I have little knowlage of excel and I'm trying to configure an excel table so I can get the consumption of gas for each vehicle in a company, but all the data is introduced in only one table, how can I calculate the increase of km's of each vehicle to then be able to calculate the consumption?
The problem is that I don't know how to make the formula differenciate for each different plate.
The table is the following:
**A B C D E F G**
**1** Date Plate km Gas Signed Increased km's Consum
**2** 1/1/2018 0157-AAA 123456 50 YES
**3** 5/1/2018 0157-AAA 123789 20 NO
**4** 8/2/2018 0157-AAA 123987 30 NO
**5** 1/2/2018 0582-BBB 123456 40 YES
**6** 1/3/2018 0356-CCC 123456 30 NO
Another exemple:
Data Plate km Gas Increased km Consum %
3/5/2017 1111-AAA 150 20 150 13,33333333
7/5/2017 1111-AAA 400 30 250 12
7/5/2017 2222-BBB 50 10 50 20
7/5/2017 3333-CCC 20 5 20 25
10/5/2017 2222-BBB 200 30 150 20
Each plate is a different vehicle
Gas is the amount of oil that the vehicle refills in L
The table is updated daily or every 2-3 days as it's manually filled
The problem is calculating the increased km's as they may be other plates in between in the same date.
Consum % = Gas/Increased km *100
I thought about just ordering the columns by date and by plate and apply a general formula to everything
Thanks
I think I finally "solved my problem", the formula with the one I work is based on a filter for the plates in order to get them ordered. then the formula is:
Increased km =IF(B2=B1;C2-C1;C2)
Related
I need to come up with a formula that gives me the closest match based on multiple criteria.
This only applies for those names with Valid = "N" (Column I), or else their own name is returned.
For example, Bob has the closest numbers combined to Susan for each day.
I rearranged all of the "valid" names in the table to the right so that Bob does not return "Bob" as the closest match (since we only want to return names that are valid anyways).
I have attached an image of the data below (with column J being my desired results)
Name
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Valid (Y/N)
Desired Combined Closest Match
Calculated Closest Match
Bob
100
25
750
40
750
750
750
N
Susan
Susan
Susan
100
25
500
25
1000
1000
1000
Y
Susan
Susan
Karen
75
30
500
50
Y
Karen
Karen
Michele
100
30
500
50
Y
Michele
Michele
Tom
75
30
240
30
Y
Tom
Tom
Rob
100
30
1000
30
Y
Rob
Rob
Brian
100
30
1000
50
N
Rob
Susan
Stacy
100
30
500
50
Y
Stacy
Stacy
Rachel
100
30
500
50
2000
2000
2000
Y
Rachel
Rachel
Jeff
100
30
500
50
1000
1000
1000
N
Susan
Susan
I am able to do this only using 1 column of data, but I am unsure how to combine them. I used INDEX, MATCH, MIN, and ABS functions to figure out the closest match based on one column (Sunday). Here is an example of my formula for Brian (it is supposed to return "Rob" as the result, but returns "Susan" because I only am using one day of data):
=IF(I8="Y",A8,INDEX($M$2:$M$8,MATCH(MIN(ABS($N$2:$N$8-B8)),ABS($N$2:$N$8-B8),0)))
Assuming I have the following test DataFrame df:
Car Sold make profit
Honda 100 Accord 10
Honda 20 Fit 5
Toyota 300 Corolla 20
Hyundai 150 Elantra 20
BMW 20 Z-class 100
Toyota 45 Lexus 7
BMW 50 X-class 30
JEEP 150 cherokee 2
Honda 20 CRV 5
Toyota 30 Yaris 3
I need a summary statistic table for number of cars sold, by type of car.
I can do that this way:
df.groupby('Car')['Sold'].describe()
this gives me something like the following:
Car count mean std min 25th 50th 75th max
BMW 2
Honda 3
Hyundai 1
JEEP 1
Toyota 3
The 'Car' column values are listed in the summary statistic table in alphabetically ascending order. I am looking for a way to sort it in my own pre-specified way. I want the summary statistic table to be listed as "Toyota, Hyundai, JEEP, BMW, Honda"
df.groupby('Car')['Sold'].describe().loc[["Toyota", "Hyundai", "JEEP", "BMW", "Honda"]]
helps me put it in order, but I am not able to do it for multi-level indexing. For instance, if I want the summary statistics table by 'Car', and further by the make, .loc does not give me the desired solution.
I am Trying to Normalize Records of My SOurce table using Normalize Transformation in informatica, But Sequence are not re-generating for different rows.
Below Is SOurce Table :
Store_Name Sales_Quarter1 Sales_Quarter2 Sales_Quarter3 Sales_Quarter4
DELHI 150 240 455 100
MUMBAI 100 500 350 340
Target Table :
Store_name
Sales
Quarter
I am Using Occurrence - 4, on Sales Column for getting GCID Sales.
For Quarter, I am Using GCID Sales column :
O/P :
STORE_NAME SALES_COLUMN QUARTER
Mumbai 100 1
Mumbai 500 2
Mumbai 350 3
Mumbai 340 4
Delhi 150 5
Delhi 240 6
Delhi 455 7
Delhi 100 8
Why Quarter Value is not restarting from 1 for Delhi and is continuing from 5 ?
There is a GK column that keeps sequential numbers for all rows. Definitely, GCID is the right column that keeps numbers per multi-occurrences in a row. So, double check that there is GCID port and not GK that is linked to QUARTER port to target…
It’s good to provide a screenshot for the mapping and for the normalizer transformation (Normalizer tab) to be more informative about your question/issue…
But I suppose you have 'Store_Name' port at level 1 and all 'Sales_Quarter1', 'Sales_Quarter2', 'Sales_Quarter3' and 'Sales_Quarter4' ports grouped at level 2 on Normalizer tab (using >> button at top left area). And at group level (for these four ports) you set the Occurrence to 4.
I apologise if the title is confusing. it's hard for me to summarise this issue in one sentence.
I'm trying to automate some spreadsheets, but sadly using VBA is not an option (most people here get confused by them and end up avoiding those spreadsheets).
The problem: I have rows in one sheet with data for velocity and angle and I'm trying to get a value from this other table based on those parameters.
The issue is that this other table is based in ranges of values for both columns and rows.
A B C D E
1 0 1-30 31-60 61-90
2 0 to 1 10 20 20 30
3 1.1 to 2 10 20 30 30
4 2.1 to 3 20 30 30 40
5 '>3 30 40 40 40
Where column A is velocity range, Row 1 is angle range
So for example if I have a velocity of 1.5 m/s with an angle of 40°, I want to be able to get the result of 30.
My best idea is to create auxiliary or helper columns to indicate which velocity and angle range they belong to and then use a VLOOKUP MATCH combo.
Even though it's a simple solution, I just wanted to know if there is a more elegant solution available that comes to mind or if you think this is already elegant enough.
Thanks.
As Scott mentioned, using ranges as titles makes it difficult.
If you simply put in the minimums instead youcan make the following:
A B C D E F G H
1 0 1 31 61 Velocity 1.5
2 0 10 20 20 30 Angle 40
3 1.1 10 20 30 30 Result 30
4 2.1 20 30 30 40
5 3.1 30 40 40 40
Where H1 and H2 are your input cells.
H3 gives you the result with: =INDEX(B2:E5,MATCH(H1,A2:A5,1),MATCH(H2,B1:E1,1))
So I'm working on a workbook right now that is across 3 sheets, 'Data', 'RAW', 'Lookup'. On the Data tab it looks like, Sheet 1
A B C D E
Segment Ranking Amount Revenue Spend
Carbon 15 2 5000 550
Oxygen 30 3 6895 450
Minerals 45 1 4400 350
The Code I use for each column are as follows (Some of the Columns are named columns)
B =IF(NOT(ISERROR(SEARCH("OK",$A2))),SUMIFS(RAW!B:B,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*"),SUMIFS(RAW!B:B,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*",Output,"<>*OK*"))
C =IF(NOT(ISERROR(SEARCH("OK",$A2))),SUMIFS(RAW!C:C,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*"),SUMIFS(RAW!C:C,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*",SegmentName,"<>*OK*"))
D =IF(NOT(ISERROR(SEARCH("OK",$A2))),SUMIFS(RAW!D:D,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*"),SUMIFS(RAW!D:D,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*",Output,"<>""OK"))
E =IF(NOT(ISERROR(SEARCH("OK",$A2))),SUMIFS(Spend,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*"),SUMIFS(Spend,Output,"*"&INDEX(SegmentID,MATCH($A2,SegmentName,0))&"*",Output,"<>*OK*"))
The RAW Sheet looks like (Sheet 2)
A B C D E
Output Ranking Amount Revenue Spend
Random_1234_Random 15 2 5000 550
Random_5678_Random 30 3 6895 450
Random_9102_Random 45 1 4400 350
Random_555_Random 60 4 4000 300
The Lookup Sheet Looks like (Sheet 3)
A B
Segment ID
Carbon 1234
Oxygen 5678
Minerals 9102
Carbon 555
The problem that I have right now is, it will only grab the first Carbon with ID 1234, and not grab the second Carbon with ID 555 at all resulting in:
A B C D E
Segment Ranking Amount Revenue Spend
Carbon 15 2 5000 550
The end result that I would like is for it to grab ALL Carbon with any ID and add all of them together as below into a single line. (RAW sheet, Random_1234_Random + Random_555_Random)
A B C D E
Segment Ranking Amount Revenue Spend
Carbon 75 6 9000 850
Any help would be great and if I need to provide more detail please let me know!
Thank you in advance,
Maykid