Is it possible to create lazy loading like pagination with richfaces? My idea would be to catch the event of scrolling on a specific page and then rerender a part of the page.
So the flow would be
create 10 search results on a search result page
if the user scrolls
Then reload the result region with 10 additional entries
An option would also be to create a Facebook like "more" bar and to rerender the region, when the user clicks on the button.
What do you guys think?
How about using the ScrollableDataTable ? Might not be what you want if your results are searchresults, but it might work still..
http://livedemo.exadel.com/richfaces-demo/richfaces/scrollableDataTable.jsf;?c=scrollableDataTable&tab=usage
If you want to automatically load more items as you scroll, you can create an anchor near the bottom of the page, and the detect when that anchor is visible, which will fire off an XHR request to re-load the component holding the results.
Related
My repeater has enough data where I see my pagination. When I view the detail transformation for any items after the first page, the history.back() button gives me the form submission error.
Short of hard coding the back button, what's the easiest solution to avoid this?
I assume the "history.back()" is your javascript? The pagination is most likely occurring through postback, and any navigation back will require that same post data being sent.
One option is you can make the pagination not postback, but instead URL based. In the "Paging" area of your repeater, set the Mode to "QueryString" and set a querystring key (like "page"). Try that!
Otherwise you will need to do a window.location = "/The/Previous/Url" so it won't event attempt a postback and will simply direct them to the page, but your page you were last on will be lost.
Wrap the webpart in an update panel. In the webpart you can check the box to do this very easy and leave the rest of your configurations the way they are. If other elements on the page require a postback or rely on that webparts values then you may have to wrap all of them in an update panel.
This is a more conceptual question, so I'm not initially submitting any code for it unless someone requests it.
On a current website of mine, I am using a Kendo UI grid to display a table of multiple pages. I also have a (Kendo UI) drop down list, allowing the user to filter rows by class (it reloads the page and makes the necessary edits through the controller).
My problem is this: when the user pages through the Kendo UI grid, it loads a new page and the filtering preferences do not persist. How can I make it either not reload the page(and do everything on the same page instead), or make the drop down box's value persist? Thanks, and tell me if there's any information that would be helpful for me to add!
CLARIFICATION: The functionality is all fine, the only issue is that the dropdownlist does not visually persist.
Actually you can bind both dropdownlist and grid to a single external datasource. This datasource will actually place a ajax call and get the records when the value in drop down changes. As the new records appear in datasource the grid can be refreshed or will automatically refresh without the page reload. Page reload doesn't look like a clean way to filter the grid.
Actually, I want to store some data in background page and the popup page just show that part of data say Data as a div element created in background page document.createElement("div"). Here, the background page will register some listeners to the tab update and change the Data elements accordingly. What the popup will do is to get that Data and appendit use the document.appendChild(Data).
(The purpose I intend is this will cause the popup changes immediately while the tab updage is triggered.)
However, the elements are shown as usual, what I am facing very headache is I have registered the onclick for the div object in backgroundpage as onclick="chrome.extension.getBackgroundPage().somefunc()". However, the first time, all the click will triger the right behavior but after the popup loses foucs and get focus again, all the click won't work.
I try to put something like change the onclick="somefunc()" and leave the func within the script of popup page. And there I want to log whether it is called by console.log("clicked"). Here, something unbelievable happens, the function is succefully trigerred BUT the console is null here, I cannot even call chrome.extension.getBackgroundPage() as well.
Here are a list of questions, maybe very hard to express for me...
1. Whether I can reuse the DOM element from the background page to the popup page directly by appendChild(chrome.extension.getBackgroundPage().getElementById()?
2.Will the onclick event registered in the background page still work in the popup pages?
3. What's the problem with the problem I am encountering? I have tried many ways to find out the reason but all in vain at last...
Best Regards,
If you need any more information, please let me know.
(PS: I am wonderning if it is called something like the event propogation, however, I am not an expert in this two pages communicating...)
I have a search dialog that I am popping up and filling with jquery templates. After they make a selection I set a value on the current page. As such I don't need hashTags or anything like that, I just need a pop-up dialog that I can open and close programatically. I am currently opening the dialog with
$.mobile.changePage(dialog, { transition: "slide", changeHash: false });
and closing it with
dialog.dialog('close');
However, in certain cases (when the page is navigated to), closing the dialog refreshes the current page.
Is there a better way to interact with this?
Update:
I think I figured out what is going on. So for some reason, jquery mobile usually keeps 2 pages loaded on the DOM - one of which is invisible, you can verify this by running $('[data-role=page]') in the console. One page is the page you're on, the other is the page that you initially navigated to. Not quite sure why they choose to do that, but there you have it.
So they treat dialogs as a page navigation with a different transition even if the dialog is already in the DOM. Therefore, if you go directly to the page and then trigger a dialog, modifying the current page and closing it works fine - because the original page is always loaded in the DOM. However if you go to another page, than navigate to the page that triggers the dialog, and THEN trigger the dialog it destroys the current page so that the pages in the DOM are the initial one and the dialog. In that case it reloads that dialog-launching page entirely and you never get a chance to make any modifications.
Jeez. How do I interact with the jqm dialog widget directly?
You can try two other things. Both should work:
1 set DomChache
How about overriding JQM to keep the page your are firing the dialog from in the DOM? The docs say you can set data-dom-chache and override cleaning the page from the DOM.
If it only happens when you load this page in via AJAX (vs. loading it directly) you could make DOM-keeping dependend on your trigger page having data-page-external, assign DOM-chache="true" only when the dialog is openend and remove it again once the dialog is closed.
2 override JQM
I had the same problem you described and got it to work like this (requires hacking into JQM though...):
// inside transitionPages function
if ( !$(toPage).jqmData('internal-page')
{fromPage.data( "page" )._trigger( "hide", null, { nextPage: toPage } );}
}
My problem was that pagechanging to certain pages (same as dialog) caused the preceding page (where the dialog fired from) to be removed from the DOM, so I had a blank screen (when trying to go back). I added data-internal-page="true" to the pages, which should keep the preceding page intact and added the if-clause in JQM.
So now pageHide (and DOMcleanup) only fires, if I'm not going to a page labelled with data-internal-page="true"
Cheers!
I think I was having a similar problem. What I wanted to do was based on certain parameters, pop a dialog window on load (with that content on the same page), which they can close and view the page that loaded.
I could get it to pop on load using load, or the pageshow events, but when I clicked close that sent you back to the previous page in history, instead of just closing the dialog.
//target your 1st page content, here its id=success
//the modal content is in a page id=dialog and data-role="dialog"
$('#success').live('pageshow',function(){
window.setTimeout(function(){
$.mobile.changePage('#dialog','pop',false,false);
},1);
}
Its a hack, and just allows the page load to beat the dialog so it gets stuck in history. Then the default dialog close behavior for the dialog works as expected. Talk about a PITA, if they took a little more for the JQuery UI dialog it would have made things a ton easier.
And regarding your question: Have you looked at Jquery Mobile Actionsheet plugin
If you don't really require a page to be loaded, that should be ok.
Also helpful could be Cagintranet iPad popover, although you have to tweak the design to be fullscreen on mobile devices. If you require CSS/Jquery to do that let me know (I'm using this in a JQM plugin I'm writing)
Hope that helps.
I have a website having frames. Clicking on button in one frame updates the pages to be loaded in other frames. Now when user press the back button few of the frames load previous pages. i want user not to move back to previous page.
I used the code history.forward() on onload event of all my pages.
This works fine when back is pressed. User got navigated to most recent page always.
But the case is suppose user navigate to number of pages by clicking on button in first frame which updates the pages to be loaded in other frames. After navigation user select a page from the list of browsing history, then it is move forward to only one page, not the last page he was viewing.
This Happens in IE.
In firefox it works fine. User can select any page from the browsing history, he is relocated to most recent page
My opinion is, you should review your concept, because you want to "reconfigure" the browser's navigation buttons. Disabling browser features is in my eyes old fashioned.
I used the code history.forward() on onload event
Try following this way:
In the head section, insert the javascript:
var historySize = history.length;
Then replace in onload event: history.forward() by history.go(historySize - 1). A positive value means move forward to a particular position in browser's history object (array).
I cannot guarantee that it will work, but it is worth to try out.
write this code between script tags
history.pushState(null, null, location.href);
window.onpopstate = function () {
history.go(1);
};