I am currently working on a project based on varnish..
we write vcl and vmod. But the project needs to check the request body.
How can I get the post request body in VCL or vmod with a C function?
You can do almost everything you want with VCL/VMOD.
You should try to call a VMOD subroutine in vcl_recv, and then in C code, write something like below :
Use VRT_GetHdr(rec->s, HDR_REQ, "\017Content-Length:"); to read the body length
Use HTC_Read(rec->s->htc, body, bodylen);
And enjoy !
You should take a look at existing vmods https://www.varnish-cache.org/vmods, and be free to look into the varnish API sources.
I'm not sure you can.
Varnish generally only deals with Req/Resp headers.
The bodies are passed along without (much) modification.
I you do find a solution please let me know as I'm interested in this as well.
Related
Documentaion says:-
ResponseEntity<Mono> or ResponseEntity<Flux> -- this makes the response status and headers known immediately while the body is provided asynchronously at a later point. Whether the body is Mono or Flux depends on how many values the response has.
My usecase is I want the headers right away so that I can do some processes while I wait for the body.
Can anyone help me with a method that would make use of this ?
I'm trying to make a request with Content-Type x-www-form-urlencoded that works perfectly in postman but does not work in Azure Logic App I receive a Bad Request response for missing parameters, like I'd not send enything.
I'm using the Http action.
The body value is param1=value1¶m2=value2, but I tried other formats.
HTTP Method: POST
URI : https://xxx/oauth2/token
In Headers section, add the below content-type:
Content-Type: application/x-www-form-urlencoded
And in the Body, add:
grant_type=xxx&client_id=xxx&resource=xxx&client_secret=xxx
Try out the below solution . Its working for me .
concat(
'grant_type=',encodeUriComponent('authorization_code'),
'&client_id=',encodeUriComponent('xxx'),
'&client_secret=',encodeUriComponent('xxx'),
'&redirect_uri=',encodeUriComponent('xxx'),
'&scope=',encodeUriComponent('xxx'),
'&code=',encodeUriComponent(triggerOutputs()['relativePathParameters']['code'])).
Here code is dynamic parameter coming from the previous flow's query parameter.
NOTE : **Do not forget to specify in header as Content-Type ->>>> application/x-www-form-urlencoded**
Answering this one, as I needed to make a call like this myself, today.
As Assaf mentions above, the request indeed has to be urlEncoded and a lot of times you want to compose the actual message payload.
Also, make sure to add the Content-Type header in the HTTP action with value application/x-www-form-urlencoded
therefore, you can use the following code to combine variables that get urlEncoded:
concat('token=', **encodeUriComponent**(body('ApplicationToken')?['value']),'&user=', **encodeUriComponent**(body('UserToken')?['value']),'&title=Stock+Order+Status+Changed&message=to+do')
When using the concat function (in composing), the curly braces are not needed.
First of all the body needs to be:
{ param1=value1¶m2=value2 }
(i.e. surround with {})
That said, value1 and value2 should be url encoded. If they are a simple string (e..g a_b) then this would be find as is but if it is for exmaple https://a.b it should be converted to https%3A%2F%2Fa.b
The easiest way I found to do this is to use https://www.urlencoder.org/ to convert it. convert each param separately and put the converted value instead of the original one.
Here is the screenshot from the solution that works for me, I hope it will be helpful. This is example with Microsoft Graph API but will work with any other scenario:
How can I remove the Server HTTP response header in Yesod? I found code that's responsible for setting that header, but I don't know what to do next. I know that I can replace the header value with an empty string by using addHeader "Server" "", but I'd prefer to remove it entirely.
I made an issue on GitHub Warp repository and they changed it that when the server name is empty, the "Server" header is not sent. Therefore, the solution is to set the server name to an empty string using setServerName "". In my case I had to add this to the warpSettings function in Application.hs. Note that you have to use the Warp version which contains the fix (as of May 3 '17, it has not been released yet, but you can pull it directly from GitHub).
You must call the methods inside of the function you linked. That function will "The Date and Server header is added if not exist in HTTP response header" so you need to reimplement it if you don't want that behavior.
This is why people always say to keep your code modular and your functions small; this function is too big for your use case, and there is no specific smaller function that does exactly what you want (or else it would have been called by this function!)
I am writing a client side code in Visual C++ 2012 using C++ Rest SDK (codename "Casablanca").
I have a client created and wish to POST a text string to the server. However, when I send the following code, it is compiling but not sending sending the request.
When I remove everything after "methods::POST" and send a blank post request, then it is sent and received by the server.
Can you please guide me where the problem is. The documentation related to this function is available on Casablanca Documentation.
pplx::task<http_response>resp = client.request(methods::POST,L"",L"This is the random text that I wish to send", L"text/plain");
I think the usage you give here looks correct.
Is your Casablanca the latest version ? Please check that out from here : http://casablanca.codeplex.com/
If you are sure your measurement is accurate, you may want to create a minimal repro and file a bug here : http://casablanca.codeplex.com/workitem/list/basic
I was having a similar problem, all my POSTs was arriving in blank on server , after a few hours work above it, i found a possible solution.
I changed the default content type to application/x-www-form-urlencoded and I started to pass the values like this Example data=text1&data2=text2
client.request(methods::POST,L"",L"data=text1&data2=text2", L"application/x-www-form-urlencoded");
The body parameter must be a json::value.
I cannot comment yet so I have to put my thoughts in an answer. I solved this problem like this: There is an overload of the request method that takes as a parameter the content type so that you do not have to change the code.
m_client->request(methods::POST, L"/statuses/update.json?" + url_encode(data),L"",L"application/x-www-form-urlencoded");
Obviously you would have to implement the url_encode method but that is not difficult. There is a pretty good implementation in "Cassablanca". A search on this site will alos turn up some good examples.
I'm very new to LINUX working with node.js. Its just my 2nd day. I use node-curl for curl request. In the link below I have found example with Get request. Can anybody provide me a Post request example using node-curl.
https://github.com/jiangmiao/node-curl/blob/master/examples/low-level.js
You need to use setopt in order to specify POST options for a cURL request. The options you should start looking at first are CURLOPT_POST and CURLOPT_POSTFIELDS. From the libcurl documentation linked from node-curl:
CURLOPT_POST
A parameter set to 1 tells the library to do a regular HTTP post. This will also make the library use a "Content-Type: application/x-www-form-urlencoded" header. (This is by far the most commonly used POST method).
Use one of CURLOPT_POSTFIELDS or CURLOPT_COPYPOSTFIELDS options to specify what data to post and CURLOPT_POSTFIELDSIZE or CURLOPT_POSTFIELDSIZE_LARGE to set the data size.
Optionally, you can provide data to POST using the CURLOPT_READFUNCTION and CURLOPT_READDATA options but then you must make sure to not set CURLOPT_POSTFIELDS to anything but NULL. When providing data with a callback, you must transmit it using chunked transfer-encoding or you must set the size of the data with the CURLOPT_POSTFIELDSIZE or CURLOPT_POSTFIELDSIZE_LARGE option. To enable chunked encoding, you simply pass in the appropriate Transfer-Encoding header, see the post-callback.c example.
CURLOPT_POSTFIELDS
... [this] should be the full data to post in a HTTP POST operation. You must make sure that the data is formatted the way you want the server to receive it. libcurl will not convert or encode it for you. Most web servers will assume this data to be url-encoded.
This POST is a normal application/x-www-form-urlencoded kind (and libcurl will set that Content-Type by default when this option is used), which is the most commonly used one by HTML forms. See also the CURLOPT_POST. Using CURLOPT_POSTFIELDS implies CURLOPT_POST.
If you want to do a zero-byte POST, you need to set CURLOPT_POSTFIELDSIZE explicitly to zero, as simply setting CURLOPT_POSTFIELDS to NULL or "" just effectively disables the sending of the specified string. libcurl will instead assume that you'll send the POST data using the read callback!
With that information, you should be able add the following options to the low-level example to have it make a POST request:
var fieldsStr = '{}';
curl.setopt('CURLOPT_POST', 1); // true?
curl.setopt('CURLOPT_POSTFIELDS', fieldsStr);
You will need to tweak the contents of fieldsStr to match the format the server is expecting. Per the documentation you may also need to url-encode the data - which should be as simple as using encodeURIComponent according to this post.