I'm trying to write a simple program that uses EGL, but when I include bcm_host.h, gcc says it doesn't exist, so I add /opt/vc/include to the makefile, it says that another header is missing, I add another directory, and now, after 6 folders, I don't really want to do it anymore but gcc wants more. I have looked at the /opt/vc/src/hello_pi/Makefile.include file, and it adds just 3 folders. So the question is: what am I doing wrong?
Here's the makefile:
LIB_DIR = -L/opt/vc/lib
INCLUDE_DIRS = -I/opt/vc/include -I/opt/vc/include/interface/vcos/ -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmc_host/linux -I/opt/vc/include/interface/vmcs_host -I/opt/vc/include/interface/vchi -I/usr/include/SDL -I-
LIBS = -lSDL
bin:
gcc $(LIB_DIRS) $(INCLUDE_DIRS) $(LIBS) main.c
I included bcm_host.h in a project where I was using code from the dispmax example. I have very similar makefile settings, with the exception that I added -lbcm_host as a library:
# Include the Broadcom hardware interface library
XINCDIR += /opt/vc/include
XINCDIR += /opt/vc/include/interface/vcos/pthreads
XLIBS += -L/opt/vc/lib/ -lbcm_host
That worked for me, although I wasn't trying to use EGL specifically. You probably need -lEGL instead or in addition.
Related
Im having problem when i build a fresh project , nothing was added/ remove; i get an error no such file or directory 'atomic'
So i investigate a bit and i kind of found the culprit on the makefile. on line 43
line 43: LIBS = $(SUBLIBS) /opt/Qt/6.2.3-armv7l/lib/libQt6Quick.so /opt/Qt/6.2.3-armv7l/lib/libQt6OpenGL.so /opt/Qt/6.2.3-armv7l/lib/libQt6Gui.so -lEGL /opt/Qt/6.2.3-armv7l/lib/libQt6QmlModels.so /opt/Qt/6.2.3-armv7l/lib/libQt6Qml.so -pthread /opt/Qt/6.2.3-armv7l/lib/libQt6Network.so /opt/Qt/6.2.3-armv7l/lib/libQt6Core.so -latomic -lpthread -lGLESv2 atomic
removing word "atomic" at the end removes the error but im not sure if this is the right thing to do as it might cause some weird bugs under the hood. Qt says the line causing the error is line 228
line 227: untitled: $(OBJECTS)
line 228: $(LINK) $(LFLAGS) -o $(TARGET) $(OBJECTS) $(OBJCOMP) $(LIBS)
How do i properly solve this issue?
I am using qt 6.2
Since this is a fresh unmodified project the .pro is also at default
QT += quick
CONFIG += c++11
# You can make your code fail to compile if it uses deprecated APIs.
# In order to do so, uncomment the following line.
#DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000 # disables all the APIs deprecated before Qt 6.0.0
SOURCES += \
main.cpp
RESOURCES += qml.qrc
# Additional import path used to resolve QML modules in Qt Creator's code model
QML_IMPORT_PATH =
# Additional import path used to resolve QML modules just for Qt Quick Designer
QML_DESIGNER_IMPORT_PATH =
# Default rules for deployment.
qnx: target.path = /tmp/$${TARGET}/bin
else: unix:!android: target.path = /opt/$${TARGET}/bin
!isEmpty(target.path): INSTALLS += target
It seems that you are building Qt6 on a Raspberry PI, which isn't an official supported platform.
Does removing atomic may result in some weird bugs?
No, that shouldn't be the case. A missing needed libraries would result in a link time error, not a runtime error.
Off course, since Raspberry PI isn't a supported platform, weird things may happen because it is not (well) tested on this platform, but this will not be related to removing the atomic library.
It seems to me a bug in the Makefile generation code, as library are normally specified using the -l option (which searches for the lib in the specified library search path), instead of providing the relative path to the library. As pointed out in the comments -latomic is also specified. So, atomic seems to be unneeded.
Why does Qt report the error at line 228?
Because this is the line that generates the full linker statement that is being executed. Line 43 is included by $(LIBS).
Tracking the root cause
Searching for atomic inside your (modified) source code of Qt may point you why this library is added to the LIBS variable. The best solution is to remove it at that place.
Relevant resources
Note that this issue is already discussed here.
I have some .c files that will compile to .o files. These .c files include a third party .h file. I would like to only include the third party folder as an include location for only the files that need it.
Here are pseudo code of what I am looking to do:
gcc -o one.o -Imypath/include one.c
gcc -o two.o -Imypath/include two.c
gcc -o thirdpartyinterface.o -Imypath/include -Ithirdpartypath/include thirdparty.c
gcc -o theexe one.o two.o thirdpartyinterface.o
Note that I only want the thirdpartypath included for my thirdpartyinterface code.
The problem I am facing is that scons seems to like to use one CPPPATH for all things compiled with the one env.
Upon reflection I think I could build my thirdpartyinterface as a .a if that would help.
You can include keyword arguments to do temporary overrides when calling a builder. Those are active only for the specific build and don't change the active environment. For example:
obj = Object('hello.c', CCFLAGS='-MD -MF hello.d', CPPPATH='.')
I am very much lost here and could really use some help.
I'm working on an Honours project for next year that involves a physics simulation using Bullet and Vulkan for rendering. After a few months of work I have most of the project functioning. It needs a lot of refactoring and cleaning which will be the next stage.
I have been using a makefile but wish to migrate to CMake for a few reasons. Mainly because it seems to be the standard and because I want to compile for different OS's in the future (I'm running Linux but may need to deploy on Windows or Mac). Finally, I was recompiling the whole project for even a small change, which was beginning to become a problem as I started Unit Testing more.
The old makefile is as follows :
ROOT_DIR:=$(shell dirname $(realpath $(firstword $(MAKEFILE_LIST))))
OWN_INCLUDES = \
-I$(ROOT_DIR)/src/Domain \
-I$(ROOT_DIR)/src/Vk \
-I$(ROOT_DIR)/src/Ui \
-I$(ROOT_DIR)/src/Service
ADD_INCLUDES = \
-I/opt/bullet3-master/src \
-I/opt/vk_mem_alloc \
-I/opt/stb_image \
-I/opt/tiny_obj_loader/ \
-I/opt/imgui-vulkan/
BULLET_INCLUDE_PATHS_LIBS = -L/opt/bullet3-master/src/BulletCollision/ \
-L/opt/bullet3-master/src/BulletDynamics/ \
-L/opt/bullet3-master/src/LinearMath/ \
-lBulletDynamics -lBulletCollision -lLinearMath
VULKAN_SDK_PATH = /opt/Vulkan_SDK/1.2.162.1/x86_64
CFLAGS = -std=c++17 -I$(VULKAN_SDK_PATH)/include $(OWN_INCLUDES) $(ADD_INCLUDES)
LDFLAGS = -L$(VULKAN_SDK_PATH)/lib `pkg-config --static --libs glfw3` -lvulkan $(BULLET_INCLUDE_PATHS_LIBS)
IMGUI_CPP_PATHS = /opt/imgui-vulkan/*.cpp
OWN_CPP_PATHS = src/*.cpp src/Domain/*.cpp src/Vk/*.cpp src/Ui/*.cpp src/Service/*.cpp
###### Unit Testing Paths
UNIT_TEST_INCLUDE = -I/opt/catch-header/
UNIT_TESTS_PATH = $(ROOT_DIR)/unit_tests/*.cpp
VulkanRun: $(OWN_CPP_PATHS) $(IMGUI_CPP_PATHS)
g++ $(CFLAGS) -o VulkanRun $(OWN_CPP_PATHS) $(IMGUI_CPP_PATHS) $(LDFLAGS)
Unit_Test: $(UNIT_TESTS_PATH) src/Domain/*.cpp src/Vk/*.cpp src/Ui/*.cpp src/Service/*.cpp $(IMGUI_CPP_PATHS)
g++ $(UNIT_TEST_INCLUDE) $(CFLAGS) -o Unit_Test $(UNIT_TESTS_PATH) src/Domain/*.cpp src/Vk/*.cpp src/Ui/*.cpp src/Service/*.cpp $(IMGUI_CPP_PATHS) $(LDFLAGS)
VulkanDebug: $(OWN_CPP_PATHS) $(IMGUI_CPP_PATHS)
g++ $(CFLAGS) -g -o VulkanDebug $(OWN_CPP_PATHS) $(IMGUI_CPP_PATHS) $(LDFLAGS)
VulkanOpt: $(OWN_CPP_PATHS) $(IMGUI_CPP_PATHS)
g++ $(CFLAGS) -O3 -o VulkanOpt $(OWN_CPP_PATHS) $(IMGUI_CPP_PATHS) $(LDFLAGS)
.PHONY: test clean
run: VulkanRun
LD_LIBRARY_PATH=$(VULKAN_SDK_PATH)/lib
VK_LAYER_PATH=$(VULKAN_SDK_PATH)/etc/vulkan/explicit_layer.d
./VulkanRun
test: Unit_Test
LD_LIBRARY_PATH=$(VULKAN_SDK_PATH)/lib
VK_LAYER_PATH=$(VULKAN_SDK_PATH)/etc/vulkan/explicit_layer.d
./Unit_Test
debug: VulkanDebug
LD_LIBRARY_PATH=$(VULKAN_SDK_PATH)/lib
VK_LAYER_PATH=$(VULKAN_SDK_PATH)/etc/vulkan/explicit_layer.d
optimise: VulkanOpt
LD_LIBRARY_PATH=$(VULKAN_SDK_PATH)/lib
VK_LAYER_PATH=$(VULKAN_SDK_PATH)/etc/vulkan/explicit_layer.d
./VulkanOpt
7 clean:
rm -f VulkanRun
rm -f Unit_Test
rm -f VulkanDebug
rm -f VulkanOpt
I installed cmake using the latest install script for 3.21.0.
I created a CMakeLists.txt in the root of the project as follows :
cmake_minimum_required(VERSION 3.21.0)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++17")
project(LanderSim)
file(GLOB_RECURSE SOURCES "src/**.cpp")
add_executable(main ${SOURCES})
find_package(Bullet CONFIG REQUIRED)
if (BULLET_FOUND)
include_directories(${BULLET_INCLUDE_DIRS})
target_link_libraries(main PRIVATE LinearMath Bullet3Common BulletDynamics BulletSoftBody)
endif (BULLET_FOUND)
After many hours of trying I decided to try vcpkg. Following the install instructions from bullet :
git clone https://github.com/Microsoft/vcpkg.git
cd vcpkg
./bootstrap-vcpkg.sh
./vcpkg integrate install
./vcpkg install bullet3
This resulted in errors of
CMake Error at CMakeLists.txt:11 (find_package):
Could not find a package configuration file provided by "Bullet" with any
of the following names: BulletConfig.cmake bullet-config.cmake
Looking in CMakeCache.txt i see "Bullet_DIR:PATH=Bullet_DIR-NOTFOUND"
I found the BulletConfig.make file in "/home/ash/vcpkg/installed/x64-linux/share/bullet3" and in "/home/ash/vcpkg/packages/bullet3_x64-linux/share/bullet3" and set the MakeCache.txt var Bullet_DIR:PATH to these variables (tested one at a time).
Running again I get CMake set_and_check() function not recognised. Or something to that effect. Looking in the BulletConfig.make file I see these set_and_check() functions aren't recognised by the linter. I cant find any information about them being deprecated online but I assume this is the case. So I change to set() and CMake then succeeds and builds its files.
Running make I then get an error.
fatal error: btBulletDynamicsCommon.h: No such file or directory,
#include <btBulletDynamicsCommon.h>
I tried prepending bullet/ to the include path as others had this issue but it causes the same error.
So I must be doing something wrong and I'm obviously not understanding the process that CMake uses to add includes and link libraries. I'm sure, given the popularity of CMake, that there must be something obvious. But I've spent about 10 hours over a few days searching and trying different variations and I'm starting to get very frustrated.
I've bounced off CMake before (hence why I was working with a makefile for months), but I'm determined to do this properly. I just could really use some help if anyone knows how to get CMake to generate a makefile that can see a package installed with vcpkg.
Or indeed if the vcpkg of Bullet is out of date, then a way to link and include it with CMake alone would be great. I just thought vcpkg would be easier as it provides a cleaner file structure by default as well as a CMake config file.
Thanks.
EDIT1
I've used 'cmake .' and 'cmake . -DCMAKE_TOOLCHAIN_FILE=/home/ash/vcpkg/scripts/buildsystems/vcpkg.cmake' to build the makefile. Both result in the same missing headers errors when calling make.
EDIT2
All CMake files were removed from the project (except CMakeLists.txt) before each call to cmake to ensure no values were stored there.
EDIT3
Poked around a bit more. Here is the BulletConfig.cmake file :
#
# BulletConfig.cmake(.in)
#
# Use the following variables to compile and link against Bullet:
# BULLET_FOUND - True if Bullet was found on your system
# BULLET_USE_FILE - The file making Bullet usable
# BULLET_DEFINITIONS - Definitions needed to build with Bullet
# BULLET_INCLUDE_DIR - Directory where Bullet-C-Api.h can be found
# BULLET_INCLUDE_DIRS - List of directories of Bullet and it's dependencies
# BULLET_LIBRARIES - List of libraries to link against Bullet library
# BULLET_LIBRARY_DIRS - List of directories containing Bullet' libraries
# BULLET_ROOT_DIR - The base directory of Bullet
# BULLET_VERSION_STRING - A human-readable string containing the version
set(PACKAGE_PREFIX_DIR /home/ash/installed/x64-linux)
set ( BULLET_FOUND 1 )
set ( BULLET_USE_FILE "${PACKAGE_PREFIX_DIR}/share/bullet3/UseBullet.cmake" )
set ( BULLET_DEFINITIONS "" )
set ( BULLET_INCLUDE_DIR "${PACKAGE_PREFIX_DIR}/include/bullet" )
set ( BULLET_INCLUDE_DIRS "${PACKAGE_PREFIX_DIR}/include/bullet" )
set ( BULLET_LIBRARIES "LinearMath;Bullet3Common;BulletInverseDynamics;BulletCollision;BulletDynamics;BulletSoftBody" )
set ( BULLET_LIBRARY_DIRS "${PACKAGE_PREFIX_DIR}/lib" )
set ( BULLET_ROOT_DIR "${PACKAGE_PREFIX_DIR}" )
set ( BULLET_VERSION_STRING "3.17" )
# Load targets
if(NOT TARGET Bullet3Common)
file(GLOB CONFIG_FILES "${PACKAGE_PREFIX_DIR}/share/bullet3/*Targets.cmake")
foreach(f ${CONFIG_FILES})
include(${f})
endforeach()
set(_DIR)
endif()
As stated before a few of the set functions were set_and_check(). So I changed to set() as apparently cmake 3.21 has no set_and_check() function. After a little testing by printing message(), i found that PACKAGE_PREFIX_DIR was not being set anywhere. So that is why I've set it explicitly in this file. The variables are now set correctly as reported by message() in the CMakeLists.txt file. But still it make cannot find the header files.
EDIT4
I created an empty project and ran through each library I wanted to include. Everything works except for Bullet3. However it does now see the header files. What changed between the two CMakeFiles? Nothing as far as I can tell. I'll need to find out because I have to port this project over but in the meantime this is another issue with the package.
from /home/ash/projects/C++/CMakeImportTests/src/main.cpp:22:
/home/ash/vcpkg/installed/x64-linux/include/bullet/BulletCollision/CollisionDispatch/btCollisionWorld.h:77:10:
fatal error: LinearMath/btVector3.h: No such file or directory
77 | #include "LinearMath/btVector3.h"
I think this is the same issue as described #7877
If i remove all includes of Bullet but leave the CMakeList.txt untouched, we get this error:
[ 50%] Building CXX object CMakeFiles/main.dir/src/main.cpp.o
[100%] Linking CXX executable main
/usr/bin/ld: cannot find -lLinearMath
/usr/bin/ld: cannot find -lBullet3Common
/usr/bin/ld: cannot find -lBulletDynamics
/usr/bin/ld: cannot find -lBulletSoftBody
collect2: error: ld returned 1 exit status
make[2]: *** [CMakeFiles/main.dir/build.make:104: main] Error 1
make[1]: *** [CMakeFiles/Makefile2:83: CMakeFiles/main.dir/all] Error 2
make: *** [Makefile:91: all] Error 2
Is this a clue that some environment variable is not set?
EDIT5
There seems to be an ordering dependency for the target_link_library call. The suggested usage is:
target_link_libraries(main PRIVATE LinearMath Bullet3Common BulletDynamics BulletSoftBody)
Checking bullet.pc in the libs/ directory i found
Libs: -L${libdir} -lBulletSoftBody -lBulletDynamics -lBulletCollision -lLinearMath
So I tried rearranging and following the pattern:
target_link_libraries(main PRIVATE BulletSoftBody BulletDynamics BulletCollision Bullet3Common LinearMath)
Additionally there was also a need to manually link directories.
target_link_directories(main PRIVATE ${BULLET_LIBRARY_DIRS})
This now compiles without error in my test project. It seems LinearMath must be after most of the other libraries (although it can be before Bullet3Common it seems).
For some reason it's still not finding the header files when I copy the exact same CMake commands over to my main project. So I'm not free of this yet.
I should say that I was able to remove the change I made to BulletConfig.cmake of setting PACKAGE_PREFIX_DIR statically.
So just to recap my issue. A small test project works and I can use bullet and number of other libraries that I use in my main project. But if i copy this working CMakeLists.txt to my main project it can no longer find the headers and throws this error :
btBulletDynamicsCommon.h: No such file or directory
8 | #include <btBulletDynamicsCommon.h>
Bullet_DIR:PATH=/home/ash/vcpkg/installed/x64-linux/share/bullet3 is the same in both cases.
After all that.
The set_and_include() error is a known issue and mathisloge over at vcpkg git said the Bullet package needs to be updated. The workaround is to change the calls to set().
The ordering of the target libraries is important. The suggested way in the Bullet vcpkg package is :
target_link_libraries(main PRIVATE LinearMath Bullet3Common BulletDynamics BulletSoftBody)
But this fails to compile. It should be:
target_link_libraries(main PRIVATE BulletSoftBody BulletDynamics BulletCollision Bullet3Common LinearMath)
Also had to tell cmake the link directories using :
target_link_directories(main PRIVATE ${BULLET_LIBRARY_DIRS})
Then I still had header missing errors. But after a restart things just started working again. Hopefully there is enough here to help someone if they hit similar problems.
I am using autotools to configure and build my project which uses dlopen and its friends.
I've got the following snippet in my root configure.ac:
AC_SEARCH_LIBS([dlopen], [dl dld], [], [
AC_MSG_ERROR([unable to find the dlopen() function])
])
which I got from https://autotools.io/autoconf/finding.html
The library is found by autotools:
checking for library containing dlopen... -ldl
However, the library doesn't appear to get added to $(LIBS) because:
a_out_LDADD=-ldl
works (i.e. project compiles, and runs), and
a_out_LDADD=$(LIBS)
does not (i.e. undefined reference to 'dlopen')
What am I missing?
(Full disclosure, I'm the author of the linked documentation.)
Are you sure the LIBS variable is not getting somehow clobbered? You can check config.log to see what the final output is. I think the most common problem with this is a later line that goes LIBS=${SOMEDEPS_LIBS} without prepending the old LIBS value.
Also you should not need to do _LDADD=$(LIBS) because the latter is added by default to all linking commands.
I am trying to get PhysX working using Ubuntu.
First, I downloaded the SDK here:
http://developer.download.nvidia.com/PhysX/2.8.1/PhysX_2.8.1_SDK_CoreLinux_deb.tar.gz
Next, I extracted the files and installed each package with:
dpkg -i filename.deb
This gives me the following files located in /usr/lib/PhysX/v2.8.1:
libNxCharacter.so
libNxCooking.so
libPhysXCore.so
libNxCharacter.so.1
libNxCooking.so.1
libPhysXCore.so.1
Next, I created symbolic links to /usr/lib:
sudo ln -s /usr/lib/PhysX/v2.8.1/libNxCharacter.so.1 /usr/lib/libNxCharacter.so.1
sudo ln -s /usr/lib/PhysX/v2.8.1/libNxCooking.so.1 /usr/lib/libNxCooking.so.1
sudo ln -s /usr/lib/PhysX/v2.8.1/libPhysXCore.so.1 /usr/lib/libPhysXCore.so.1
Now, using Eclipse, I have specified the following libraries (-l):
libNxCharacter.so.1
libNxCooking.so.1
libPhysXCore.so.1
And the following search paths just in case (-L):
/usr/lib/PhysX/v2.8.1
/usr/lib
Also, as Gerald Kaszuba suggested, I added the following include paths (-I):
/usr/lib/PhysX/v2.8.1
/usr/lib
Then, I attempted to compile the following code:
#include "NxPhysics.h"
NxPhysicsSDK* gPhysicsSDK = NULL;
NxScene* gScene = NULL;
NxVec3 gDefaultGravity(0,-9.8,0);
void InitNx()
{
gPhysicsSDK = NxCreatePhysicsSDK(NX_PHYSICS_SDK_VERSION);
if (!gPhysicsSDK)
{
std::cout<<"Error"<<std::endl;
return;
}
NxSceneDesc sceneDesc;
sceneDesc.gravity = gDefaultGravity;
gScene = gPhysicsSDK->createScene(sceneDesc);
}
int main(int arc, char** argv)
{
InitNx();
return 0;
}
The first error I get is:
NxPhysics.h: No such file or directory
Which tells me that the project is obviously not linking properly. Can anyone tell me what I have done wrong, or what else I need to do to get my project to compile? I am using the GCC C++ Compiler. Thanks in advance!
It looks like you're confusing header files with library files. NxPhysics.h is a source code header file. Header files are needed when compiling source code (not when linking). It's probably located in a place like /usr/include or /usr/include/PhysX/v2.8.1, or similar. Find the real location of this file and make sure you use the -I option to tell the compiler where it is, as Gerald Kaszuba suggests.
The libraries are needed when linking the compiled object files (and not when compiling). You'll need to deal with this later with the -L and -l options.
Note: depending on how you invoke gcc, you can have it do compiling and then linking with a single invocation, but behind the scenes it still does a compile step then a link step.
EDIT: Extra explanation added...
When building a binary using a C/C++ compiler, the compiler reads the source code (.c or .cpp files). While reading it, there are frequently #include statements that are used to read .h files. The #include statements give the names of files that must be loaded. Those exact files must exist in the include path. In your case, a file with the exact name "NxPhysics.h" must be found somewhere in the include path. Typically, /usr/include is in the path by default, and so is the current directory. If the headers are somewhere else such as a subdirectory of /usr/include, then you always need to explicitly tell the compiler where to look using the -I command-line switches (or sometimes with environment variables or other system configuration methods).
A .h header file typically includes data structure declarations, inline function definitions, function and class declarations, and #define macros. When the compilation is done, a .o object file is created. The compiler does not know about .so or .a libraries and cannot use them in any way, other than to embed a little bit of helper information for the linker. Note that the compiler also embeds some "header" information in the object files. I put "header" in quotes because the information only roughly corresponds to what may or may not be found in the .h files. It includes a binary representation of all exported declarations. No macros are found there. I believe that inline functions are omitted as well (though I could be wrong there).
Once all of the .o files exist, it is time for another program to take over: the linker. The linker knows nothing of source code files or .h header files. It only cares about binary libraries and object files. You give it a collection of libraries and object files. In their "headers" they list what things (data types, functions, etc.) they define and what things they need someone else to define. The linker then matches up requests for definitions from one module with actual definitions for other modules. It checks to make sure there aren't multiple conflicting definitions, and if building an executable, it makes sure that all requests for definitions are fulfilled.
There are some notable caveats to the above description. First, it is possible to call gcc once and get it to do both compiling and linking, e.g.
gcc hello.c -o hello
will first compile hello.c to memory or to a temporary file, then it will link against the standard libraries and write out the hello executable. Even though it's only one call to gcc, both steps are still being performed sequentially, as a convenience to you. I'll skip describing some of the details of dynamic libraries for now.
If you're a Java programmer, then some of the above might be a little confusing. I believe that .net works like Java, so the following discussion should apply to C# and the other .net languages. Java is syntactically a much simpler language than C and C++. It lacks macros and it lacks true templates (generics are a very weak form of templates). Because of this, Java skips the need for separate declaration (.h) and definition (.c) files. It is also able to embed all the relevant information in the object file (.class for Java). This makes it so that both the compiler and the linker can use the .class files directly.
The problem was indeed with my include paths. Here is the relevant command:
g++ -I/usr/include/PhysX/v2.8.1/SDKs/PhysXLoader/include -I/usr/include -I/usr/include/PhysX/v2.8.1/LowLevel/API/include -I/usr/include/PhysX/v2.8.1/LowLevel/hlcommon/include -I/usr/include/PhysX/v2.8.1/SDKs/Foundation/include -I/usr/include/PhysX/v2.8.1/SDKs/Cooking/include -I/usr/include/PhysX/v2.8.1/SDKs/NxCharacter/include -I/usr/include/PhysX/v2.8.1/SDKs/Physics/include -O0 -g3 -DNX_DISABLE_FLUIDS -DLINUX -Wall -c -fmessage-length=0 -MMD -MP -MF"main.d" -MT"main.d" -o"main.o" "../main.cpp"
Also, for the linker, only "PhysXLoader" was needed (same as Windows). Thus, I have:
g++ -o"PhysXSetupTest" ./main.o -lglut -lPhysXLoader
While installing I got the following error
*
dpkg: dependency problems prevent configuration of libphysx-dev-2.8.1:
libphysx-dev-2.8.1 depends on libphysx-2.8.1 (= 2.8.1-4); however:
Package libphysx-2.8.1 is not configured yet.
dpkg: error processing libphysx-dev-2.8.1 (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
*
So I reinstalled *libphysx-2.8.1_4_i386.deb*
sudo dpkg -i libphysx-2.8.1_4_i386.deb