(ROWS(UNIQUE(A2:A7)),,1,0)))
or using LET for a better reading and maintenance:
=LET(A, A2:A7, B, B2:B7, CHOOSE({1,2}, UNIQUE(B),
MMULT(N(MMULT(TRANSPOSE(N(B=TRANSPOSE(UNIQUE(B)))),
N(A=TRANSPOSE(UNIQUE(A))))>0), SEQUENCE(ROWS(UNIQUE(A)),,1,0))))
Ok I have 2 excel columns
1st column A "Workstream", is a data list with three numbers as a dropdown. 1,2,3
2nd column B "ID", would like to auto-populate based on the selection made from the left adjacent cell + perform a lookup to get the MAX number in the current column and ADD by 1.
For Example:
Workstream
ID
1
W1-001
1
W1-002
1
W1-003
1
W1-004
2
W1-001
1
W1-005
2
W1-002
So when a user selects from the drop-down in column A then Column B auto-populates with something like this
="W"&A:1&"-"
However, in order to complete the value, it needs to do the following:
="W"&A:1&"-" Search for the Max Record in Column B that starts with 1 or whatever value was entered into Column A, then include the next number based on the MAX value selected in Column A
So in the above example, let's say I Enter "2" in column A, then the value that auto-populates in column B would be
| 2 | W2-003
or if I selected 1 from column A given where we left off then the value that would auto-populate in column B would be:
| 1 | W1-006
If I am understanding correctly and you want the format to be "W" followed by number of the workstream (as inferred from the text of your question) try:
="W"&A2&"-"&TEXT(COUNTIF(A$2:A2, B2), "000")
If instead you want the output exactly as shown in the picture you provided, it's even easier:
="W1-"&TEXT(COUNTIF(A$2:A2, B2), "000")
EDIT: You might consider pre-dragging the formula to all the rows that you think have the possibility of being impacted so that you don't have to drag the formula each time you add a row. In that case, try:
=IF(A2="","", "W"&A2&"-"&TEXT(COUNTIF(A$2:A2, B2), "000"))
A B C D E F G
1 Date: 9/15/2016 9/16/2016 9/17/2016 9/18/2016 9/19/2016 9/20/2016
2 Points: 0.5 1 - - 0.5 1
The above data is on tab 1 of an excel spread sheet
And below are fields on tab 2 of the same excel spread sheet:
A B
1 DATE: Points
2
3
4
5
I am trying to write a formula that will go through the dates and points rows on tab 1 and when it finds a date with a corresponding point it will populate that date in tab 2 under the Date column. Simple enough right? Well here's where I'm running into problems, I need a formula to include the following criteria:
1) If the date does not have a corresponding point in the second row on tab 1 it will skip it and move on to the next date to validate it and so on
*note- I also need the Points column on tab 2 to populate with the corresponding date, but I believe a simple HLOOKUP formula will work just fine
2) I would like to have the formula to where it can be duplicated on tab 2 cells A3,A4,A5 and so on, but as an example: if A2 has date of 9/15/2016, when the formula in A3 is checking for dates with corresponding points in tab 1, it will skip the date in tab 2 located in A2 since it's already been used
Below is a picture of the above data in case it didn't come out right, and thanks for the help!!
Use this array formula:
=IFERROR(INDEX('Tab1'!$B$1:$G$1,MATCH(1,('Tab1'!$B$2:$G$2<>"")*(COUNTIF($A$1:A1,'Tab1'!$B$1:$G$1)=0),0)),"")
Being an array formula it needs to be confirmed with Ctrl-Shift-Enter when exiting edit mode instead of Enter. If done correctly then Excel will put {} around the formula.
This will create a list as it is dragged/copied done. The list will be in the same order as the list on tab1.
I have an issue that I've been scratching my head at; I've looked into the Index:Match lookup method, and V/HLookup, but I'm not sure these will help just yet. Here's what's happening:
I have two worksheets in excel-2007. One has a Customer ID column (which does and will have duplicate ID's in the instance that the customer did "x activity" more than one time in a month) and then the date that this happened in another column. The second sheet is for giving an overview of a specific day, IE what happened on 7-1-13.
The issue is that my raw data sheet is sorted via the first of the month descending, so 7-1,7-2,etc, and when I run the Vlookup, if a Customer ID has a record on 7-2 and on 7-15, the VLookup will pull data only from the 7-2 (first) row. Has anyone experienced this and found a workaround?
My current workaround would be to make either a new table for each day's data, or instead of using my VLookup of =Vlookup(A2, 'Data Sheet' A:D, 4, 0) to give the columns row numbers, like =Vlookup(A2, 'Data Sheet' A$1:D$30, 4, 0). This is a daily report, and that would be intense. Please help if you can!
(Another side note, I have one main sheet for the view, one data sheet where it's all collected, and then 30 sheets, one for each day of the month, this case being July). For each sheet, I've named them the day of the month, so I'm reflecting the data as such:
Sheets("7-1-13") has data from the 1st on it. The Data Sheet in it's entireity has data from 7-1-13 to 7-31-13. I need to reference ID's on the 1st to the data for the 1st and the 1st only.
I want to use something like this, but I'm having a hard time with it
=Vlookup(A2, 'Data Sheet', A:D (ONLY IF THE CREATE DATE OF THIS ITEM IS 7-1), 4,0)`
but of course it's not that easy :p
This may not give you your results in a format you like and still requires a bit of manual work, but without going the route of macros, I think this will get you one step closer. I thought of using an array formula to get all the IDs by a specific date.
Example:
A B
ID Date
1 5 7/1/2013
2 2 7/2/2013
3 5 7/3/2013
In this situation, I assume you want 5 from the first row to appear on your 7/1 sheet, 2 to appear on your 7/2 sheet, and 5 from the third row to appear on your 7/3 sheet
on your 7/1 sheet. you'll need to select the number of blank rows that matches your raw data (using the example above, you would be selecting A1:A3 on your 7/1 sheet). Once you have your cells selected, then enter the following formula in the formula bar and press Ctrl+Shift+Enter. This is what makes the formula an array formula.
=((Raw_DataSheet!B1:B3=DATE(2013,7,1))*1)*Raw_DataSheet!A1:A3
What this formula does is looks at all the dates in B1:B3 and finds the ones that equal 7/1/2013. Since you're using an array formula, this gives you the array {TRUE,FALSE,FALSE}. Multiply this by 1, and you get the array {1,0,0}. You now have an array that has a 1 for each row of B1:B3 that was equal to 7/1/2013. This array {1,0,0} is then multiplied by your Customer IDs {5,2,5}
5 * 1 = 5
2 * 0 = 0
5 * 0 = 0
So now your entire formula is equal to the array {5,0,0}. Since you selected A1:A3 on your 7/1 sheet, the values that should appear should be
A
ID
1 5
2 0
3 0
From here, you can always filter out the 0's and you'd just have a list of all the IDs that had the date of 7/1 from your Raw Data Sheet. You would also then replicate this for each of your sheets and just change the date in the formula...Yes, I know, way more complicated than you probably wanted but it's what I came up with!
I have a table in Excel. In each row, I want to highlight the columns that correspond to the maximum value in that row.
For example, if I have this table:
0 1 2 3
4 5 3 5
8 9 3 4
I want to highlight 3 in row 1, 5 in row 2 and 9 in row 3.
How can I do that automatically?
THANKS!
In Excel 2008, you can use Conditional Formatting in the Styles section of the Home Tab. Choose "Highlight Cells Rule", then "More Rules...". That opens the "New Formating Rule" dialog. Choose "Format only top or bottom ranked values". Then choose Format values that rank in the "Top" 1 and leave the % of selected range box UNchecked. Then click the Format button to pick the format that you want.
If you want to be able to do this fully automatically, what you can do is record a macro that does the actions described above and use that to repeat for all rows of your table.
I think you could do this with conditional formatting, and you wouldn't require code. Just create a formula that looks to see if the cell value is equal to MAX(range_name) and highlight the cell in whatever way you choose.
This is somewhat roundabout, but works for me. Add an extra column (E) somewhere, so you end up with this for data:
A B C D E
1 0 1 2 3 =MAXA(A1:D1)
2 4 5 3 5 =MAXA(A2:D2)
3 8 9 3 4 =MAXA(A3:D3)
Then in a cell, add a conditional format:
For A1: =IF(A1 = $E$1, 1, 0)
Use the format painter to copy this to the other cells in the row. Then copy to the column, modify each column so the $E$1 reference is corrected, and copy to those rose as well
Ugly, but gets the job done. Probably a quicker way to do it with VBA.