I tried to install and setup a svn server using apache2,
I followed instructions on internet but while i tried to restart apache2 it shows the following error:
apache2: Syntax error on line 204 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/authz_svn.load: Cannot load /usr/lib/apache2/modules/mod_authz_svn.so into server: libsvn_repos-1.so.0: cannot open shared object file: No such file or directory
Action 'configtest' failed.
i checked the path but the file do exist,im not sure what is happening.
need some help thanks~
Based on your pathes, it looks like you are playing debian or ubuntu config. if I remember well, this module *mod_authz_svn.so* is available with libapache2-svn, so you need first to apt-get this module as root, and then to enable it (being in the directory /etc/apache2, *a2enmod my_module*) and reload your apache config (or restart apache).
The other way around is to load the module as a DSO. Then it's a different process.
Related
I'm running a Python 3.9/Django 3 app through Apache, connected through WSGI (4.9). Is WSGIScriptAliasMatch not supported any more in Apache? I had previously configured this in a virtual hosts file, /etc/apache2/sites-enabled/000-default-le-ssl.conf,
WSGIScriptAliasMatch ^/api/(.*) /var/www/html/web/directory/wsgi.py/$1 process-group=ssl_directory
but now when I restart Apache or check its config, I get this error complaining about the above line
$ sudo apachectl configtest
AH00526: Syntax error on line 41 of /etc/apache2/sites-enabled/000-default-le-ssl.conf:
Invalid option to WSGI script alias definition.
Action 'configtest' failed.
The Apache error log may have more information.
Is there another way to write WSGIScriptAliasMatch?
This occurred because my WSGI module got reset from version 4.9 to version 3.6, where "WSGIScriptAliasMatch" was not supported.
First of all, I'm pretty new to this all...
I am using Amazon web services and I have installed LAMP on Amazon linux using this.
When installing phpmyadmin, I was trying to grant access to all IP addresses (i know, not a good idea), so I tried adding Require all granted under # Apache 2.4 in phpmyadmin.conf file, I was using Mac's terminal, and I messed up the file while trying to learn how to add it, so now that I found how to add it, it is not working anymore... this the error I get:
Stopping httpd: [FAILED]
Starting httpd: AH00526: Syntax error on line 1 of /etc/httpd/conf.d/phpMyAdmin.conf:
Invalid command '# phpMyAdmin - Web based MySQL browser written in php', perhaps misspelled or defined by a module not included in the server configuration
[FAILED]
Is there anyway that I can just replace the phpMyAdmin.conf file to default and start editing it over?
or do I have to unistall and re install phpmyadmin all over again?
Thanks
Having just updated to the newest Windows 10 release (build 14316), I immediately started playing with WSL, the Windows Subsystem for Linux, which is supposed to run an Ubuntu installation on Windows.
Maybe I'm trying the impossible by trying to install Apache on it, but then someone please explain me why this won't be possible.
At any rate, during installation (sudo apt-get install apache2), I received the following error messages after the dependencies were downloaded and installed correctly:
initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: No such file or directory
runlevel:/var/run/utmp: No such file or directory
* Starting web server apache2 *
* The apache2 configtest failed.
Output of config test was:
mktemp: failed to create directory via template '/var/lock/apache2.XXXXXXXXXX': No such file or directory
chmod: missing operand after '755'
Try 'chmod --help' for more information.
invoke-rc.d: initscript apache2, action "start" failed.
Setting up ssl-cert (1.0.33) ...
Processing triggers for libc-bin (2.19-0ubuntu6.7) ...
Processing triggers for ureadahead (0.100.0-16) ...
Processing triggers for ufw (0.34~rc-0ubuntu2) ...
WARN: / is group writable!
Now, I understand that there seem to be some folders and files missing for Apache2 to work. Before I start changing anything that will mess with my Windows installation, I want to ask whether there's a different way? Also, should I worry about / being group writable or is this just standard Windows behaviour?
In order to eliminate this warning
Invalid argument: AH00076: Failed to enable APR_TCP_DEFER_ACCEP
Add this to the end of /etc/apache2/apache2.conf
AcceptFilter http none
Note the following in your output
failed to create directory via template '/var/lock/apache2.XXXXXXXXXX': No such file
I tried listing /var/lock. It points to /run/lock, which doesn't exist.
Create the directory with
mkdir -p /run/lock
The install should now work (you may need to clean the installation first)
You have to start bash.exe in administrator mode to avoid a lot of problems related to network.
i installed Lamp (Apache/MySQL/Php) without any problem :
Start bash.exe in administrator mode
type : sudo apt-get install lamp-server^
add these 2 lines in /etc/apache2/apache2.conf :
Servername localhost
AcceptFilter http none
then you can start apache :
/etc/init.d/apache2 start
Following the great advice here I edited apache2.conf and inserted the following to end of file after receiving all the various errors above and apache2 then worked great on the debian wsl package:
Servername localhost
AcceptFilter http none
AcceptFilter https none
I can't seem to get an asp site to run with ISPCONFIG3 at all. I am getting errors in the apache error.log like this:
Not running mod-mono-server.exe because no MonoApplications, MonoApplicationsConfigFile or MonoApplicationConfigDir specified.
Failed to connect to mod-mono-server after several attempts to spawn the process.
I think it has to do with my configuration somehow but I can't seem to figure out where. Thoughts?
Encountered this error today after installing apache2, mod-mono, etc in Ubuntu 19.04 on my laptop. Having just done it successfully on an AWS instance running Ubuntu 18.04, I was surprised that it didn't work here. By trial and error tweaking the mono-server config, apache2 config, the ASP.NET web app folder (with a simple index.aspx in it), and looking at the apache2 error logs after each change (after stopping/restarting apache2 each time!), I discovered that, in my case at least, this error was caused by the absence of a web.config file in the web app root folder; as soon as I created a simple skeleton web.config file, this error message went away.
Worth noting in passing is that the error message contains a typo: there should be an "s" for "Applications" in the keyword MonoApplicationConfigDir, like the other two keywords have. One of the things I tried was to alter the MonoApplicationsConfigDir statement that was present by default in my mono-server4-hosts.conf file by removing the "s" to match the error message, but that generated a different, fatal error that prevented apache2 from starting: systemctl status apache2.service showed "Invalid command 'MonoApplicationConfigDir'".
I have set up ubuntu server on an old pc with webmin as well. I am not sure what was going on but i restarted the server and when it boots it now get this when Apache tries to start.
* Starting web server apache2
apache2: Syntax error on line 237 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/000-default: No such file or directory
Action 'start' failed.
The Apache error log may have more information.
I have checked this file on this line and it looks like this:
# Include the virtual host configurations:
Include sites-enabled/
I have removed Apache and re installed it but not sure why it still fails.
As also answered by Qben, the issue was an invalid symlink in the sites-enabled folder. Removing the broken symlink and adding a valid one will fix the issue.
You do not have a default site enabled:
/etc/apache2/sites-enabled/000-default: No such file or directory
site-enabled should contain symlinks to files in site-available and I guess your 000-default symlink does not link to a real file in site-available.
I guess this Ubuntu guide might be of interest for you.
One of the reason may be that you might have some site that is not enabled.To check that
Go to /etc/apache2/sites-enabled
Out of many/some [sitename].conf files , one/some may be crossed
Delete those found crossed
Restart apache server
sudo service apache2 restart.
Hope this has helped you , but may be some other reason too. Thank you.