I would like to check how do I display decimals for primefaces ver 3.3 pie chart label?
Currently, there are two proportions in my chart. Label A and Label B. Label A has a very big number like 100000 but label B has 100. Therefore, in the pie chart, Label A is not 100%. However, primefaces converts this to 100% which is wrong. Is there any way I can show the decimal places instead of whole numbers as labels on the pie chart?
Define an extender function like:
function ext() {
this.cfg.seriesDefaults.rendererOptions.dataLabelFormatString = '%.4s%%';
this.cfg.seriesDefaults.rendererOptions.dataLabelThreshold = 0;
}
This will format your output labels to show percentage up to 4 digits after the decimal point. Also jqPlot by default, for areas smaller than 3% won't display any labels. You have to overwrite this value with dataLabelThreshold = 0.
Finally attach this extender function on your p:pieChart:
<p:pieChart id="sample" value="#{testClazz.pieModel}"
extender="ext" showDataLabels="true"/>
Define an extender function like:
function ext() {
this.cfg.seriesDefaults.rendererOptions.dataLabelFormatString = '%#.4f';
this.cfg.seriesDefaults.rendererOptions.dataLabelThreshold = 0;
}
in my case '%.4s%%' (PF 4.0) is not working so instead of I used'%#.4f' that work fine.
Related
My DataFrame looks similar to this:
name
reached points
Jose Laderman
13
William Kane
13
I am currently displaying the aggregated count of students reached points of an assignment on an Altair bar chart within Streamlit like this:
brush = alt.selection(type='interval', encodings=['x'])
interactive_test = alt.Chart(df_display_all).mark_bar(opacity=1, width=5).encode(
x= alt.X('reached points', scale=alt.Scale(domain=[0, maxPoints])),
y=alt.Y('count()', type='quantitative', axis=alt.Axis(tickMinStep=1), title='student count'),
).properties(width=1200)
upper = interactive_test.encode(
alt.X('reached points', sort=alt.EncodingSortField(op='count', order='ascending'), scale=alt.Scale(domain=brush, domainMin=-0.5))
)
lower = interactive_test.properties(
height=60
).add_selection(brush)
concat_distribution_interactive = alt.vconcat(upper, lower)
Which produces this output and everything looks fine
The information I want my tooltip to show is a list of students that reached the specific amounts of reached points I'm hovering over. When adding something like:
tooltip='name'
the way my bar chart seems to display values has now been altered to this
When adding something like
tooltip='reached points'
The data seems to be displayed normally but without a tooltip that gives me the necessary information. Is it possible to display tooltip data that isn't used in my x or y axis but still part of the DataFrame I'm putting into the chart?
I am using IceFaces, ace:chart to display chart in my application.On my y-axes, I have values in fractions (61.3, 62.1 etc). But, when graph is rendered values are rounded off to whole number (61,63 etc)
Is is possible to display values in fractions ?
Found the answer finally !!! we have to put setFormatString while setting y axes.
private Axis[] yAxes = new Axis[] {
new Axis() {{
setLabel("Power level (dBuV)");
setFormatString("%.1f");
}}
};
I Need 10 different Colors in Pie chart Using the Library of pykcharts.
Is it possible Because As per the Documentation they Provide only one shade_color.
Go through this link http://pykcharts.com/tour/pie
#Tkingovr chart_color is for all charts but One dimensional. You can use shade_color for One dimensional charts https://github.com/pykih/PykCharts.js/wiki/Colors#shade-color
#KIRANJOSHI
var selector = "pieContainer", // selector of your chart
colors = ["red","blue","green","yellow","orange"];
setTimeout(function() {
d3.selectAll("#" + selector + "_svg path.pie")
.attr("fill",function(d, i) {
return colors[i];
});
},1000);
setTimeout is required since the chart may take time to render and there is no provision in the current version to run a piece of code on chart render complete.
According to the documentation you should be able to pass in values like this:
{
"chart_color": ["blue","green","Yellow"]
}
The chart also accepts any of the following:
Color Names (Eg: "red")
Hex values (Eg: "#B0171F")
RGB values (Eg: "rgb(176,23,31)" )
I found this solution.
If type of chart is pie, how specify parameters (x,y) of highlight(x, y)?
Thanks
Sorry for my bad English.
Unfortunately, flot doesn't expose the pie highlighting code to the user. So we are pretty much out of luck, but what may work for you is synthesizing a click event at the appropriate place on the page:
$("#highligher").click(function () {
var e = jQuery.Event('click');
e.pageX = 250; //add a made up x/y coordinate to the click event
e.pageY = 250;
$('#plot canvas:first').trigger(e); //trigger the click event on the canvas
});
Here it is in action: http://jsfiddle.net/ryleyb/mHJm5/
The problem is you have to know where the slice you want to highlight is already. This would be easy enough to set if the graph is static. If it's a dynamic graph, you'd have to dig into the source of the pie code to figure out how to calculate where the pie slice is. It might be easier in that case to just have a copy of all the pie functions and manually draw on the pie overlay.
Just got this working by altering a few things...
I changed highlight and unhighlight in jquery.flot.pie.js to pieHighlight and pieUnhighlight.
Then, after these two lines in jquery.flot.pie.js...
plot.hooks.processOptions.push(function(plot, options) {
if (options.series.pie.show) {
I added...
plot.highlight = pieHighlight;
plot.unhighlight = pieUnhighlight;
We're maintaining selection state outside of the chart (as a backbone model). When a selection event (click) occurs, we set the selected slice in the model. When selection changes, we refresh the chart using a selection color for the pie slices that are selected.
var data = [];
var color = slice.index == selected ? '#FF0000' : '#0000FF';
data.push({label:slice.Label,data:slice.Value,color:color});
The snippet above uses blue for all non-selected slices, red for the selected slice. Your color logic will be more sophisticated.
NOTE: You can also use rgba CSS for the colors, which gives a really nice effect. For example:
var color = slice.index == selected ? 'rgba(0,0,255,1)' : 'rgba(0,0,255,0.5)';
I have stacked bar chart in which the number of columns is dynamic, can change from 1 to n columns. I want the spacing between the charts and width of the bar to be consistent. How do I fix it. Please suggest solutions / ideas.
In a Stacked Bar chart, you can change the spacing between bars using
CategoryAxis.setLowerMargin
CategoryAxis.setMargin and
CategoryAxis.setUpperMargin
Code is below
protected JFreeChart generateGraph() {
CategoryAxis categoryAxis = new CategoryAxis("Categories");
categoryAxis.setLowerMargin(.01);
categoryAxis.setCategoryMargin(.01);
categoryAxis.setUpperMargin(.01);
categoryAxis.setCategoryLabelPositions(CategoryLabelPositions.UP_90);
ValueAxis valueAxis = new NumberAxis("Values");
StackedBarRenderer renderer = new StackedBarRenderer();
renderer.setBarPainter(new StandardBarPainter());
renderer.setDrawBarOutline(false);
renderer.setShadowVisible(false);
renderer.setBaseItemLabelsVisible(true);
renderer.setBaseItemLabelGenerator(new StandardCategoryItemLabelGenerator());
CategoryPlot plot = new CategoryPlot( _dataset,
categoryAxis,
valueAxis,
renderer);
plot.setOrientation(PlotOrientation.VERTICAL);
JFreeChart chart = new JFreeChart( "Title",
JFreeChart.DEFAULT_TITLE_FONT,
plot,
true);
//ChartFactory.getChartTheme().apply(_chart);
return chart;
}
StackedBarRenderer devotes some effort to making the "spacing between the [bars] and width of the bar to be consistent." It's not clear what you want it to do differently as the number of columns changes. The relevant geometry is determined by the parent BarRenderer in such methods as calculateBarWidth(), which can be overridden as desired. Also, verify that there is a value for each category in each series.