We're building a online-store/site for a winery, and they have a matrix/table of shipping costs to different regions (in Australia).
In Exp-resso Store 1.6.0, is there anyway of setting up a post-code for a specific shipping cost?
i.e. postcode= 2000-2249, 2555-2574 = $10 + $1/kg. 1250-1263 = $12 +$1.1/kg
Additional info: The deliveries are technically through AusPost, but using their "Wine Delivery Service" which doesn't match their normal parcel delivery stuff, so we can't use the AusPost plugin/API :(
There's no way to do this from the control panel. However, you can easily write your own shipping calculator using PHP.
An example of a simple custom shipping plugin is here:
https://gist.github.com/2176462
Related
I'm a newbie for TradingView and have been learning a lot. I'm developing a strategy with backtesting using pine-script language however what confusing me, is how to use the same strategy for multiple coins.
The strategy is mainly developed for Binance Futures trading not sure if possible to apply it to other Exchangers.
So I wanna setup alerting system for multiple coins to be connected to 3comma Bot or Finandy to execute a trade based on the setup parameter.
My questions are.
If I wanna use certain candle types like Hiken Ashi should that be included in the code or just select it in the chart and it will be read by the strategy automatically?
Should I include the coins in the script or I should select them one by one in the chart and then setup an alert per coin?
Should I create one alert per one coin per chart or I should have multiple charts per each coin to setup an alert?
Should the timeframe also be defined in the code or the chart can do the job?
Sorry for many questions, I'm trying to understand the process well.
For multiple coins, the easiest way is to attach your strategy to each and every coin on Tradingview you want to trade with. This way you can backtest each on their respective chart.
If you create a strategy for say BINANCE:BTCUSDT and think of using this strategy on different exchange, you can do it, but first I suggest test it on BINANCE:BTCPERP and see for yourself how the same strategy can show a wildly different result (even though BTCUSDT and BTCPERP should be moving the same).
For a complex solution you can create a single script that uses multiple securities, but you won't be able to backtest that with simple approach, you would have to write your own gain/loss calculator, and you are not there yet.
I was going down the same road, my suggestions are:
create an input for the coin you want to trade (that will go into an input variable)
abstract the alert message off of the strategy.entry() command, that is, construct the alert message in a way you can replace values with variables in it (like the above selected coin)
3Commas needs a Bot ID to start/stop a bot, abstract that off as well, and you will have a good boilerplate code you can reuse many times
as a good practice (stolen from Kubernetes) besides the human readable name, I give a 5 letter identifier to every one of my bots, for easy recognition
A few examples. The below will create a selector for a coin and the Bot ID that is used to trade that coin. The names like 'BIN:GMTPERP - osakr' are entirely my making, they act as a Key (for a key/value pair):
symbol_choser = input.string(title='Ticker symbol', defval='BTC-PERP - aktqw', options=[FTX_Multi, 'FTX:MOVE Single - pdikr', 'BIN:GMTPERP - osakr', 'BIN:GMTPERP - rkwif', 'BTC-PERP - aktqw', 'BTC-PERP - ikrtl', 'BTC-PERP - cbdwe', 'BTC-PERP', 'BAL-PERP', 'RUNE-PERP', 'Paper Multi - fjeur', 'Paper Single - ruafh'], group = 'Bot settings')
exchange_symbol = switch symbol_choser // if you use Single Pair bots on 3Commas, the Value should be an empty string
'BIN:GMTPERP - osakr' => 'USDT_GMTUSDT'
'BTC-PERP - cbdwe' => 'USD_BTC-PERP'
'Paper Multi - fjeur' => 'USDT_ADADOWN'
bot_id = switch symbol_choser
'BIN:GMTPERP - osakr' => '8941983'
'BTC-PERP - cbdwe' => '8669136'
'Paper Multi - fjeur' => '8246237'
And now you can combine the above parts into two Alerts, for starting/stopping the bot:
alertMessage_Enter = '{"message_type": "bot", "bot_id": ' + bot_id + ', "email_token": "12345678-4321-abcd-xyzq-132435465768", "delay_seconds": 0, "pair": "' + exchange_symbol + '"}'
alertMessage_Exit = '{"action": "close_at_market_price", "message_type": "bot", "bot_id": ' + bot_id + ', "email_token": "12345678-4321-abcd-xyzq-132435465768", "delay_seconds": 0, "pair": "' + exchange_symbol + '"}'
exchange_symbol is the proper exchange symbol you need to provide to your bot, you can get help on the 3Commas' bot page (they have pre-crafted the HTTP requests you need to use for certain actions).
bot_id is the ID of your Bot, that is straightforward.
The above solution does not handle Single coin bots, their trigger message has a different structure.
Whenever you can, use Multi coin bots as they can act as a Single bot with two exception:
if you have a long spanning strategy and when you start a bot, you should be already in a trade, you can manually start a Single bot, but you cannot start a Multi coin bot (as there is no way to provide the coin info on which to start the trade)
if you are trading a derivative like FTX's MOVE contracts and your script is attached to the underlying BTC Futures. MOVE contracts changes name every day (the date is in their name, like: BTC-MOVE-0523) so you would need delete an alert, update and reapply the alert every day, etc. Instead, if your script is on the BTC-PERP then you can use a Single coin bot which does not expect a coin name in the alert message so it will start/stop the Bot on whatever coin it is connected to, then you need to change the coin name every day only in the Bot settings and never touch the Alert.
To summarize on your questions:
Do not include chart type in code (that is not even an embeddable data), just apply your code to whatever chart you want to use. Hint: never use Heikin-Ashi for trading. You can, but you will pay for it dearly (everyone tries, even against warnings, no worries)
Set up them one-by-one, so you can backtest them
No, set the timeframe on the chart. Later, when you will be more experienced you will be able to abstract the current timeframe (whatever it is) away and write code that is timeframe-agnostic. But that's hard and make your code less readable.
I am trying to pull report from google ad manager using API
report_job = {
'reportQuery': {
'dimensions': ['AD_EXCHANGE_DATE', 'AD_EXCHANGE_COUNTRY_NAME'],
'columns': ['AD_EXCHANGE_AD_REQUESTS', 'AD_EXCHANGE_IMPRESSIONS',
'AD_EXCHANGE_ESTIMATED_REVENUE','AD_EXCHANGE_AD_ECPM'],
'dateRangeType': 'LAST_WEEK',
'timeZoneType': 'AD_EXCHANGE', # Run in pacific time
'adxReportCurrency': 'USD'
}
}
I suspect the downloaded report has very wired ECPM and Revenue values. as below
Please help if i am doing something wrong, as the ECPM has to be very low and the revenue as well.
"Money values are always specified in terms of micros which are a millionth of the fundamental currency unit. For US dollars, $1 is 1,000,000 micros."
From the AdManager API official documentation here: https://developers.google.com/ad-manager/api/reference/v202008/LineItemService.Money#microAmount
i want to transfer a call from first executive to second executive when customer call to first executive by mistake? How first executive can map customer to second executive by pressing a key by using asterisk technology?
Default transfer is *2. For exact code check features.conf
You also have dialplan Transfer application you can map on any other extension.
You have Transfer ami command usable via asterisk managment interface(AMI)
The question is a bit vague, but since you put freepbx on the tags, I suppose you are using freepbx generated dialplan.
If I understand well, when a certain inbound context calls executive1 you want
1) them to be automagically redirected on executive2 before executive1 answers
or
2) executive1 answers, realizes that call is wrong and blind-transfers call to executive2 pressing a single button (= DTMF).
CASE 1 - Automatic redirection
Edit your /etc/asterisk/extension_custom.conf
[your inbound context]
exten => <executive 1 number>,Goto(your inbound context, executive2 number, 1)
You can find the name of your inbound context in the freepbx automatic generated dialplan, or in the freepbx GUI
CASE2 - In call transfer
Refer to this post to define a new feature code for in-call transfer. Unfortunately your feature code will be likely some #digit
Associate the application
Goto(your inbound context, executive2 number, 1)
to the feature code
Hope this will help.
Let me stress that I am not a programmer but I like messing around with things. I've been using #ifttt and #nest for years and recently started using #smartthings to do cool things in my house.
I wanted to power off devices such as my lights and water heater based on leaving my house. Rather than having this depend on one device such as a phone or keyfoob, I wanted to use the nest "auto-away" feature.
Auto-away doesn't appear to be exposed to #ifttt or #smartthings. I've asked #nestsupport and they told me to come here :-o.
Does anyone from nest developer team know when developers and other products will be able to consume this from he nest device? Its a real shame that after several years this isn't exposed yet. Not only that but it could be an additional selling point to integrate and turn on/off items in your house.
Thank
I'm not from the Nest developer team, but I've played around with the Nest API in the past, and use it to plot my energy usage.
The 'auto away' information is already accessible in the API, and looks to be used in a number of IFTTT recipes:
https://ifttt.com/recipes/search?q=auto+away&ac=false
Within the (JSON) data received back in the API, the 'auto away' status is accessible via;
shared->{serial_number}->auto_away
This is set as a boolean (0 or 1).
If you like messing around with code, and know any PHP, then this PHP class for the Nest API is very useful at grabbing all information etc;
https://github.com/gboudreau/nest-api
Auto-Away is and always has been readable https://developer.nest.com/documentation/cloud/api-overview#away
There are a few ways you could go about doing this, but if you're writing up a SmartApp just for your own uses, I'd suggest piggybacking off of one of the existing device types for the Nest on SmartThings. As a quick example, I'll use the one that I use:
https://github.com/bmmiller/device-type.nest/blob/master/nest.devicetype.groovy
After line 96, this is to expose the status to any SmartApp you may write:
attribute "temperatureUnit", "string"
attribute "humiditySetpoint", "number"
attribute "autoAwayStatus", "number" // New Line
Now, you'll want to take care of getting the data in the existing poll() method, currently starting at line 459.
After line 480, to update the attribute
sendEvent(name: 'humidity', value: humidity)
sendEvent(name: 'humiditySetpoint', value: humiditySetpoint, unit: Humidity)
sendEvent(name: 'thermostatFanMode', value: fanMode)
sendEvent(name: 'thermostatMode', value: temperatureType)
sendEvent(name: 'autoAwayStatus', value: data.shared.auto_away) // New Line
This will expose a numerical value for the auto_away status.
-1 = Auto Away Not Enabled
0 = Auto Away Off
1 = Auto Away On
Then, in your SmartApp you write, where you include an input of type thermostat like this:
section("Choose thermostat... ") {
input "thermostat", "capability.thermostat"
}
You will be able to access the Auto Away status by referring to
thermostat.autoAwayStatus
From anywhere in your code where you can do something like
if (thermostat.autoAwayStatus == 1) {
// Turn off everything
}
Is there any way to get google maps directions from A to B with considering traffic at the moment of calling the function?
This code below works fine if it is empty road:
var gm = require("googlemaps");
gm.directions("from", "where go to" , function ( err, data ) {
console.log(data.routes[0].legs[0].distance);
console.log(data.routes[0].legs[0].duration);
}, "false");
I am new to google maps, so please any thought to spare?
A quick look at the documentation gives you a clear answer:
durationInTraffic (optional) specifies whether the DirectionsLeg result should include a duration that takes into account current traffic conditions. This feature is only available for Maps for Business customers. The time in current traffic will only be returned if traffic information is available in the requested area.